How to Install an Exterior Light Fixture on Stucco Step by Step Guide
- Step 1: Turn Off the Power to The Circuit ...
- Step 2: Use a Drill to Make Holes for the Mounting Hardware ...
- Step 3: Install the Mounting Hardware ...
- Step 4: Attach the Light Fixture ...
- Step 5: Screw the Light Fixture Into Place ...
- Step 6: Turn on the Power and Test the Light ...
How to hang lights on stucco without doing damage?
USE ADHESIVE HOOKS
- Pick the right adhesive strips. There are a variety of adhesive strips with hooks that you can use. ...
- Clean the wall or surface. Using rubbing alcohol, you can clean or scrub the surface to prepare it for the adhesive application.
- Point and mark the area where you want to apply the hooks. ...
- Attach the hooks to the stucco. ...
How to install an exterior light fixture on stucco?
Wire the New Light Fixture
- Wrap the ground wire from the fixture to the ground bolt on your mount. ...
- Screw the bolt down tightly so it is held firmly in place.
- Twist the ground wire coming from your light fixture to the ground wire coming from the wall using a clockwise motion. ...
- Twist your wire cap on to secure the two wires.
How do I hang lights on stucco?
Method Two: Using Glue
- Make Small Holes in the Plaster. Tap lightly on your stucco to see if it has Styrofoam backing. ...
- Check If the Plaster Contains Styrofoam. According to hunker.com, you should avoid using hot glue if your stucco is painted. ...
- Install the String of Lights. Remove the light bulbs before installing your strings of lights. ...
- Use Bead Glue to The Side. ...
What can I use to hang Christmas lights on stucco?
Method 1 Method 1 of 3: Attaching Your Lights with Glue Download Article
- Tap lightly on your stucco to see if it has Styrofoam backing. Hot glue can melt Styrofoam backing. ...
- Avoid using hot glue if your stucco is painted. Hot glue is great for attaching your Christmas lights to stucco but will cause peeling on painted surfaces.
- Remove the light bulbs prior to installing your strings. ...
How to Hang String Lights Using Glue
Make sure your stucco does not have any Styrofoam backing because it can melt under hot temperatures (hot glue).
How to Hang String Lights Using Double-sided Tape
Clean up the stucco surface that will hold the tape. Use a soft brush and tri-sodium phosphate to clean the surface. Use some rubbing alcohol to make the surface extra-clean. Just apply the rubbing alcohol on a microfiber dry cloth and gently wipe the surface.
Conclusion
Stucco is a soft wall that should be handled with a lot of care. This is why many homeowners are advised to avoid a drill when you want to hang patio string lights on stucco. Using glue and double-sided tape are the best options. However, nowadays there are plastic roof clips and bulb holders that come with glue on the holding side.
What do exterior light fixtures do to stucco?
Exterior light fixtures add style and character to a stucco wall.
What to do if there is no junction box?
If there is not an existing junction box, contact a licensed electrical contractor to have one professionally installed. It is very important that all exterior electrical fixtures are mounted to a junction box so that they will not be a fire hazard.
When did Chris Varnell start writing?
Chris Varnell began writing professionally in 2010, with his work appearing primarily on eHow and Answerbag. He has worked in the construction industry for 10 years on projects ranging from high-rise construction to residential home building.
Who to consult for electrical wiring?
If you are unsure about electrical wiring procedures, consult a licensed electrician.
What to do if no studs are available?
If no stud is available, use the power drill with a correctly sized drill bit to drill pilot holes for each toggle bolt at the connection point markings.
What is a drill bit stucco?
Drill bit (size dependent on toggle bolt size) Stucco is a common exterior veneer used in residential and commercial construction. Low installation costs and extreme durability make it a desirable choice for use in most climates. Attaching items to an exterior stucco wall may be necessary during structural additions, for repairs, or for decoration.
How to determine the size of toggle bolts?
The size of the necessary toggle bolts is determined by the weight of the item to be attached . This information can be found on the toggle bolts' packaging.
Can you attach a fixture to stucco?
Attaching items to an exterior stucco wall may be necessary during structural additions, for repairs, or for decoration. If a wall stud is not available at the desired location, the most common way to attach a fixture to a stucco wall is with toggle bolts. Advertisement.
