A bump feed works by feeding the trimmer line out when the head is struck on the ground. To use a bump feed, hold the trimmer so that the cutting head is at a right angle to the ground and strike it lightly on the ground. The trimmer line will advance a short distance with each strike.
How do you use a bump feed Trimmer?
A bump feed works by feeding the trimmer line out when the head is struck on the ground. To use a bump feed, hold the trimmer so that the cutting head is at a right angle to the ground and strike it lightly on the ground. The trimmer line will advance a short distance with each strike.
Can I use any Stihl trimmer line with my trimmer head?
NOTE: Not all STIHL trimmer line is compatible with your STIHL trimmer head. Please refer to your trimmer head instruction card to determine the correct diameter and length of STIHL trimmer line you will need. If you do not have this card, you can download a digital version online at STIHL Product Instruction Manuals.
How do I determine the diameter and length of Stihl trimmer line?
Please refer to your trimmer head instruction card to determine the correct diameter and length of STIHL trimmer line you will need. If you do not have this card, you can download a digital version online at STIHL Product Instruction Manuals.
How does a line advance Trimmer work?
The line is advanced by running the head of the trimmer along the ground, which causes it to spin. As the line wears down, more line is fed out from the spool automatically.
How do you bump a feeder trimmer?
0:282:5449290 / BC35TS-2 - Using the bump knob on the line trimmer - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd we just bump this on the ground like so then the line will move out around about 10 millimetersMoreAnd we just bump this on the ground like so then the line will move out around about 10 millimeters each time we bump it but the head of the machine must be rotating firmly.
How do you load a Stihl bump feeder head?
7:3611:22Trimmer Line Replacement — STIHL FS 40C Bump Feed - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you've got a bump verify that you can push it in with your thumbs you should be able to do thatMoreAnd you've got a bump verify that you can push it in with your thumbs you should be able to do that or if something's jammed. And you just need to pull it out and redo it.
How do you advance a trimmer line?
0:181:21Advance the Trimmer Line on an Electric Trimmer - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo before it gets to that point we're going to need to feed some more line out the way to advanceMoreSo before it gets to that point we're going to need to feed some more line out the way to advance more line is to while the trimmer is running tap it once on the ground.
How does a bump feed trimmer head work?
Bump feed electric weed eaters With a bump feed weed eater, when you press the head of your trimmer against a flat surface, it squeezes a spring in the head of the string trimmer. This action releases string from the spool so you have a line with which you can cut down debris.
How do you fill a bump head trimmer?
0:161:58How to re-fill a grass trimmer bump-feed AutoCut 25-2 headYouTubeStart of suggested clipEnd of suggested clipYou look inside the head in the spool. There you'll see a couple of small holes in there which youMoreYou look inside the head in the spool. There you'll see a couple of small holes in there which you push the line into this time. And put the other one in the other side there.
How do you fill Stihl trimmer line?
5:566:41Stihl Trimmer Line Replacement - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst make sure that the arrows and the spool housing. And the spool are aligned then firmly insertMoreFirst make sure that the arrows and the spool housing. And the spool are aligned then firmly insert the end of the line into the outlet hole as far as you can approximately two inches repeat.
Why does my trimmer line not feed?
0:051:22Top Reasons String Trimmer Line Not Feeding - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe trimmer line itself could be the wrong size for your trimmer or stuck in the trimmer. Head lineMoreThe trimmer line itself could be the wrong size for your trimmer or stuck in the trimmer. Head line that is too thick or too thin for the trimmer head won't feed properly.
How does string trimmer auto feed work?
The Automatic Feed Spool (AFS) is the technologically advanced line feed system found on Black & Decker string trimmer products. Using centrifugal force, the system monitors the amount of line being used and feeds more line automatically as the cutting line shortens.
How does Stihl AutoCut work?
The AutoCut mowing head has a line storage device and the line is fed while the machine is running. This is done by tapping the top of the mowing head on the ground. This opens the holding mechanism for the line and centrifugal force causes line to be fed out.
What is Bump line feed?
Bump-feed string trimmers utilize a spring underneath the spool. When you tap or bump the head against the ground more line comes out. Automatic-feed string trimmers utilize an automatic-feeding system that pushes more line out whenever it gets too short.
What is an auto feed head on a strimmer?
Line guide Bump feed - When the line starts becoming short, a bump feed system allows you to simply tap the head on the ground to release more line. Automatic feed - This mechanic means more line will be given out automatically when it starts to become too short, meaning you don't need to worry about triggering it.
How do I fix the auto feed trimmer?
0:111:52String Trimmer Line Won't Feed Properly | How to Fix Feeding IssuesYouTubeStart of suggested clipEnd of suggested clipThe cap allows you to feed more line when you tap it on the ground. If the cap is damaged or worn itMoreThe cap allows you to feed more line when you tap it on the ground. If the cap is damaged or worn it can malfunction causing wine not to advance to inspect the cap remove it and clean any debris.
How do you change the head on a Stihl FSA 56?
0:001:31Replacing AutoCut® 2-2 Trimmer Line on FSA 56 - YouTubeYouTubeStart of suggested clipEnd of suggested clipNext depress these two chaps on the melon head and the cap and spool will release. You can nowMoreNext depress these two chaps on the melon head and the cap and spool will release. You can now remove the old. School. Clean the mowing head of any grass dirt or debris. Then with your new autocad.
How do I change the string on my head trimmer?
0:163:58How to Replace a String Trimmer Head - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut once you put down in the hole you have to turn the head. Until it locks in place okay. RightMoreBut once you put down in the hole you have to turn the head. Until it locks in place okay. Right there it just locked. So now the other thing is most time they're threaded opposite.
How do you load a Stihl Supercut 20 2?
1:052:20How to re-fill a Supercut 20-2 grass trimmer head with nylon lineYouTubeStart of suggested clipEnd of suggested clipPull it out you must go across the top of the bail on the side and then drop it down through theMorePull it out you must go across the top of the bail on the side and then drop it down through the island. Same on this side pull it out around the back of the bail.