To do that, heat the tines of the fork and bend the center two outward like petals. Fold the outer two tines inward, into an "X" shape. Then curl the top of the far right and left tines back toward the center, and then the other two tines back over to create the hearts.
How do you bend silverware to make jewelry?
To do that, heat the tines of the fork and bend the center two outward like petals. Fold the outer two tines inward, into an "X" shape. Then curl the top of the far right and left tines back toward the center, and then the other two tines back over to create the hearts. Bending silverware to make jewelry leaves divots, or marks.
How do I make Fork jewelry?
Bending the tines of a fork result in complex-looking silver jewelry. To create a piece of fork jewelry, plan the curls in advance. Using jewelry pliers and a strong wrist, twist all of the tines in the same direction to create a simple, flowery effect.
How do you bend a fork like a flower?
To do that, heat the tines of the fork and bend the center two outward like petals. Fold the outer two tines inward, into an "X" shape.
How do you make a heart out of a fork?
To do that, heat the tines of the fork and bend the center two outward like petals. Fold the outer two tines inward, into an "X" shape. Then curl the top of the far right and left tines back toward the center, and then the other two tines back over to create the hearts.
How do you bend a fork at home?
0:444:24How to perform the fork bend trick - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you hold it just at the balance. Point right in the center. But you've got kind of like a looseMoreSo you hold it just at the balance. Point right in the center. But you've got kind of like a loose grip on that. So it's able to wobble. Around. But you don't turn your hand sideways.
How do you bend sterling silver forks?
Flatten your silver spoons or forks with a ball peen hammer, heat the utensil in boiling water, then bend it around a curved object. So long as the silver is thin enough, you can then drill the silver to a small plank (or use glue instead).
How do you cut and bend silverware for jewelry?
1:264:10How to Cut Silverware with a Dremel - YouTubeYouTubeStart of suggested clipEnd of suggested clipFor safety purposes once you think it's tight enough by hand take the wrench that comes with it andMoreFor safety purposes once you think it's tight enough by hand take the wrench that comes with it and tighten it even more. These Dremel x' work at very high speeds.
How do you bend fork tines in crafts?
How to make a fork hookFind an old fork. ... Flatten it with a heavy hammer and a steel block. ... Hammer down on the raised part, flip, repeat.Using a pretty heavy-duty needle nose pliers, curl the right tine forward, bit by bit.It's pretty hard to bend, don't hurt your wrists!More items...
How do you make fork jewelry?
1:454:46How to Make a Fork Bracelet - YouTubeYouTubeStart of suggested clipEnd of suggested clipDown onto the end of the fork. And you need to wrap the corduroy. Around that part of the fork. AndMoreDown onto the end of the fork. And you need to wrap the corduroy. Around that part of the fork. And you just kind of bend it. As you go like this okay and you see how this is round.
How do you bend metal utensils?
0:130:59How to Easily Bend Forks and Spoons - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I've used too quick grip clamps I've tightened them down as much as I can on this wooden dowelMoreSo I've used too quick grip clamps I've tightened them down as much as I can on this wooden dowel that was just in this mess of my garage sitting around I've put the fork right here.
How do you make jewelry out of silver forks?
0:062:05How to Make Jewelry From Silverware - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd the materials that you will need are a couple old pieces of silverware a hacksaw with a metalMoreAnd the materials that you will need are a couple old pieces of silverware a hacksaw with a metal blade. Some 18 gauge wire some the right tools you've got your rosary tools and your flathead.
Can you make jewelry out of stainless steel silverware?
It's really simple to make some fairly nifty jewelry out of what you've already got sitting around. For this bracelet I chose a stainless fork with some long tines and a bit of character, and then gave it a bit more. I like stainless steel because it's durable and polishes well.
How do you bend a silver spoon into a ring?
0:5913:58DIY Spoon Ring (Tools from Home) vs. (Pro Tools) - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut they have teeth on them and so it like leave marks on your rings wow so strong so i just tookMoreBut they have teeth on them and so it like leave marks on your rings wow so strong so i just took some cloth and balled it up rolled it up and we're gonna put on top of the pliers.
How do you bend a metal fork?
0:552:34Magic Trick: How to Bend a Fork With Your Mind - YouTubeYouTubeStart of suggested clipEnd of suggested clipYeah hold that hold it go ahead with two hands try to put it back with two hands it's not so hard toMoreYeah hold that hold it go ahead with two hands try to put it back with two hands it's not so hard to put it back right good.
How do you bend silverware on a bracelet?
4:219:58Making silverware bracelet - YouTubeYouTubeStart of suggested clipEnd of suggested clipOkay here we go. You're gonna take your spoon. You're going to get in the form make a bend okay andMoreOkay here we go. You're gonna take your spoon. You're going to get in the form make a bend okay and you're just going to keep feeding it in there and make little small bends it'll kind of feed itself
How do you bend a metal fork?
0:552:34Magic Trick: How to Bend a Fork With Your Mind - YouTubeYouTubeStart of suggested clipEnd of suggested clipYeah hold that hold it go ahead with two hands try to put it back with two hands it's not so hard toMoreYeah hold that hold it go ahead with two hands try to put it back with two hands it's not so hard to put it back right good.
How do you bend stainless steel flatware?
2:506:04AMAZING SPOON BRACELET BENDER by Flatwearable Artisan ...YouTubeStart of suggested clipEnd of suggested clipSo it's off-center a little bit you're going to tighten that down now you're going to tighten theseMoreSo it's off-center a little bit you're going to tighten that down now you're going to tighten these rollers. Down you want them snug up against your piece.
How do you bend metal jewelry?
1:456:27How to Bend Wire for Jewelry Making DIY Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you just hold the wire like that and then what I'd like to do is just kind of bend it like holdMoreSo you just hold the wire like that and then what I'd like to do is just kind of bend it like hold my hand fixed here and then just push this with that side so you're holding with the pliers.
How do you make silverware jewelry with a Dremel tool?
0:333:30How to Smooth and Texture Silverware with a Dremel - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo go ahead and pick your grinding stone slip it inside tighten it up oops. Tighten it up and justMoreSo go ahead and pick your grinding stone slip it inside tighten it up oops. Tighten it up and just when you think it's tight enough give it another tug let go your silver. Bit.
How to make silver jewelry with forks?
Bending the tines of a fork result in complex-looking silver jewelry. To create a piece of fork jewelry, plan the curls in advance. Using jewelry pliers and a strong wrist, twist all of the tines in the same direction to create a simple, flowery effect.
How to make jewelry out of sterling silver?
For some jewelry designs, you may need to use a propane torch, which requires you to wear safety goggles and gloves. Advertisement.
How to make a ring with a spoon handle?
Tap the silverware against the mandrel with a rawhide mallet or bossing hammer. Reposition the silverware several times to tap it from different angles to create an appropriate curve. To create a ring, hammer the spoon handle against a ring mandrel while holding it against a workbench or wooden block.
How to make silverware bracelets?
Silverware bracelets and rings are created by hammering the flatware against a mandrel -- a cylindrical work surface — and using pliers to bend the piece into shape. Depending on the weight of the silverware, heating with a propane torch may be necessary.
How to make a ring out of a spoon?
To create a ring, hammer the spoon handle against a ring mandrel while holding it against a workbench or wooden block. Work down the mandrel to a section larger than the intended size, which makes the resulting piece rounder. Once the part of spoon you're working with is curved as desired, cut off the excess and file down the rough edges.
How to heat silverware?
If the silverware is heavy enough to require heating, use a propane torch to bend it. While you'll need to apply heat throughout the process, you want to do it in quick applications at first. Wear safety gloves and goggles.
What is the best forge for bracelets?
Full-size forks and spoons can be great to forge bracelets. Baby spoons and silverware handles work well for rings. Thicker silverware is harder to bend but creates finished pieces with higher-perceived quality.
What is recycling spoons and forks?
Recycling spoons and forks for jewelry is a long standing craft dating back centuries. It made sense as traditional silverware is made from real silver.
Can you make jump rings with two forks?
A couple of the following tutorials give better instructions. Instead of welding the two forks together, either make holes for jump rings or bend the stem end over to house a jump ring.
Do you waste the stems on spoon pendants?
If you made the spoon pendants then don't waste the stems or handles! Tammy Jones, the editor of Jewelry Making Daily has a Spoon Link Necklace tutorial which illustrates how to saw, prepare and finish the handles.
Step 4
Here's a bunch that have been bent, and some that have been cut to length. I like to make my bracelet sections 2 3/4" long.
Step 7
I drill out one hole on each end of the piece. 1/16" drill bit works for me. I use a drill press vice to hold the piece in place while it's being drilled.
Step 8
I use my dremel tool to clean and dress the drilled holes. This makes everything smooth.
Step 9
I buff and polish the sections with my full size bench grinder that have buffing/polishing wheels attached, or I also use a dremel flex shaft with the felt buffing wheels. That's nice to get into the designs and gets the backside really well.
Step 10
The piece on the left is before polishing, the piece on the right is polished and ready for the next step.
Step 12
I get all my findings together and ready to assemble. I hand wire the beads that are going to be used as the focal point of the bracelet.
Step 13
I flux and solder each jump ring for added security. I use a "third hand" to hold the piece for soldering.