The process is fairly simple:
- Step 1: Clean the area. ...
- Step 2: Measure the quarter round and cut it to fit the length of your baseboard.
- Step 3: With medium-grit sandpaper, scuff the side of the quarter round that will be set against the baseboard. ...
- Step 4: Apply adhesive or glue evenly on the scuffed side of the quarter round.
How do you nail a quarter round baseboard?
How to Nail Quarter-Round Baseboard 1 Sweep the corners of the wall and along the wall edges to remove dirt and debris. 2 Place the quarter-round against the molding and butt it up to the corner or the wall if necessary. ... 3 Position a 1-1/4-inch finishing nail at the middle of the molding two inches from the end. ... More items...
How to install quarter round molding?
The most common way to install quarter round molding is using nails. You can either do this manually or use a nail gun. Let’s start by looking at the manual method: Step 1: Sweep the dirt and debris off the wall. Ensure that the surface is clean, including the edges of the wall where the molding will be placed.
How do you attach molding to baseboard?
Step 1: Sweep the dirt and debris off the wall. Ensure that the surface is clean, including the edges of the wall where the molding will be placed. Step 2: Cut the molding to fit the length of the baseboard. To do this, lay the entire molding against the baseboard and use a pencil to mark the edges of the baseboard.
How do you cut a corner for baseboard?
For corners that don’t measure exactly 90-degrees, make a butt cut in the first piece of quarter round and install it in the corner with the butt end hidden against the opposing baseboard corner. Make a coped joint cut in the second piece of the corner and install it with the cut end directly against the profile of the opposing quarter round piece.
Should you glue or nail quarter round?
A: Quarter-round should be nailed to the base boards only. It is intended to hide gaps between the base and floor. It should also permit a little movement in the flooring. Plus, it absorbs the impact of feet and furniture legs, so you may want to replace it sometime—thus, don't glue it.
How do you fasten quarter round molding?
InstructionsMeasure and Mark the First Trim Piece. ... Miter-Cut the First Molding Piece. ... Test-Fit the First Piece. ... Cut the Second Piece. ... Test-Fit the Second Piece. ... Nail the First Two Pieces, and Continue. ... Create a Return Piece to Finish the Ends. ... Measure and Mark the Return Piece.More items...•
How do you nail quarter round with a hammer?
Step 1: Cut molding. ... Step 2: Lay molding against wall, flush with the floor. ... Step 3: Hammer your finishing nail almost all the way into the wall. ... Step 4: Use the nail set to drive the nail the rest of the way in. ... Step 5: Finish with sealant. ... Step 6: Cover nail heads.More items...•
Do you need to install quarter round with baseboards?
Because sometimes there are still gaps between the floor and baseboard. At this time, the quarter round is applied to cover the gap between the bottom of the baseboards and the floor. Therefore, installing a quarter round on baseboard is not necessary unless there is still a gap between your baseboard and the floor.
What kind of nails do you use to to attach quarter round?
Attaching Quarter Round Because it's finish trim, install quarter round with finish nails, which have smaller heads than standard nails. A finish nail gun, fitted with 1.5- or 2-inch finish nails, works well. You can also drive finish nails the old-fashioned way -- with a hammer.
How do you install quarter round molding without nails?
Alternatively, for an odd inside corner, fit one piece of quarter round into the corner with a blunt edge, and cut the other at a 45. Use a coping saw to shave the underbelly of the piece along the cut edge, and then place the piece on top of the blunt-edge piece. Bam! Clean and perfect inside corner.
Do you caulk between quarter round and baseboard?
Installing quarter round on baseboards with caulk is not a good idea because it can be difficult to remove should you need to repair the floor in the future. It is not the right choice because it won't create a strong enough bond like glue will. Use caulk only for what it was designed for: to fill gaps if necessary.
Can I use hammer for quarter round?
Hold the nail so it is parallel to the floor. Hammer the nail through the quarter round into the baseboard. You should stop hammering when about 18-inch of the nail is sticking out.
How do you nail quarter round molding?
1:546:30Installing quarter round molding - YouTubeYouTubeStart of suggested clipEnd of suggested clipVideo. Okay so the goal is to drive the nail in almost all the way but not completely there becauseMoreVideo. Okay so the goal is to drive the nail in almost all the way but not completely there because at that point you will be hitting the molding.
Should baseboards touch the floor?
Baseboards should only touch the floor if you have no plans to carpet your floors and if you've already finished installing your other flooring. If you have yet to install the rest of your floor, carpet or otherwise, you'll need to take into account the height of the installed flooring.
How do you fill the gap between baseboard and floor?
Use Caulk to Fill the Gap You will want to line the floor with blue painter's tape to minimize cleanup. You'll want to use a paintable latex silicone caulk to fill the gap. Once the caulk is dried, paint the caulk to match the baseboards.
What is the difference between shoe mold and quarter round?
Quarter-round molding earns its name from its unique design, possessing a curved, perfect quarter-circle appearance. On the other hand, shoe molding has slightly sharper edges than quarter-round and looks more like a triangle than a circle.
Can you use a pin nailer for quarter round?
Pin nailers are most useful for fastening thin materials like veneers and delicate trim pieces to furniture. Brad nailers are ideal for trim work like attaching lightweight molding on cabinets, decorative molding on furniture, quarter round, shoe molding, and door stop molding.
Can I use brad nails for quarter round?
Brads are excellent for trim work, including narrow trim around windows or doors, shoe moulding and quarter-round moulding. Finish nails are versatile nails with a 15- or 16-gauge diameter. They're designed for thicker cuts of wood.
How do you connect quarter round?
14:5016:54How To Install Quarter Round Like A Pro - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou just slide the cord around into the silicone. And nail it. Off. Make sure you're nailingMoreYou just slide the cord around into the silicone. And nail it. Off. Make sure you're nailing straight into the baseboard.
How do you attach shoe molding?
0:464:05How to install shoe molding, tips on designing interior trim ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe way I like to go about it is to install the casing first and that's around the doors. And theMoreThe way I like to go about it is to install the casing first and that's around the doors. And the windows. And. Then I install the baseboard molding and then once the floors have been finished.
How to nail a round in a baseboard?
Hold the nail so it is parallel to the floor. Hammer the nail through the quarter round into the baseboard. You should stop hammering when about 18-inch of the nail is sticking out. Now grab your nail setter and align it with the top of your nail. Hammer the nail setter until your nail is all the way inside the round.
What is quarter round molding?
Quarter round molding is very useful in hiding the gaps between pieces of wood, such as baseboards and flooring. It is commonly attached to the walled corners of wooden flooring to provide an elegant finish to the edges. It can get a little complicated to install given the type of wood used and the angles to be covered.
How to use a nail gun for flooring?
When using a nail gun, Instead of using a nail set and nails, you can attach the kind of nail you want on your gun and use it to drive the nails across the quarter round. Make sure that you position your nail gun at a 45-degree angle and insert your first nail starting from the corner of the flooring.
How to cut quarter rounds?
Take your marked quarter rounds and use a miter saw to cut at the marks. Place your miter saw at a 45 -degree angle to make the cut. Make sure that the adjacent quarter round has an opposite 45-degree cut so the two pieces come together without any gaps. For creating a straight joint between two quarter rounds you can cut at ...
How to make a straight joint between two quarter rounds?
For creating a straight joint between two quarter rounds you can cut at either 45 degrees or 30 degrees in the opposite direction. Step 3: Lay the quarter round flush against the wall. Make sure to support the molding securely against the wall or the corner. Step 4: Point a 1-1/4-inch nail at the middle of the molding.
What to use to fill gaps in baseboard?
This is usually the case when working on older baseboards which are likely to contract or expand with wear and tear. In such cases, use wood putty to fill the gaps. Save the last coat of paint for the end, so that it covers all blemishes and minor color differences between the putty and the quarter round.
Can you glue baseboards?
When using glue it is likely that the glue will ooze from the edges or joints in the baseboard. Make sure that any excess glue is immediately wiped off before allowing the pieces to dry. You would also need to scuff the rounds carefully with sandpaper to matte out any protrusions in the wood.
How to cut molding in a miter box?
Set the handsaw to 45-degrees or place the molding next to the correct slot in the miter box. Place the trim piece on the miter box or saw base, so the blade just touches the pencil mark. Make your first cut, then reverse the saw to cut 45-degrees for the other end of the trim.
What angle is a quarter round corner?
Most wall corners are not a perfect 90-degree angle. They can be off by a degree or more, causing an unsightly gap where the quarter round ends meet. To avoid mistakes, purchase a Digital Angle Finder Protractor. It is two metal rulers hinged together at one end with a digital readout at the hinge.
What Is Quarter-Round Trim?
Quarter-round molding, as the name implies, is one-quarter of a long section of a round wood doweling or rod. The cross-section is a 90-degree arc. Sometimes the baseboard is too thin to cover the expansion gap between the floor and the wall, which can be as wide as 5/8-inches (15mm). Other times, the baseboard may leave gaps. Installing quarter round trim on baseboards covers gaps for a smooth, rounded finish to the baseboard and floor.
What to use to fill holes in brad nailer?
If the brad nailer was set incorrectly or you nailed it by hand, drive them deeper using a nail set and hammer. Use paintable wood putty to fill in any nail holes or noticeable gaps. Caulk is an alternative to putty if you installed quarter round with a white finish.
What to do if brad nailer is set incorrectly?
If the brad nailer was set incorrectly or you nailed it by hand, drive them deeper using a nail set and hammer.
How wide is a baseboard?
Sometimes the baseboard is too thin to cover the expansion gap between the floor and the wall, which can be as wide as 5/8-inches (15mm). Other times, the baseboard may leave gaps. Installing quarter round trim on baseboards covers gaps for a smooth, rounded finish to the baseboard and floor.
What is the difference between shoe molding and quarter round molding?
The main differences between the two are: A quarter round is a perfect 90-degree radius or one-quarter of a circle. Typically, it measures 3/4” x 3/4” with a 3/4” radius profile. Shoe molding has a narrower, squat profile of 7/16” wide and 11/16” high.
What is quarter round molding?
Quarter rounds, which are one type of shoe molding, add a finished look to any room while covering gaps between the floor and baseboards. They can be painted or stained to form a stylish border around any room.
How to make quarter round caulk look even?
Run your finger around the tops of the quarter rounds to push the caulk down behind them. Do the same with any gaps between individual pieces as well. Try to make the caulk look as even and hidden as possible. When you're done, wipe up the excess with a damp rag.
How to cut molding 45 degrees?
If you don't have a miter saw, use a hand saw, holding the molding in place with a miter box. These guide the saw to make a perfect 45° angle. Keep in mind these are a little tougher to use for cutting corners, since you need to carefully cut the wood at the proper angle by hand.
How to cut molding with a miter saw?
After making the first cut, turn the blade around to the 45° mark on the opposite side of the saw's base, then cut the second quarter round.
What is the best way to cut a piece of wood?
Using a miter saw is the easiest way to make the cuts and may produce better-looking results. Also, you may need to cut off very thin slices to make the pieces fit, and this almost requires a miter saw. They can be rented at tool rental shops.
How to measure for quarter round nails?
Mark spots for nails every 12 in (30 cm) along the quarter rounds. Start at the corners and measure along the length of each piece of molding. Using a pencil, make the marks along the middle of each quarter round. This can be a little tedious, but it ensures the quarter rounds fit neatly and properly.
What paint should I use to match a wood floor?
Buy bare wood quarter round and stain it to match hardwood floors. You could also buy primed quarter round, which is flat white, and paint it with semi-gloss paint to match the baseboard. You must use this paint to paint over the nails, which will be covered with caulk.
What Is The Purpose Of Quarter Round?
As the name implies, quarter round molding is a convex molding that is one-quarter of a round piece of wood. It is always seen where the floor meets the drywall. Also, you can see it staying at the bottom along the baseboard.
Is It Necessary To Install A Quarter Round On Baseboard?
The purpose of baseboard installation is more than aesthetic. It has the same function as the quarter round molding–to protect the floor expansion gap. If the gap between the wall and floor is not so wide, maybe only using a quarter round is enough.
What Materials Pair With Quarter Round
The quarter round comes in a variety of sizes and materials. Generally, the average quarter round measures up to 7 feet long. Its height and width are made of pieces of about 3/4 inches. The main kinds of construction of quarter round are as follows: hardwood, softwood, engineered wood, PVC, and Medium-density fibreboard.
How To Install Quarter Round On Baseboard?
Step1: Firstly, measure each wall that you would like to install the quarter round molding. Then try to fit the quarter round to the baseboard and make the marks. After marking, you can begin to cut the molding into equal quarters. Make your first cut, then reverse the saw to cut 45-degrees for the other end of the trim.
Step 1
Sweep the corners of the wall and along the wall edges to remove dirt and debris.
Step 2
Place the quarter-round against the molding and butt it up to the corner or the wall if necessary. Start at one end and press the quarter-round molding tightly against the baseboard.
Step 3
Position a 1-1/4-inch finishing nail at the middle of the molding two inches from the end. Hold the nail so it is nearly perpendicular to the floor. Hammer the nail through the quarter-round and into the baseboard with a hammer. The finishing nail is thin enough to not split the quarter-round and long enough to anchor the molding.
Step 4
Continue nailing the quarter-round, placing nails every 12 inches along its length. Go back and place the tip of a center punch on each nail head. Tap the center punch with a hammer to countersink the heads into the wood.