How To Install Spindles
- Cut the Handrail The first step is to measure in between the posts to get the handrail measurement. ...
- Determine Spacing The next step is to determine how far apart you should place your spindles. ...
- Selecting Your Tools ...
- Understanding the Handrail Grooves and Lattice Strip ...
- Building the Rail Section ...
- Installing the New Rail Section to the Deck Post ...
How to install stair spindles?
Stair spindles, also known as balusters, fill in the space between the handrail and the floor to prevent people from falling through. These need to be strong and secure. I began the installation of the spindles on horizontal section of the staircase first before moving on to installing the stair spindles on angles.
How do I add spindles to my bike handlebars?
I simply dropped each spindle into its bottom hole, held it up against the top handrail, and made sure to add about an inch to the top. A note on slight variations…
Can I install trailer axle spindles myself?
By no means are we trying to discourage you from attempting a do-it-yourself installation of trailer axle spindles, but unless you're a skilled welder, this may be one of those jobs that are better left to the professionals. It's critical that spindles are properly aligned and secured to the axle.
What is the best way to cut wrought iron spindles?
Whatever cutting tool you decide to use on the wrought iron spindles, make sure you are wearing safety glasses. Long sleeves and pants are also recommended. Picture all of the saw dust that flies around when you use a saw.
What happens if you cut a spindle too short?
Why are hollow spindles less expensive?
What to wear when cutting wrought iron?
Can you use Java gel stain on newel posts?
Can baluster shoes be used on spindles?
Can you cut a spindle too short?
Where does Lady DIY live?
See 2 more
How do you secure spindles?
Simply apply PVA glue into the split, squeeze the wood together, and then wipe over the surface with a damp rag. Then to help the glue set, bind your spindle together with waxed string or self-adhesive tape. Once dry, remove the string/tape and voila your spindle will be as good as new!
How do you attach rail spindles?
Add a screw to every spindle. Staple or screw the new section to the top handrail. Staples alone are sufficient here. Be sure to use short staples or drive them in at an angle so they won't poke through the top of the handrail.
How do you attach wood spindles to railing?
1:001:51Square Top Balusters on Open Tread Stair Installation - YouTubeYouTubeStart of suggested clipEnd of suggested clipPlace a small amount of wood glue into the holes. Place the balusters pin in the hole. And swing theMorePlace a small amount of wood glue into the holes. Place the balusters pin in the hole. And swing the balusters top into position in the hand rail plow.
How do you glue stair spindles?
Apply wood glue to each hole and to the surface of the dowel. Line up the jagged edges of the spindle, push the dowel into one end and squeeze the other spindle piece on. Clamp the pieces together and wipe off any squeezed-out glue with a damp rag.
What is the difference between balusters and spindles?
A baluster and spindle is actually almost the same thing, but the word spindle is more commonly used because it is easier to remember and say. Balusters usually rest on a footing; this could be a step, floor or deck, whereas, spindles are supported by a horizontal rail at the bottom that is attached to the posts.
How do you attach balusters?
5:427:15How To Install Iron Balusters - YouTubeYouTubeStart of suggested clipEnd of suggested clipPercent beginning first with the bottom trim. And then inside your handrail. It is helpful to add aMorePercent beginning first with the bottom trim. And then inside your handrail. It is helpful to add a small dab of epoxy. On top of the baluster as well then slide the baluster. Into the handrail.
How do you fit a spindle on a banister?
0:265:34Stair Baluster Installation with Wooden Spindles - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis spindle installation uses shoe rail on the bottom of the spindles. And a handrail with aMoreThis spindle installation uses shoe rail on the bottom of the spindles. And a handrail with a channel underneath. The spindles are spaced apart with Filat strips that fill the gap in the shoe rail.
How do you pin stair spindles?
Apply a little adhesive to the ends of the spindle and fix with a pin into the handrail groove. The head of the pin should be placed so that it will be covered by the fillet. Repeat until all spindles and fillets have been secured in place.
Do spindles go on inside or outside?
You can choose to install them either inside or outside the rim joists, but most code requirements have them installed inside. Some very small decks will use uncut posts that extend above the rim joists and around the perimeter as the rail posts.
Is it easy to replace staircase spindles?
Changing your stair balustrade (handrails, base rails, spindles and newel posts) doesn't always need to be difficult; it can be undertaken as a DIY project if you are used to working with wood. Certain systems are easier to fit as a stair DIY project than others depending on the way the pieces are held together.
Can you glue stair railing?
Ordinary wood glue won't hold up for stair rail repair. You need to use water-based epoxy that dries into a hard, glassy substance that takes on the original appearance of the wood.
How do you replace wooden stair spindles?
How to Replace Stair BalustersStep 1: remove existing balusters. Saw out your existing balusters. ... Step 2: drill holes for new balusters. ... Step 3: sand. ... step 4: measure. ... Step 5: paint. ... Step 6: cut the balusters. ... Step 7: install the new balusters.
How do you install deck railing balusters?
2:256:09How-to Install: Round Balusters for Deck Railings | Nuvo Iron - YouTubeYouTubeStart of suggested clipEnd of suggested clipTogether measure the section and divide it in half to find the center point of the railing. And markMoreTogether measure the section and divide it in half to find the center point of the railing. And mark this spot next we'll install the smdra baluster connectors for most sections.
How do you fix a loose railing spindle?
Shim the Loose SpindleDry-fit a wooden shim to ensure it fits snugly into the gap between the top of your loose spindle and the handrail.Spread wood glue lightly over the shim.Insert the shim into the gap at the top of your loose spindle and gently tap it with a hammer to set it firmly into place.More items...
How do you change a banister spindle?
How to Replace Stair BalustersStep 1: remove existing balusters. Saw out your existing balusters. ... Step 2: drill holes for new balusters. ... Step 3: sand. ... step 4: measure. ... Step 5: paint. ... Step 6: cut the balusters. ... Step 7: install the new balusters.
How do you remove and replace stair spindles?
1:102:20Your Life: Removing outdated spindles from your staircaseYouTubeStart of suggested clipEnd of suggested clipAnd you're going to bore out a hole inside the bottom of the spindle. And replace the dowel so itMoreAnd you're going to bore out a hole inside the bottom of the spindle. And replace the dowel so it comes inside the dowel or inside the bottom of the spindle. And back into the stair.
How to Install Iron Balusters: Part 1 - Wood Stairs
Here are the 3 methods of how to install iron balusters into a wood handrail, described in detail for the do-it-yourselfer or the semi-professional. Learn how to install in iron balusters, aka metal spindles, into wood handrail; For new construction or existing home.
How to Install Iron Balusters - StairSupplies™
Iron www.stairsupplies.com alu STAIRSUPPLIES Beautiful stair creations 1 866 226 6536 ter
What happens if you cut a spindle too short?
If you cut the new spindle too short, there isn’t enough of the spindle to stick up into the top hole. If you’re using decorative spindles (or really anything other than straight spindles), how far the spindle sinks into the bottom hole makes a difference. I measured and cut 2-3 spindles at a time.
Why are hollow spindles less expensive?
Shipping is another factor to consider: unless a website offers free shipping, hollow spindles are less expensive because they weigh less. I went with hollow spindles. When you’re ready to order your spindles, I recommend that you order at least 1-2 extra spindles of each type that you need.
What to wear when cutting wrought iron?
Whatever cutting tool you decide to use on the wrought iron spindles, make sure you are wearing safety glasses. Long sleeves and pants are also recommended. Picture all of the saw dust that flies around when you use a saw.
Can you use Java gel stain on newel posts?
With the old spindles gone, this was the perfect time to refinish the handrails and newel posts with that beautiful Java Gel Stain. I wasn’t thrilled about not having spindles for a week (Hello Safety Hazard!), but it was SOOOO much easier to apply the gel stain and NOT have to work around 72 spindles.
Can baluster shoes be used on spindles?
Now that I had all of the new spindles measured and cut, I was on the home stretch! I was using baluster shoes on the bottom of the new spindles, so I slid those on prior to gluing. Baluster shoes are optional and can be installed on the bottom and/or the top of your spindles. They cover up the hole and any glue, and give a cleaner, more finished look.
Can you cut a spindle too short?
I found that there were slight variations in the length needed for each spindle, mostly due to inconsistent depths on those bottom holes. If you cut the new spindle too short, there isn’t enough of the spindle to stick up into the top hole. If you’re using decorative spindles (or really anything other than straight spindles), how far the spindle sinks into the bottom hole makes a difference.
Where does Lady DIY live?
The Lady DIY lives in Northern California with her husband, three boys and her mom. When she’s not too busy with DIY projects around the house, she enjoys gardening, fitness and living the glamorous life of a baseball/soccer/football/Tae Kwon Do mom.
Why do you need to replace spindles on a trailer?
For instance, you might have to replace the spindles if your wheel bearings failed, or if your trailer was involved in an accident where the spindles were bent or cracked.
Why do you need grease caps on a boat trailer?
As you can imagine, lubrication around the spindle is critical to keep the bearings spinning and to prevent the hub from making contact with the spindle's surface. Grease caps normally do a fine job of keeping grease in place in typical towing conditions. However, on a trailer that's towed through sand or a regularly submerged boat trailer, for example, the grease -- even with properly installed grease caps -- can become contaminated or even washed away completely. That's why you must frequently inspect your spindles for signs of wear.
Can you pull a trailer down the road without a spindle?
After all, you simply can't pull a trailer down the road without spindles -- not very far, anyway. There are very few bolt-on spindles available; in fact, most spindles are welded to the axle tube. Replacing a spindle requires breaking the existing weld and then welding the new spindle in place.
Can grease be washed off a boat trailer?
However, on a trailer that's towed through sand or a regularly submerged boat trailer, for example, the grease -- even with properly installed grease caps -- can become contaminated or even washed away completely. That's why you must frequently inspect your spindles for signs of wear.
Can a trailer repair facility install a spindle?
A licensed trailer repair facility should easily be able to install a new spindle or two. Remember, sometimes it may be worth the extra cost to save the time and frustration that can sometimes accompany a difficult (and unfamiliar) repair.
Can you put spindles in a garage?
Since welding axle components together probably falls outside of the comfort range of a lot of weekend mechanics, the installation of spindles in the typical homeowner's garage or driveway isn't very likely -- but it is possible.
What happens if you cut a spindle too short?
If you cut the new spindle too short, there isn’t enough of the spindle to stick up into the top hole. If you’re using decorative spindles (or really anything other than straight spindles), how far the spindle sinks into the bottom hole makes a difference. I measured and cut 2-3 spindles at a time.
Why are hollow spindles less expensive?
Shipping is another factor to consider: unless a website offers free shipping, hollow spindles are less expensive because they weigh less. I went with hollow spindles. When you’re ready to order your spindles, I recommend that you order at least 1-2 extra spindles of each type that you need.
What to wear when cutting wrought iron?
Whatever cutting tool you decide to use on the wrought iron spindles, make sure you are wearing safety glasses. Long sleeves and pants are also recommended. Picture all of the saw dust that flies around when you use a saw.
Can you use Java gel stain on newel posts?
With the old spindles gone, this was the perfect time to refinish the handrails and newel posts with that beautiful Java Gel Stain. I wasn’t thrilled about not having spindles for a week (Hello Safety Hazard!), but it was SOOOO much easier to apply the gel stain and NOT have to work around 72 spindles.
Can baluster shoes be used on spindles?
Now that I had all of the new spindles measured and cut, I was on the home stretch! I was using baluster shoes on the bottom of the new spindles, so I slid those on prior to gluing. Baluster shoes are optional and can be installed on the bottom and/or the top of your spindles. They cover up the hole and any glue, and give a cleaner, more finished look.
Can you cut a spindle too short?
I found that there were slight variations in the length needed for each spindle, mostly due to inconsistent depths on those bottom holes. If you cut the new spindle too short, there isn’t enough of the spindle to stick up into the top hole. If you’re using decorative spindles (or really anything other than straight spindles), how far the spindle sinks into the bottom hole makes a difference.
Where does Lady DIY live?
The Lady DIY lives in Northern California with her husband, three boys and her mom. When she’s not too busy with DIY projects around the house, she enjoys gardening, fitness and living the glamorous life of a baseball/soccer/football/Tae Kwon Do mom.