- Start connecting the shells and glass with the wire using the jeweller's needle nose pliers.
- Twist and turn the wire, soldering to the foil as you go.
- When you've finished make sure that the connections are strong enough to support the stained glass and shells.
How to connect shells to glass?
What do you need to make a stained glass shell?
How to cool a solder circle?
What can Gail use as a hanger?
What side of solder bead covers little end nubs?
How to burnish copper foil on glass beads?
How to darken solder?
See 2 more
How do you attach patterns to stained glass?
GLUING YOUR PATTERN ONTO GLASSUse an old school glue stick.Place your tracing paper piece in the desired position.Place a layer of glue on the glass, next place your paper piece on the glass, and finally run your glue stick over your piece one more time.
What is the best wire to use in stained glass?
14-18 gauge is the range for most stained glass projects. #14 gauge is good for hanging and #18 for more decorative stained glass work. There's always room for pushing the boundaries – if you want to do something very delicate like cat's whiskers you could go even thinner – say #22.
How do you hang a hanging ring on stained glass?
0:582:08How to Attach Rings to a Stained Glass Panel - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd hold them just on the bottom edge of your iron. And then lay that right in so it touches the topMoreAnd hold them just on the bottom edge of your iron. And then lay that right in so it touches the top of the ring in the side of the panel.
How do you attach copper foil to stained glass?
10:5712:23How to Connect Stained Glass using Copper Foil - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then you want to use your flux and just lightly brush the copper foil. With it and that's goingMoreAnd then you want to use your flux and just lightly brush the copper foil. With it and that's going to allow the solder to stick to the copper foil better.
What kind of wire Can you solder for stained glass?
2. Solder will not stick to glass alone, so each piece of glass must be wrapped in copper foil. 3. Solder needs a flux to flow smoothly and bond to other metals (i.e., copper foil or lead came).
Can you use electrical solder on stained glass?
Solder will not stick to glass alone, therefore each piece of glass must be wrapped in copper foil or lead came. Copper foil is a technique, made popular by L.C.
How do you hang things on a glass window?
Command™ Clear Window Hooks are perfect for hanging suncatchers, decorations, and signs directly on window glass. Command™ Clear Window Hooks are fast and easy to hang. Strips stick to many surfaces, including glass, paint, wood, tile and more. Yet, removes leaving no holes, marks, or sticky residue.
What kind of jump rings do you use for stained glass?
Hanging Rings (3/16") for Stained Glass Projects are perfectly formed 3/16" jump rings ready to solder into your suncatchers, panels & more.
How do you hang stained glass suncatchers?
If you're going to have a stained glass suncatcher in a window, your best bet is screw a hook or other hanging tool into the frame at the top of the window. You can also screw a hook, hidden under curtain hardware or a valance, and loop the suncatcher string over the screw.
What is the best solder for copper foil stained glass?
60/40 solder60/40 solder (paid link) is better for soldering copper foil as it runs well, so it could be that you're using 50/50 which makes a smooth line a little more tricky – although certainly not impossible.
What size copper foil should I use for stained glass?
Stained Glass Copper Foil Width If you aim for the copper foil overlap on the glass to be between 1/32” and 1/16” you'll be spot on. 3/16” – 1/4” foil works well for most standard copper foil stained glass pieces.
What do you need for soldering stained glass?
Things You'll NeedPieces of stained glass.Glass cutter.Scissors.Copper foil.Liquid flux.Coil of non-lead solder.Soldering iron.Metal Soldering Iron stand.
What is tinned copper wire used for in stained glass?
Tinned copper wire is used in the production of stain glass ornaments. The wire is resilient enough to both hold and hang your copper foiled designs, and needs only to be soldered on.
What kind of solder do you use for copper foil?
60/40 solder (paid link) is better for soldering copper foil as it runs well, so it could be that you're using 50/50 which makes a smooth line a little more tricky – although certainly not impossible.
Can you use copper solder for stained glass?
Soldering copper foil for stained glass takes time and practice. Once you get the hang of it, you will have the process down in no time!
What is pre tinned wire?
Description. The tin layer on tinned wire protects the copper core from oxidizing and accepts solder with minimal cleaning. Silver colored and will accept patina. Use as reinforcement in suncatchers, to make jump rings and for applying quick and easy decoration to your soldering.
How to tin copper wire for stained glass?
Tinning Copper Wire Instructions. Now for tinning copper wire for stained glass! Coat the wire with flux using a sponge because it covers the wire nicely. The flux gives it an additional clean and allows it to take the solder. Make sure that you cover all of the wire.
Why do we use tin wire for stained glass?
The reason we tin wire for stained glass is so that it will take the patina and you can match it to the patina in your project. You can always choose the easy route and buy tinned wire you can find an impressive range of wire here (affiliate). It’s nice to make things simple for ourselves sometimes.
How to solder stained glass?
How to Solder Stained Glass Stained glass soldering joins all your foil-wrapped pieces of glass together by running a bead of solder along each seam. It isn’t the easiest technique to learn but it’s one of the most exciting, as it allows you pick up and see your project for … Continue reading
How to straighten copper wire?
Once you’ve rescued your copper wire you need to straighten it. Get a pair of pliers and a very thick cloth or towel. Grasp the wire tightly through the towel and pull the kinked wire 2 or 3 times through. This straightens out all the kinks in it.
What is pre-tinned wire?
Pre-tinned wire is wire covered with a coating of solder. You can make it cheaply by buying copper wire or even cheaper by recycling electrical wire.
How to remove plastic coating from a knife?
The trick is to leave the knife in the same position and pull the wire towards you. Put the knife nearly on the workbench, hold it steady and pull the wire slowly towards you. This removes the plastic coating. Do it in stages.
How to connect shells to glass?
Start connecting the shells and glass with the wire using the jeweller’s needle nose pliers
What do you need to make a stained glass shell?
You need: drapery glass (you can use any stained glass but this glass goes particularly well with the shells), shells, thin wire, gridded paper, mosaic glass cutter or glass saw (if using drapery stained glass), needle nose pliers, KwikClean, wax
How to cool a solder circle?
Add a small blob of solder to the circle and wait for it to cool
What can Gail use as a hanger?
You can also use copper wire bent in small inverted V shaped hooks to solder on smaller items to use as hangers.
What side of solder bead covers little end nubs?
The solder bead on the back side will cover the little end nubs
How to burnish copper foil on glass beads?
I wanted to pass on a little trick I learned when burnishing copper foil on the glass beads or shells…after wrapping them in foil, put them in a glass or jar and spin it around in a circular motion. They come out perfectly burnished.
How to darken solder?
Use KwikClean flux cleaner and lightly scrub with a soft brush. Your wire and solder will naturally darken in time
