how do you build a slide on a hill

• Use metal stakes or tent pegs to hold the corners in place. ...
• You can use heavy objects to weigh down the corners of the slide, but don't use anything that will injure you if you run into at a high speed. ...
• Make sure that the slide is secured in place. ...
• A smoother slide is a safer slide. ...

Full Answer

How to make your own water slide step by step?

Make Your Own Homemade Water Slide: Step By Step Guide. 1 1. Find A Good Location. The absolute best location for a water slide would be a long, cleared, grassy area with a slope. If you can find a hill, ... 2 2. Pick Out Your Slide Material. 3 3. Lay Out The Slide Material. 4 4. Add A Side To The Slide. 5 5. Secure The Slide. More items

Where is the best place to build a water slide?

The absolute best location for a water slide would be a long, cleared, grassy area with a slope. If you can find a hill, great, but look the longest stretch of open grass that you can use. Of course if you’re building the water slide in your own yard, you’ll be limited by your yards size.

How do you make a slip and slide in a shed?

Having a main water source at the top that runs to the bottom as well as sprinkles of water along the way makes for a slippery, cool and fun slide. Pro tip:Have leaky old hoses in the storage shed? Drill holes in them, then line the edges of the slip ‘n slide for a continuous water source all the way down.

How do you make a slide slide go faster?

Ensuring there is enough water on the slide at all times is essential to getting ample acceleration and avoiding friction burns. Having a main water source at the top that runs to the bottom as well as sprinkles of water along the way makes for a slippery, cool and fun slide. Pro tip:Have leaky old hoses in the storage shed?

How do you make a slip and slide hill?

0:229:56How to Make a Giant (100ft) Slip N Slide | I Like To Make Stuff - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe've got these two pieces of pipe that I'm going to cut in half and these are going to be the feetMoreWe've got these two pieces of pipe that I'm going to cut in half and these are going to be the feet for both of the side stands PVC cuts really easily with the handsaw or with a miter.

How do you make a slide on grass?

DIY Slip 'N Slide TutorialSTEP 1: Choose a location for your DIY slip 'n slide. ... STEP 2: Fold the plastic sheeting in half lengthwise. ... STEP 3: Use landscape anchor pins to fix the sheeting in place. ... STEP 4: Turn on the hose; consider adding baby soap for extra slipperiness. ... STEP 5: Have a blast!

How steep can a playground slide be?

Slide and Embankment Steepness: Per the Consumer Product Safety Commission's (CPSC) Public Playground Safety Handbook toddler slide chutes should have an average slope no more than 24 degrees. No section of a toddler slide should be steeper than 30 degrees.

What do you put at the bottom of a slide?

What do you put under a slide? The area directly underneath a slide sees heavy traffic, so the flooring needs to be highly durable. A rubber mat for playground slide use can provide this extra durability.

How do you make a slippery slide?

Add inexpensive dish soap or shampoo to the surface of your slide to make sliding easier and faster. Then turn on your hose or sprinkler to get water flowing down the slide. Add more of the dish soap/shampoo to the slide periodically to keep it slippery.

How steep Should a slide be?

Calculations. There are guidelines for the safety standards behind every slide. The simple rules are that the overall angle from top to bottom must not exceed 40 degrees. 35 degrees is more normal, 40 is a little steep.

How far off the ground should a slide be?

Requirements for slides: high should be 11" or less, and the exit height of slides over 4 ft. high should be at least 7" but not more than 15". The fall zone around slides should be at least 6 ft on all sides, except at the slide's exit. For slides up to 6 ft.

How do you calculate the length of a slide?

What is the length of the slide? Generally for slides the length is about twice the deck height it is made to fit. For example, a slide that is meant for a 5 ft deck height will be approximately 10 ft long.

How high should slides be?

Slides up to 4 feet in height should have an exit height of 11 inches or less. Slides over 4 feet in height should have an exit height of at least 7 inches but no more than 15 inches. The exit region of slides should be essentially horizontal and have a minimum length of 11 inches.

What is the best material for a slip and slide?

Find the Perfect Spot For Your Slip-and-Slide We recommended a 100-foot piece of plastic ⏤ because that makes for a long, fun glide ⏤ but if a plastic sheet that long cuts across three of your neighbor's lawns, go smaller (or roll it up).

How do you make a concrete slide slippery?

0:462:33Q&A: concrete pool slide- best way to make it slicker? - YouTubeYouTubeStart of suggested clipEnd of suggested clipLittle one by one tiles to make them slippery. And then the same thing with that is you could use aMoreLittle one by one tiles to make them slippery. And then the same thing with that is you could use a tile sealer to make it a little bit slick.

What is the best soap to use for slip and slide?

Tear-free baby soap or Original Dawn dish soap are your best options. Though again, we can't stress enough that your Pogo inflatable slip and slide doesn't need anything added to it to be slippery. When you're all done using your slip and slide, be sure to clean it thoroughly as well.

How do you make an outdoor slide?

1:475:46How To Make: DIY Slide with Sides - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe're cutting these notches into the metal here you need this either when it's flat or when you bentMoreWe're cutting these notches into the metal here you need this either when it's flat or when you bent it that'll make it much easier to fold the whole thing up fold.

How do you make a slide from scratch?

In the slide pane click on the slide where you would like the new slide to appear below. Click on the New Slide button located on the Home tab in the Slides group. The new slide should appear below the selected slide. If you want to add a new slide between two, select the first of the two slides and click New Slide.

What can I use to make a slide?

It's inexpensive, easy to build, and won't take much of your time. As for materials, you'll need pool noodles, plastic, Velcro tape, scissors, landscape staples, and sprinklers. Get the tutorial for Slip and Slide on hgtv.com.

How do you make a rolling slide?

2:4111:53How to Build a Rolling Pipe Slide - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo make the pipe slide we're going to cut these two lengths to go between the holes we've alreadyMoreTo make the pipe slide we're going to cut these two lengths to go between the holes we've already drilled in the sides of our slide.

How far should a DIY slide be from the house?

The DIY slide should be located near the house. Maintain a buffer zone of at least 12 feet around the slide structure, since the plastic slide will horizontally extend 80 to 90 inches.

How to build a ladder for a slide?

Make a ladder from two 5-foot two-by-fours as the vertical rails and four 2-foot two-by-fours as rungs. Use screws to construct the ladder. Attach the ladder to the side of the slide structure.

How high should a slide be?

Plastic slides mount at 5 feet high, so the deck of the slide structure too will be 5 feet high. This is high enough that you'll need to build balusters and hand railings to keep everyone safe.

How high should a handrail be?

Mount the handrail at least 36 inches high, with vertical balusters running between the floor and bottom of the handrail. Balusters should be no more than 4 inches apart from each other. Leave a cut-out area for the slide and for the ladder. Build the handrail and balusters from two-by-fours.

What is needed for an indoor slide?

All it takes is a sheet of 3/4-inch melamine-faced MDF board, foam pipe insulation, and optional mending plates

How much does a plastic slide cost?

Plastic slides alone cost about $175 to $250. The DIY slide structure is 16 square feet, measuring 4-foot by 4-foot. Plastic slides mount at 5 feet high, so the deck of the slide structure too will be 5 feet high. This is high enough that you'll need to build balusters and hand railings to keep everyone safe.

How much gravel is needed for a post hole?

Each post hole receives about 4 inches of gravel to promote drainage.

How to build a water slide in your yard?

The absolute best location for a water slide would be a long, cleared, grassy area with a slope. If you can find a hill, great, but look the longest stretch of open grass that you can use. Of course if you’re building the water slide in your own yard, you’ll be limited by your yards size.

Where to secure a slide on a slope?

Some people might want to secure the slide on the edges all the way down the slope, which is a good idea. But the most important part of securing the slide for us, has been at the top of the slide. If you don’t secure the top properly, it ends up getting all bunched up, and the rest of the slide all the way down gets shifted out of place.

Where should the tarp be on a slide?

The tarp at the top of the slide should be on top, and the tarp at the bottom of the slide should be underneath. 4. Add A Side To The Slide. We found it best to add a side to the slide to help keep the water flowing in the right direction, and to keep the sliders on the slide better.

How to prepare for a slide?

To prepare the location, remove all the rocks or sticks from the area. You’ll want to do this before laying out the slide. You can always lift the slide material up and remove any rocks you find after, but finding a rock after you’ve gone down the slide is usually a bit painful. It doesn’t take long to walk the location and look for roots, holes, rocks, and sticks.

How much does it cost to build a slide?

This whole project should take about a half an hour, and can be done for under $60 for a large slide up to 100 feet. You could do it for under $30 for a smaller slide depending on what you use as your slide material.

How to stop someone from sliding through rocks?

Consider using dirt to fill any holes, and dig up any large protruding rocks that could injure someone sliding through the area.

Can you use Velcro on a pool slide?

Using this Velcro method will add time to the setup and might not even be necessary if you have a straight, evenly sloped, slide. You could also just secure the pool noodles in place as you secure the slide in the next step, but securing the top of the slide, laying some pool noodles under the edges, and folding the plastic under them, has worked really well for us.

Friday, March 18, 2011

I wanted to post about playground hills today. Almost every person I talk to wants a hill in their learning landscape, with an embankment slide of course. It is kind of a trademark of natural play. Most folks picture a grass hill that is perpetually green and mowed (by someone else ;).

About Michelle

My interests in nature, education, and design overlap in learning landscapes. I am inherently drawn to them. I hope this is a place where I can organize and share my thoughts, ideas and inspiration. I have over 10 years of experience in recreation, park, nature play and school design at GreenWorks landscape architecture in Portland Oregon.

What is a slip and slide made of?

And as it happens, industrial-strength polyethylene makes for an epic slip ‘n slide. Store-bought slip and slides are usually made of plastics that tear easily and are often too short to support the level of propulsion this summertime staple warrants — but it’s not just about the material. Here are five pro-tips for constructing an awesome DIY slip ...

Why is it important to have enough water on a slide?

Ensuring there is enough water on the slide at all times is essential to getting ample acceleration and avoiding friction burns. Having a main water source at the top that runs to the bottom as well as sprinkles of water along the way makes for a slippery, cool and fun slide.

What are Americover slip and slide liners?

Americover has several single-panel slip ‘n slide liners that can help protect you and your participants from small protruding rocks or sticks. These liners are also built to withstand the heavy wear and tear this popular attraction is sure to incur. 3.

What to use to lubricate slip and slide?

Pro tip: Use tear-free baby soap to lubricate your slip ‘n slide, especially when kids are participating in the fun.

What is the most important component of a slip and slide?

Arguably the most important component to an epic slip ‘n slide is the lubrication that makes the slipping and sliding possible! Many people use dish soap for more viscosity, but getting soap in your eyes can bring the fun to an end pretty quickly.

Can you use polyethylene sheeting for slip and slide?

While we highly recommend building your own homemade slip and slide, it is important to note that not all plastic sheeting is created equal. Americover’s polyethylene sheeting solutions are built to withstand a variety of industrial applications, from pond lining to crawl space encapsulation, which means they’re not just for your run-of-the-mill backyard picnic. They’re equipped to handle up to hundreds of campers or college students and can be reused for years to come.

How to stop erosion on a hill?

A compact and elegant solution to this is to terrace your hill. Using homegrown and natural materials, you can put together a series of stages or “terraces” that break up your slope and act as plateaus. This stops run-off from just flowing straight down a hill.

Why Is It So Important To Prevent Erosion On A Hillside?

Soil erosion is the steady and gradual loss of soil to natural elements like wind and rain. In the aftermath of a rainstorm, soil run-off jams up important channels and exposes soil to degradation. When you add gravity to the mix, the harmful effects of erosion occur that much quicker. Soil erosion affects more than your immediate property — it can spell trouble for the entire area.

What can you do with stacked terraces?

You can then use these stacked terraces or plateaus to plant cover crops and seeds intended to hold the soil together, compact it, and contribute its nutrient content.

Why is sandy soil more likely to run off than clay soil?

Keep in mind that sandy soils are more likely to run-off than soils with a clay make-up because the particles in sandy soils are looser. Drainage: To measure the drainage on a hillside, you can dig a hole and fill it with water then check back in an hour or two. If there’s no water remaining, natural drainage is good.

Do all hills and slopes have the same topography?

Not all slopes and hillsides are created alike. The topography of the land surrounding your home or building determines which method you’ll use to stop erosion.

Can vegetation grow on a slope?

When examining your property, you may find that there’s a thick layer of rock underneath the soil that won’t support vegetation (yet). You need to build up the thin soil and support it for a few seasons before anything can grow on your slope. That’s when geotextiles and erosion control blankets come in use.

How Do You Build on a Sloped Lot?

There are two ways to build a house on a sloped lot: using the “cut and fill” method, or making use of stilts.

Why Build on a Sloping Site?

It’s no accident that some of the most coveted homes in the world are built on slopes. Here’s why:

How to prevent rainwater from pooling in a house?

Rainfall runoff has to be redirected away from your home’s foundation, without endangering any neighboring properties with water flows and without flooding public roads. Retaining walls have to be “tanked” (waterproofed) and drained to prevent water from pooling there. Swales and culverts can usually be used to channel the runoff to stormwater drains or soakaways (holes dug in the ground and filled with rubble that allow surface water to percolate back into the ground).

What is stilts in construction?

Using stilts is an alternative to cutting into the slope that involves using a crane to lift the home onto supporting wood or steel columns. This can be a much more cost-effective method than cut and fill and can also open up the realm of possibilities for home placement, such as building out over trees or water.

What is the appeal of a house on an incline?

The landscaping. For many, the main appeal of having a home on an incline is the striking aesthetics it presents , which includes the opportunity for breathtaking landscaping. The space. Lots with steep slopes allow for the extra space of a walkout basement that serves as another floor of the house. Natural lighting.

How steep is a steep slope?

Less than 10% incline is considered slight and is the easiest to build on, while 11-20% is considered moderate. Anything above 20% is deemed steep. Beyond about 15%, costs begin to increase significantly as the risks become greater and the work becomes more difficult.

Why is it important to build on a slope?

The seclusion. For those who place a premium on privacy, building on a slope allows you to select a location far off the beaten path.