Knowledge Builders

how do you bend wire on a coat hanger

by Ibrahim Anderson Published 6 months ago Updated 3 months ago
image

Method 1 Making 90 degree bends

  1. Making 90 degree bends. The easiest method is to use square pliers with sufficiently wide jaws.
  2. Start by marking down where you want the bend, taking into account a small error as making a corner-like sharp bend into a piece of wire is not easy.
  3. Secure the wire, preferably by the larger part of the wire.

More items...

  1. Cut the wrapped wire and hook off the hanger with wire cutters. This will leave a triangular shape to work with.
  2. Bend the center of the large, bottom section upward to form a diamond shape with the hanger. ...
  3. Curve the top two sides with pliers. ...
  4. Push the side corners together to overlap the ends of the curves.

Full Answer

How do you cut a wire coat hanger?

Pliers or wire cutters can be used to cut a coat hanger. Often, crafts that involve a wire coat hanger require you to cut the hanger to complete the craft. While you can possibly bend and twist the coat hanger repeatedly until it breaks, you can also make quick work of the task and cut the wire.

How do you bend clothes hangers for crafts?

With small hand tools, you can creatively bend clothes hangers into different shapes to use as a guideline for larger crafts. Cut the wrapped wire and hook off the hanger with wire cutters. This will leave a triangular shape to work with. Bend the center of the large, bottom section upward to form a diamond shape with the hanger.

How do you bend a hanger to make a diamond?

Bend the center of the large, bottom section upward to form a diamond shape with the hanger. Use pliers to grip and bend the hanger. Curve the top two sides with pliers.

How do you bend wire?

+ Show 5 more... This wikiHow will teach you several methods on how to bend wire, all with different goals and outcomes. Make sure you have the right tools. The simplest method of bending wire is by hand. For more precise and comfortable bending, use pliers.

See 7 key topics from this page & related content

image

How do you bend a metal coat hanger?

5:446:42How to Bend a Coat Hanger - YouTubeYouTubeStart of suggested clipEnd of suggested clipAlways bend from the left end of the tube. Bending. Each Bend in succession to bend any degree ofMoreAlways bend from the left end of the tube. Bending. Each Bend in succession to bend any degree of bend. Line the zero mark on the bender radius block up with the mark which was placed on the tube.

How do you bend a circle in a hanger?

0:412:46DIY Wire Circles: Tip Tuesday - YouTubeYouTubeStart of suggested clipEnd of suggested clipBend. It at a right angle. And then take your pill bottle hold it with one thumb. And then just windMoreBend. It at a right angle. And then take your pill bottle hold it with one thumb. And then just wind it around the edge like that and then you want to just make sure it's nicely positioned.

How do you twist a coat hanger?

3:207:075 Wire Hanger Life Hacks - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhat it's coming in and just push it to all the way around. And here's the other side of the hole. IMoreWhat it's coming in and just push it to all the way around. And here's the other side of the hole. I'm gonna pull this out of course we're going to unbend it boom.

How do you cut wire on a coat hanger?

0:231:22Cut With Pliers (clothes hangers for mounting casts) - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you can use is the internal part of the pliers right there as not just for cutting wire hangersMoreSo you can use is the internal part of the pliers right there as not just for cutting wire hangers but cutting.

What is the shape of hanger?

The first is the wire hanger, which has a simple loop of wire, most often steel, in a flattened triangle shape that continues into a hook at the top.

What's the coat hanger reflex?

The hanger reflex is a human reflex. When the head is circled with a tight-fitting and stretched clothes hanger, the hanger compresses the frontotemporal region and the head involuntarily rotates toward the direction of the hook.

What can I use instead of wire cutters?

It's possible to use a hacksaw to cut wire if no cutter is available. You'll want to use a blade with a high teeth-per-inch (TPI) count for as clean a cut as possible. Regardless of the TPI count, using a hacksaw to cut wire is difficult unless the wire has a large diameter.

What can I use to cut a coat hanger?

Pliers or wire cutters can be used to cut a coat hanger. Often, crafts that involve a wire coat hanger require you to cut the hanger to complete the craft. While you can possibly bend and twist the coat hanger repeatedly until it breaks, you can also make quick work of the task and cut the wire.

How do you cut a wire hanger without pliers?

0:041:53How to cut wire without pliers - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I'm going to show you how to cut wire without using any employers it's pretty simple this is aMoreSo I'm going to show you how to cut wire without using any employers it's pretty simple this is a big bar here it's even hard to cut using my bolt cutters. But if you take it. And you bend it around.

How do you bend round?

5:136:30How to Bend Big Bar Stock by Hand - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I just have to tighten this up a little bit. And watch it just it. I guess whack it so that'llMoreSo I just have to tighten this up a little bit. And watch it just it. I guess whack it so that'll straighten out a bit and there you go so that's one inch round.

How do you bend sheet metal into a circle?

0:154:48Making a Radius Bending Fixture for Sheetmetal - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe pivot blocks are a simple fabrication which bolt to the edge of my bench with holes and engageMoreThe pivot blocks are a simple fabrication which bolt to the edge of my bench with holes and engage pins on the end of the aprons to make a radius bend a piece of round stock is used as the die.

How do you bend a round steel bar?

0:212:14How to bend flat steel bar - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you've got much thicker than this you're gonna have to eat it off before you actually bend itMoreIf you've got much thicker than this you're gonna have to eat it off before you actually bend it what we're going to call Bend this and put a 90 degree Bend on it. So I'm going to use the square. I'm

How do you bend a metal rod?

2:444:23HOW TO BEND METAL RODS USING HEAT - YouTubeYouTubeStart of suggested clipEnd of suggested clipQuickly is to get the tip of that flame. On your bend. Point. In real time it's been about 10MoreQuickly is to get the tip of that flame. On your bend. Point. In real time it's been about 10 minutes and i'm looking for i want this to be red hot like a chili pepper.

What to do with a wire hanger?

My favorite thing to do with a wire hanger is to pull it out to make a big (kind of) oval, stretch an old, clean knee high stocking over it, tape it around the handle part and then let the kids play indoor 'tennis' with a balloon. Works great and keeps them quiet for a long while. Just make sure and move your lamps out of the way ... Learned that one the hard way.

How to make a circle out of a hanger?

Shape the hanger into a circle. Bend the hook closed for a handle. Place masking tape on the handle end, as shown, to better complete the circle.

How to make a wire fish?

You can see a full demo in step 4 here.#N#Start by taking a coat hanger and cutting out the long bottom section. Bend it about 1/3rd of the way down over a the shaft of a screwdriver. Bend the longer end at 90 degrees. With the short end against the shaft, wrap the long end around both. See the pictures. Cut it to length so that 5 coils are left. File any sharp edges.#N#It must be bent in two areas for it to work. The first is where the coil was cut. Use pliers to reduce the diameter of the last coil. This helps hold the paracord in place and prevents the wire end from catching onto your gear when your pulling the tie tight.#N#The other important bend is at the head of the fish. The upper most coil must be bent toward the top. This gives the back of the head a hook shape for the paracord to tie around. See the pictures.#N#The tail is bent to complete the fish look. It also gives another place to tie off.

What is the bend on a paracord tie?

This helps hold the paracord in place and prevents the wire end from catching onto your gear when your pulling the tie tight. The other important bend is at the head of the fish. The upper most coil must be bent toward the top. This gives the back of the head a hook shape for the paracord to tie around.

How to make a key ring with a bit?

Make a custom key ring with a socket bit. Choose your size socket and wrap the wire around as shown. The wire tends to spring back with larger loops so you may end up using a smaller socket to get the right size.

How to make a card out of magnets?

Place two magnets on your fridge. Take a section of wire and make the ends as fancy as you want; spirals, circles, stars, mud flap girl, and so on. Place the wire against the magnets. Hang your card.

How to keep a belt from dangling?

Keep the loose end of your belt from dangling. Form a piece of wire into a rectangle. Make it so that there is a little friction when the top belt is threaded through. Paint it your favorite color to match.

How to cut a coat hanger?

Apply pressure to the handle grips of the tool with your fingers and hand to cut . Keep a tight, steady grip on the handle grips as you cut the coat hanger.

What to wear when flying wire?

Put on a pair of safety glasses to protect your eyes from possible flying wire. Safety goggles or a face shield are also appropriate.

How to keep wire cutters in good working order?

Oil the hinges of wire cutters or pliers periodically to keep them in good working order.

Can you cut a wire coat hanger?

While you can possibly bend and twist the coat hanger repeatedly until it breaks, you can also make quick work of the task and cut the wire. Don't just pull a pair of scissors out of a drawer and expect them to cut through the wire. You will need to make use of a tool that's better suited for the task.

How to remove hanger from coffee can?

Remove the hanger from the coffee can and twist the hanger ends together using pliers.

What can you do with metal hangers?

Metal clothes hangers are not only a functional clothing organization tool, but they are a strong crafting material that is extremely easy to work with. You can shape a hanger into a circle to use as a crafted basketball hoop, wall decor, or a dream catcher.

How to make a triangular shape on a hanger?

Cut the wrapped wire and hook off the hanger with wire cutters. This will leave a triangular shape to work with.

How to make a heart shape?

Curve the top two sides with pliers. Carefully pull up on the center of each side and push down on the open end to create the curves of the heart.

Can you make a hanger into a heart shape?

You can shape a hanger into a heart shape to create an elaborate Valentine gift, or a heart-shaped wall piece. With small hand tools, you can creatively bend clothes hangers into different shapes to use as a guideline for larger crafts.

How to make a hanging planter?

Make an inexpensive outdoor hanging planter with a colander and a wire hanger. Untwist the top of the hanger and slip one end through the handles of the colander. Re-twist the ends and pop a plant inside. Not only does this combo make for a one-of-a-kind display, but the colander provides great drainage for the plant—it's a win-win!

How to stop caulk from oozing out of a tube?

Prevent caulk from oozing uncontrollably out of the tube by snipping a piece of wire hanger and sticking it into the opening to form a stopper. Bend the opposite end into a circle to create a handle that makes it even easier to pick up your project where you left off.

How to make a wreath for a door?

Spruce up your facade with a wreath fashioned from a hanger. Start by bending the hanger into a circle, and then tie ribbons, clip clothespins, or attach floral wire and greenery around the edges. If you’re feeling extra crafty, clip the top of the circle and string pinecones, ornaments, or other decorative items onto the wire before twisting the ends back together. Use the curved hook to display your creation proudly on your door.

Do wire hangers pile up?

Wire clothes hangers are inescapable. They seem to multiply overnight, and they pile up every time you go to the cleaners. Instead of throwing them out, try one of these clever ideas for repurposing this common closet necessity. By Faith Towers.

How to use a coat hanger for a toilet?

A coat hanger will act as a toilet snake which will enable you to reach into the drainpipe better than your hands would. To use the hanger , just unravel the hanger from its original shape to a long line and insert it into the toilet then flush. You can leave the hooked part of the toilet so it can attach to any clogs in ...

How Effective is the Wire Method?

The use of a wire coat is very similar to the use of a toilet snake because it entails a wire getting into the drain either to push or extract a clog in the pipes.

How to get rid of a clogged drain in a washing machine?

To make this method even better, you can use a washing detergent and hot water. Simply add the detergent into the bowl and let it sit for about 30 minutes. Follow the instructions above to step six then pour the hot water into the bowl. Flush to make sure the clog is resolved.

Can you use a wire coat hanger instead of wood?

Before we start, note that you can only use a wire coat hanger rather than plastic or wood because they can’t be unwound, nor will they be effective in the job.

Can you damage a drain with a wire coat hanger?

Be careful though, because you’re using a wire coat hanger, you may damage the drain if you use too much force. To help you with how to safely and effectively use the hanger, here’s a step-by-step guide you can follow to achieve your desired results. Contents show. Steps. Supplies Needed.

Can wires damage a toilet?

However, the use of the wire can damage the porcelain or ceramic material used to make the toilet, also it can damage the pipe in the drain.

Can you leave a hook on a toilet?

You can leave the hooked part of the toilet so it can attach to any clogs in the drain making it easier for you to retrieve it. This simple DIY unclogging technique is relatively cheap and can give you results in no time. Be careful though, because you’re using a wire coat hanger, you may damage the drain if you use too much force. ...

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9