For quilts with curved edges, you should make bias binding instead. Continuous binding can be machine-sewn to the front side of the quilt and hand-stitched to the back, but I prefer to attach it to the back side of the quilt with no hand sewing. The machine-binding method is much faster and easier for quilters like me who hate hand sewing.
What is the easiest way to bind a quilt?
What Is The Easiest Way To Bind A Quilt?
- First, put your quilt backing on a table or spread it out on the floor with the right side up. ...
- Second, lay your finished quilt top so that the right side lays on top of the backing.The quilt topper’s wrong side will be facing up.
- Third, pin the two fabric pieces together every 6 inches around on three sides.
How to finish a Quilt without using a binding?
How To Finish A Quilt Without Binding
- Preparing Your Materials. You will need your finished quilt to follow this process. ...
- Placing Your Fabric Backing. Cut your fabric backing to size so that it matches the shape and probably a few inches larger in size than your quilt.
- Placing Your Quilt. ...
- Stitching the Seam. ...
- Trimming the Seam. ...
- Turning and Finishing by Hand. ...
How do you prepare a quilt for binding?
- Length of binding = perimeter + 10”
- Width of binding before ironing = 2 ½” (You can do larger or smaller depending on your preference. Keep in mind that you will be ironing the strips in half. ...
- Strips to cut — Take your length of binding total and divide it by the width of your fabric. Most quilting cotton will be 40”- 44” wide. ...
How to quickly calculate quilt binding?
To find out how much backing or batting fabric you need, follow these few steps:
- Measure your quilt top. ...
- Determine the usable width of your bolt of fabric.
- Establish if your fabric is directional.
- We always add 4 inches of extra material to all sides of the quilt (that's 8" more in width and length). ...
- Do you want the result in yards and inches (imperial) or meters and centimeters (metric)? ...
How do you bind a curved surface on a quilt?
1:052:02Terry's Tips: How To Bind a Curve - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then all I need to do is wrap the binding around to the back and stitch it in place by hand orMoreAnd then all I need to do is wrap the binding around to the back and stitch it in place by hand or machine. I've used this technique on one of my snack shack had pads but you can use it on any curve.
How do you curve the edges of a quilt?
0:253:40Binding a Curved Edge Tip - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo for curved edge quilts we always have to cut bias strips because they're stretchy. And they canMoreSo for curved edge quilts we always have to cut bias strips because they're stretchy. And they can move around the curves. On the edge. So I cut my strips at two and a quarter inches.
How do you bind an irregular quilt edge?
8:1810:18Binding Irregular (non-90 degree) corners Part 1 - YouTubeYouTubeStart of suggested clipEnd of suggested clipAgain we're lining up in the machine right on the tape needle. Back down into the binding and theMoreAgain we're lining up in the machine right on the tape needle. Back down into the binding and the quilt. And now we're going to stitch about four or five stitches.
How do you sew a 45 degree angle binding?
2:164:34Binding an Odd Angle - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd i want to turn the corner. So i'm going to keep that folded right there on the miter. But i'mMoreAnd i want to turn the corner. So i'm going to keep that folded right there on the miter. But i'm going to line up my binding along my raw edge i'm going to do it right from the point there's noBinding an Odd Angle - YouTubehttps://www.youtube.com › watchhttps://www.youtube.com › watchSearch for: How do you sew a 45 degree angle binding?
How do you sew binding around corners?
0:555:21Easy Mitered Corners for Quilt Binding - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can approach the pin and then so at an angle 45 degrees just off the corner of the quilt. SoMoreYou can approach the pin and then so at an angle 45 degrees just off the corner of the quilt. So either one works here I've just sewn up to the pin.Easy Mitered Corners for Quilt Binding - YouTubehttps://www.youtube.com › watchhttps://www.youtube.com › watchSearch for: How do you sew binding around corners?
How do you sew a 45 degree corner?
2:124:04How to Sew Mitered Corners with Ashley Nickels I CreativebugYouTubeStart of suggested clipEnd of suggested clipTaking my ruler I'm going to line up my 45-degree. Line with that crease line which is actually theMoreTaking my ruler I'm going to line up my 45-degree. Line with that crease line which is actually the 1 inch line that you've already drawn. I'm going to line it up right at the edge.How to Sew Mitered Corners with Ashley Nickels I Creativebughttps://www.youtube.com › watchhttps://www.youtube.com › watchSearch for: How do you sew a 45 degree corner?
How do you round a quilt shape?
4:329:34The Cheerio Quilt - Quilting with Circles - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you line that up you lay your fabric on your die cut. Put your acrylic sheet over and then yourMoreSo you line that up you lay your fabric on your die cut. Put your acrylic sheet over and then your filler sheet. And then you just stick it through here. And you start rolling.
How do you sew round edges?
1:3816:40How to Sew Curves + Corners on a Sewing Machine | Beginner LessonYouTubeStart of suggested clipEnd of suggested clipMore but for this concave curve i just need to gently continue to move the fabric little by little.MoreMore but for this concave curve i just need to gently continue to move the fabric little by little. And here we are almost at the end. All right so i'm going to backstitch again hit that reverse.
How do you quilt around a shape?
0:5713:01How to do Outline Quilting on a Home Machine, Beginner ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I think I'm going to quilt around this flower shape in the center first. Then I'll stitch acrossMoreSo I think I'm going to quilt around this flower shape in the center first. Then I'll stitch across the light blue area to get to the outer heart shapes.
How do you bind a scalloped edge?
5:0715:05How to do Scalloped Binding - YouTubeYouTubeStart of suggested clipEnd of suggested clipRight under the presser foot and against the guide and I'm starting on the outermost point of aMoreRight under the presser foot and against the guide and I'm starting on the outermost point of a curve I'm gonna go ahead and lower my presser foot and bring my bobbin thread.
Making Scrap Quilts with Torn Bits and Strips
Heather Thomas talks about using torn bits and scraps of leftover fabric on smaller quilting projects to create fun, unique pieces. She shows several examples of her own work, including a project that she based off of her daughter’s scribbling and a few pieces that contain schlubs, or thread that gets left behind in the…
The Right Needles for Your Sewing Machine
Heather Thomas explains in depth the benefits and qualities of each sewing machine needle. These tips and techniques will help you choose the right sewing needle and what needles work well with different thread. Learn the many possibilities associated with specific needles and threads.
How to Use a Color Wheel For Quilting
Heather Thomas takes you through the different intensities of the color wheel. Find out how to identify colors by their intensity as well as what colors add power or tone. See examples of quilts and learn how to effectively mix color intensities for your own quilts. Use these tips to make unique and beautiful colored…
Choosing the Right Quilting Thread
Heather Thomas teaches you all about thread while providing helpful tips and techniques for working with thread. Learn the many types of thread available as well as the many brands and weights of thread. Understand the value of thread and add element to your quilts. Find out all you need to know about thread and…
What Is Quilt Binding?
Quilt binding is the process through which the binding tape is sewed to the quilt. As an object, quilt binding refers to the fabric that surrounds the edges of a quilt sandwich, for instance, top, backing, and batting combined.
How to Bind a Quilt by Hand
You’ve probably encountered numerous hand-sewn quilt binds on the internet that are perfectly done. If you are wondering how you can make such outstanding quilt binds, below is how to hand sew the binding on a quilt.
How to machine Sew Binding on a Quilt
Binding a quilt for beginners can be cumbersome when using hand stitches, especially if it’s your first time learning how to do binding on a quilt. Thanks to machine quilt binding as it allows you to complete your project within a short time.
How to Bind a Quilt with Mitered Corners
Mitered corners refer to when two edges meet at 40 degrees to make a corner of 90 degrees. You can miter the corners of your binding or borders, depending on your sewing needs. Want to learn how to execute this y-stream technique?
How to Bind a Quilt with the Backing
Learning how to attach binding to a quilt with backing can be exciting with the right tutorial. So, if you want to have fun while creating stunning projects, here is how to bind your work with a quilt backing fabric.
How to Bind Quilt Corners
If you want to know how to make corners on a quilt, consider the following steps:
How to Finish a Quilt Without Binding
Do you know how to finish a quilt edge without binding? Then let’s look at how to put a quilt together without binding.
How to bind a quilt?
Ready to get started? Here's what you'll need to bind your quilt: 1 Quilt sandwich — completely quilted with excess batting and backing fabric trimmed off 2 Fabric for the binding 3 Cutting mat 4 Rotary cutter or scissors 5 Ruler 6 Water-soluble marker (optional) 7 Iron and ironing board 8 Best Press clear starch spray (optional) 9 Pins or clips (optional) 10 Sewing machine 11 Thread
How to make a binding for a quilt?
Start at one end of your strip and begin folding it in half. Be sure your seams are on the inside of the fold. Begin ironing down that fold. I like to use Best Press spray at this step, as it helps get a firm crease in the fabric and makes the binding completely flat.
What is Quilt Binding?
Quilt binding is simply a folded strip of fabric that is used to conceal and bind the edges of your quilt to keep it from fraying.
How to make a quilt with mitered corners?
Step 1: Cut the fabric for your binding. Step 2: Sew strips together and iron. Step 3: Attaching the binding to the top of the quilt. How to Bind a Quilt with Mitered Corners. Step 4: Attach the binding to the back of the quilt.
Why do we stitch quilts diagonally?
The reason we are stitching them diagonally is that there will be fewer layers to sew through when we are attaching the binding to the quilt. Those seams will look a lot less bulky.
How to stop stitching on a quilt?
When you get closer to a corner, stop stitching about 4” away from the edge. Fold the binding over your corner on that edge first, then fold the other edge over. Slowly continue stitching until your needle goes through both corner pieces. Pivot the quilt, so you are ready to continue stitching the next side.
How much fabric do I need for a quilt binding?
To figure out how much fabric you need for your binding, you need to measure the perimeter (all four sides) of your quilt. I like to add another 10” to this number to make sure I have enough fabric. For my quilt top (60”x 62”), the sum of the perimeter is 244”. I’ll add 10” to that and come up with 254”.
How to make a quilt with double fold binding?
Start with a double-fold bias binding. ( Here is some information on making bias binding.) Begin sewing your binding onto the quilt in a curved section . When you approach the inside corner, stop with your needle down and , using a water- or air-erasable fabric marker, mark the inside the point of the binding by measuring in 1/4″ from the edge ...
How to sew a quilt around a quilt?
I usually use a ladder stitch, but you can use whatever stitch you prefer. Come up through the backing right at the corner. Then, take a stitch through the entire quilt at the corner, catching just a couple of threads of the binding on the back:
How to make sure the needle stops in the right place?
If you want, you can lift your presser foot and peer underneath the binding to make sure the needle has stopped in the right place in relation to the piecing on your top. Lift your presser foot and pivot the quilt so the edge of your 1/4″ foot lines up with the next edge of the quilt. Pull the binding around, too.
How to get tucks out of binding?
If you start sewing now you’ll get weird tucks in your binding, so use a skewer or a toothpick to gently push the excess fabric out of the way right in front of the needle. Lower the presser foot again and make sure the folds are still out of the way. You can keep the skewer in place as you take your first few stitches.
How to hold a quilt in place when you can't stitch it down?
Once you have pressed each corner, insert a pin just into the bottom part of the fold (the part that will be on the front of the quilt) to hold it in place until you can stitch it down .
How to keep skewer in place when sewing quilt?
You can keep the skewer in place as you take your first few stitches. Continue sewing around the quilt, stopping about 8 inches before where you started sewing the binding. Joining the binding on a curve works just like joining the binding on a straight section.
How to fold a book binding?
Trim any excess batting and backing now . Next, you will press the binding outward with your iron. The binding should fold naturally in the corners, but you can adjust it to make sure the top fold is right in the center of the corner. The fold should start right at the corner.
How to add mitred corners to quilt binding?
To add mitred corners on quilt binding, use a binding clip to hold the corner, fold the binding back down onto your quilt, aligning the raw edges along the next side. Clip your binding in place along this entire edge. Stitch this edge down, starting and stopping ¼in from each corner, as before.
What is binding a quilt?
Binding a quilt is also known as quilt edging, but whatever you call it, we’re here to help you do it. Don’t forget to browse our range of free quilting patterns for inspiration for different quilts to make with your new skills.
How to finish a quilt with a ditch quilting foot?
With your quilt face up, stitch in the ditch between your quilt and binding. When you reach a corner, put the needle down and pivot before sewing the next side. This will catch down the folded edge of binding on the back, while giving you an invisible line of stitching on the front.
How to stitch a quilt face up?
With your quilt face up, stitch in the ditch between your quilt and binding. When you reach a corner, put the needle down and pivot before sewing the next side. This will catch down the folded edge of binding on the back, while giving you an invisible line of stitching on the front.
How to make a quilt with two strips?
Using ¼inch (6mm) seam allowances, join the strips together to the length required. To do this, place one strip on top of another, at a right angle, so the two short edges match up as below. Draw a diagonal line where the two strips join and sew them together at right angles to create a diagonal join. You can see this step of the process in more detail in our binding a quilt video (above).
How to finish a binding?
Many people choose to hand finish their binding, stitching the folded edge with invisible stitches to the reverse. We used a contrasting thread here so that you can see the stitches, but if you choose a thread that matches your binding, the stitches will blend right in. Remember to take a few stitches along the folds of your mitred corners to hold these in place.
How to make a quilt sandwich with raw edges?
You should now have a quilted sandwich with raw edges all around the edge.Press the quilt sandwich and trim the edges so they are even with the quilt top all round. Check the quilt is right-angled. Now you’re ready to get binding!
What makes a good quilt binding?
Even if you don't enter shows, a poor binding can seriously effect a quilt's overall appearance. A quality quilt binding is: Full - the top, batting and backing extend to the very outside edge of the completed binding.
Why is bias better on quilt edges?
Some believe bias wears better on the edge of a quilt due the extra threads along a bias line. Straight grain binding, because it has fewer threads along the binding edge, is a weaker edge finish. But as with all things "quilting", there is never one, single right answer.
What is double fold binding?
Double Fold Binding. (sometimes called French Fold Bias Binding) This is the most used and durable quilt binding. It is made from a double layer of quilting fabric using either the bias or straight of grain. Easy to apply.
What is a facing on a quilt?
Facings, instead of bindings, are used to finish the edges of a quilt. The quilt design simply stops at the edge. A nice finish for contemporary quilts.
Can you use prairie points on a quilt?
It can be used in combination with adding prairie points or ruffles or just as it is. A quilt backing is sewn with to the quilt top and batting with right sides together, leaving an opening on one side. The quilt is then turned and the opening slip stitched closed. Quilting can be added at this time.
Is commercial binding good?
Commercially made binding can be a great time saver, if you choose the right one. There are two types:
Do hand stitches show on quilt binding?
If you've attached your binding by machine and pulled it around to the back to tack down, the hand stitches used should not show on the front of the quilt. If you use your sewing machine to tack down your binding, if the stitches are to show, make them neat and tie them off properly.
How long should a tail be on a quilt binding?
5. Start sewing the binding in place on an outer curve as shown below. Leave a tail about 8" long loose from the quilt.
How far away should you backstitch from where you started?
Keep sewing until you get 12" to 14" away from where you started. Backstitch and remove the project from your machine.
