Cutting and Installing Plastic Trim
- Cut with carbide-tipped saw blades and bits. ...
- Fasten PVC trim with stainless steel screws or hot-dipped siding nails. ...
- Cement seams for sturdy, watertight joints. ...
- Preassemble window and door trim. ...
- Preassemble corner PVC boards. ...
- Leave expansion gaps on long pieces. ...
- Fill fastener holes before you paint. ...
- Splice long trim pieces with scarf joints. ...
How to replace wood trim with PVC?
You can replace damaged wood trim with PVC trim, which is not susceptible to water damage, to prevent such problems from occurring in the future. Cut the caulk seal between the trim and the siding with a utility knife. Position a flat pry bar against the siding and behind the trim, and pry the trim away from the siding.
How to heat form PVC trim?
The process itself is straightforward, though an experienced trainer is recommended the first time:
- Create a wooden jig or template conforming exactly to the desired curve.
- Use the two heat blankets to soften a length of AZEK trim to about 300° F for seven to 10 minutes. The trim will have the consistency of cooked spaghetti.
- Gently place the softened trim in the wooden template.
- Clampdown. Let cool. The curved trim will hold its shape indefinitely.
How to attach Baseboard trim to drywall?
- To scribe, set the compass points to 1/4 inch apart. ...
- Drag the compass point along the floor, drawing a line across the bottom of the baseboard.
- Remove the board and set it onto a cutting surface.
- Set the circular saw blade depth to the depth of the board, and on a 5-degree bevel with the face of the cut toward the wall.
How to attach casters to PVC pipe?
To connect Caster Fitting Inserts into PVC fittings:
- Insert the Caster Stem into the Caster Fitting Insert. …
- Tighten the nut on top of the Caster Fitting assembly until secure.
- Insert the entire Caster Fitting assembly into the socket of a 1-1/4″ PVC fitting.
Should I nail or glue PVC trim?
Cement the Joints One advantage of PVC is that you can “weld” joints to keep them tight and prevent water from penetrating behind the trim. Manufacturers recommend a special type of PVC cement that has a longer “open time” than the type of cement that plumbers use on plastic pipes.
How do you fasten PVC trim?
0:040:53How to Fasten PVC Mould and Trim - YouTubeYouTubeStart of suggested clipEnd of suggested clipStandard nail guns do work well with a sec trim. Products if you choose to use pneumatic toolsMoreStandard nail guns do work well with a sec trim. Products if you choose to use pneumatic tools regulate. The air pressure so fasteners slightly penetrate the surface.
Does PVC trim need to be glued?
0:071:09How to Glue PVC Trim and Molding - YouTubeYouTubeStart of suggested clipEnd of suggested clipAlways. Remember that you must install at least two fasteners on each side of a board joint. WhetherMoreAlways. Remember that you must install at least two fasteners on each side of a board joint. Whether you use a scarf joint or a miter joint. If you need to bond a Zek material to other substrates.
What nails do you use for PVC trim?
Cellular PVC manufactureres recommend high-quality fasteners such as stainless steel or hot-dip galvanized. In sea-coastal areas, TYPE 316 stainless steel nails are recommended.
What is the best adhesive for PVC trim?
Titebond Ultimate PVC Trim AdhesiveTitebond Ultimate PVC Trim Adhesive and Sealant is a one-component, advanced polymer adhesive sealant designed for a variety of PVC trim, moulding, deck railing and beadboard installations. It adheres and seals PVC trim to virtually any material including wood, metal, masonry, other PVC trim and more.
Can you use Liquid Nails on PVC trim?
LIQUID NAILS® Siding and Trim Construction Adhesive, LN-501, is formulated for use as a fast-setting, high-performance adhesive that bonds PVC shims to PVC siding and PVC trim components to common construction surfaces.
Does Gorilla Glue work on PVC trim?
Gorilla Glue can be used from 32 to 140° F. It is environmentally friendly and cleans up with water. The amazing thing about this glue is that it will work on all kinds of pipes, from the smallest PVC pipe up to a 6" diameter pipe.
Should PVC trim be primed before painting?
Does PVC trim require a primer? A primer is only needed if you want the paint manufacturer's warranty. Excellent adhesion can be achieved by properly cleaning the board before applying a topcoat of paint to PVC trim.
Can you use construction adhesive on PVC trim?
A good choice is PVC pipe glue or a product specially formulated for PVC lumber. For bonding PVC to wood, use a subfloor or heavy-duty construction adhesive.
How do you attach white PVC trim?
3:565:20How to Install PVC Trim & Mouldings - YouTubeYouTubeStart of suggested clipEnd of suggested clipSlide it together this allows for the expansion. Contraction on these larger pieces. And again you'MoreSlide it together this allows for the expansion. Contraction on these larger pieces. And again you'll nail it or screw it no greater than 16 inches on. Center.
How do you cover nail holes in PVC trim?
0:371:53Filling Nail Holes in VERSATEX PVC Trimboard - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can use a two-part methyl methacrylate like bond and fill or trim welder by extreme adhesives.MoreYou can use a two-part methyl methacrylate like bond and fill or trim welder by extreme adhesives.
Can you screw into PVC board?
4. Fastening your PVC Trim Boards. When selecting your fasteners, stainless steel screws are the best options because they will never rust and prevent the board from bleeding if the PVC board is unpainted. Stainless steel screws with small finish heads are the best choice for your house trim exterior.
Does Gorilla Glue work on PVC trim?
Gorilla Glue can be used from 32 to 140° F. It is environmentally friendly and cleans up with water. The amazing thing about this glue is that it will work on all kinds of pipes, from the smallest PVC pipe up to a 6" diameter pipe.
Can you screw into PVC board?
4. Fastening your PVC Trim Boards. When selecting your fasteners, stainless steel screws are the best options because they will never rust and prevent the board from bleeding if the PVC board is unpainted. Stainless steel screws with small finish heads are the best choice for your house trim exterior.
Can you nail AZEK Trim?
Standard nail guns work well with AZEK Trim and Moulding products. If using pneumatic tools, the air pressure should be regulated so fasteners slightly penetrate the surface.
How do you nail PVC quarter round?
Use the nailer or hammer and nails to attach the molding to the baseboard. Be sure you hold the quarter round tight against both the baseboard and floor for a tight fit. To hand-nail molding, drive each nail almost flush with the quarter round, then use the nail set to sink the head beneath the surface.
About Video Series
Fine Homebuilding is constantly producing new videos to provide you with the details and techniques you need to build beautiful, high-quality homes. Watch all of our videos to see builders, remodelers, and other tradespeople demonstrate how to do a top-notch job when installing foundations, roofs, and everything in between.
Newsletter
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Can you use 2P10 on PVC?
If you use 2P-10, be careful — and don’t use the activator: It will melt the PVC and bond your fingers to the plastic instantly. I don’t bother using any adhesive on cope joints, whether I’m working with wood or PVC trim — there’s nothing to glue to and no reason for it.
Can you use Titebond II to fill holes in PVC?
On the interior of a home, nail holes in PVC can be filled with almost anything used with wood; Bond-and-Fill is a safe choice. To glue joints together, use PVC cement, since wood glues like Titebond II don’t work all that well with PVC.
