in 4 Simple Steps!
- Step One - Make a Drawing Grab a 25-foot or longer tape measure and a pen and paper. ...
- Step Two - Measure Now you need to measure each room and write down the measurements on your diagram. ...
- Step Three - Calculate Make a list of your measurements and multiply the length by the width of each room. ...
- Step Four - Add extra for seams ...
How do you calculate carpet?
Steps
- Draw a diagram of the room you want to carpet.
- Draw lines on the diagram to make an oddly shaped room into shapes that can easily have areas calculated such as rectangles, squares and triangles.
- Measure the sides of the room using a measuring tape, and write the numbers in on the diagram where they belong.
How do you calculate square footage of carpet?
- Divide the space into smaller sections.
- Measure each section separately and calculate the square footage of each.
- Use a calculator to add the numbers together to get the total square footage.
How do you calculate carpet size?
Things to consider when calculating carpet
- The carpet calculator only provides an estimate. ...
- Carpet is generally available in measurements of 12 and 15 foot widths. ...
- Not all rooms are as straight as they seem. ...
- Don't forget about closets, hallways, stairs, and doorways when measuring carpet.
- When measuring an "L" shaped room, measure each section separately and add them together.
How much does carpet cost per square yard?
This means you need to balance your desired look and effect with your remodel budget. Carpet costs $9 to $180 per square yard, another common measurement manufacturers use. When you request estimates, make sure you know if the price is per square foot or per square yard. Carpet tiles cost $1 to $6 per square foot.
What is the formula for area of a carpet?
Many builders tend to add half the actual area of a terrace or dry area in the total carpet area. The formula you should use for calculation is Carpet area = Area of bedroom + living room + balconies + toilets – the thickness of the inner walls.
Is carpet measured in feet or yards?
Most retailers sell carpet by the square foot, but some sell it by the square yard. Carpet is often sold in pre-cut rolls of either 12, 13.5 or 15 feet width.
How much carpet do I need for 12x12 room?
The average cost to carpet a 12x12 bedroom is $250 to $1,100 total or $2 to $8 per square foot to install....Bedroom carpet cost.SizeAverage total cost10x10$175 – $75010x12$200 – $90012x12$250 – $1,10012x15$300 – $1,4003 more rows•Aug 18, 2021
How many square feet are in a 12x12 room?
144 square feetNext, multiply the length by the width to calculate a room's total square footage. So if a bedroom is 12 feet wide and 12 feet long, it is 144 square feet total (12 x 12 = 144 sqft).
How do I calculate carpet yardage?
Multiply the length and width (in feet) of each room to be carpeted. Next you will want to calculate your overage so multiply the total by 1.1 to make sure you don't run short. Divide the total by 9 to get square yards. 132 / 9 = 14.7 square yards.
Is carpet exactly 12 feet wide?
Wall-to-wall carpeting comes in rolls, and these rolls often come in 12-feet widths; however, depending on the carpet manufacturer, you might also find carpet widths of 13'2” and 15'. Carpet manufactured in other countries is typically four meters wide, which translates to 13'2”.
How much carpet is needed for a 10x10 room?
How Carpet is Sold. Retailers sell carpet in precut widths on a roll, most commonly 12 feet in width. 13.5- and 15-feet widths are also available. If you have a room 10 feet wide by 10 feet long, you'll need to purchase a 12 foot by 10-foot section of the roll.
How much does it cost to carpet a 10x12 room?
Generally, you can expect to add between $1 to $2 per square foot for installation. This translates to a cost range of $120 to $240 to install carpet in a 10×12 room.
How many square feet is a roll of carpet?
The total square footage is 100 square feet. But since carpet is available in a minimum 12-foot wide roll, and you have to purchase the entire width no matter the length, 100-square feet of 12-foot wide carpet is only 8-feet 4-inches of carpet length.
How many square feet is in a 20x20 room?
How many square feet is a 20x20 room? The square footage of a room 20 feet wide and 20 feet long is 400 square feet. The square footage is found by multiplying the width (20 ft) by the length (20 ft).
How many sq ft is a 12x24 room?
Square footage: 288 sq. ft.
How many square feet is a 12x15 room?
180 square feetLiving room: 12 feet x 15 feet = 180 square feet.
Is carpet priced by square foot or square yard?
Carpet Cost Per Square Foot/Yard On average, carpet costs $2.50 per square foot, and that price can range between $0.65 and $12 per square foot, or around $10 per square yard. The price can vary depending on the material, weave and pile style.
How many square yards of carpet will be needed for a 21 ft by 15 ft room?
15 feet x 21 feet = 315 square feet. A square yard is equal to 3 feet x 3 feet or 9 square feet. 315 square feet divided by 9 square feet/square yard = 35 square yards.
How much carpet do I need for 1000 square feet?
Because there may be waste due to carpet roll width, pattern matching and other issues, the rule of thumb is to add 10% to the square footage of the area (multiply by 1.10).
Is a carpet measured by width or length?
Measure the maximum length and width at the widest points, remembering to measure into the door frame as the carpet or vinyl should end under the door. Carpets are manufactured in 4m or 5m widths and the width of carpet ordered will be rounded up to 4m or 5m. e.g. the above size should be rounded up to 4m x 4.25m.
What is the standard unit for carpet length and width?
The standard units for length and width is feet, and for the carpet area is square footage.
Is flooring made of rectangles?
It’s likely that the flooring is made up of multiple rectangles, like in our example here.
What is the cost to install the carpet?
Depending on who you use and where you are in the country, the cost of installing carpet can range. Many companies sub-contract out the installation, meaning they aren’t the companies employees but a separate company.
Why do we need carpet?
Getting a new carpet (or carpeting for the first time) is a great way to change a room’s look and feel. We recently finished our basement and adding carpet totally changed the whole area’s look and feel. Carpeting rooms in a house adds warmth, and there is an added benefit of how it cuts down on noise reduction. It’s also a great way to add new options to your space. It’s one of the best types of flooring you can have.
What to do when carpet gets delivered?
When the carpet gets delivered, walk the path and see what it will be like to get the carpet in. Are there tight corners? Will you need to bring the carpet rolls in through the window (we did this)? Are there issues on the floor that you can deal with before they get there? These tips can help cut down on the carpet installation timeline and save you money too.
What to consider when buying a carpet?
Another thing to consider when buying a carpet is the style. Will you want a Berber, shag, kanga back carpet, carpet tile, or something else. It depends on the look of the area and personal preference.
How much does it cost to carpet a room?
The average cost to carpet a room. The average cost to carpet a room is roughly $4 to $6 a square foot, depending on whether or not you do it yourself. Of course, this will change based on the type of carpet you use and whether or not you get a professional installer to do the job for you.
What happens if you flood a basement?
If you have had flooding in the basement or water seeping from the basement floor and you are replacing the wet carpet due to a flood or a hot water tank leaking, see if your insurance covers the removal of the carpet at that cost.
What does "take furniture out of the room" mean?
This can mean taking the furniture out of the room and placing it somewhere else. It can also mean storing these items elsewhere during the install. Carpet installers are much happier when they arrive at a job and don’t have to be movers.
What do the lines on a carpet mean?
In this image, the lines represent the direction of the carpet pile. Note that the shortest measurements would result in the carpet running in different directions. Cheryl Simmons
How deep is a closet?
If the closet is standard size (usually about 2'6" deep) and has a sliding door that is on a track, then the direction of the carpet is not as important, unless it is a patterned carpet. Because the track divides the carpet, it will not be noticeable if the pile is turned in the closet.
Why do walk-in closets have a lot of leeway?
Closets have a bit more leeway in their requirements because they are often small and dark. Obviously, large walk-in closets should follow the same guidelines outlined thus far, because a change in pile direction will be just as noticeable as it would be in other areas. But for smaller closets, it's possible to get away with bending the rules.
What is the most important rule in carpeting?
Direction of the Pile. The most important rule in carpet is that you must always keep the carpet running in the same direction. You can't turn one piece sideways to the other. Doing so will cause the two pieces to look very different from each other, sometimes even like different colors.
How much to add to the width of a carpet?
So, for the above example, you would need to add 3” to the length (if you are seaming two pieces of carpet on the side) and 3” to the width (if you are seaming two pieces of carpet on end).
How many ways to handle the situation described on the previous slide?
There are two ways to handle the situation described on the previous slide, with one way being optimal for carpet performance.
Which is better, option 1 or option 2?
Even though it costs more and leaves more carpet unused, Option 1 is the best option because the carpet will stand up better in the hallway. However, Option 2 could be considered for lower traffic households, or for a more budget-friendly installation.
How to measure stair riser?
Measure upward across the tread and riser of 1 stair. Set your tape measure at the back edge of the tread, and measure the tread from front to back. Then bend the tape measure down at a 90° angle and continue measuring in the same direction down the riser. (The riser of a stair is the vertical board that elevates each tread above the previous.) Calculate the distance from the back of the tread to the base of the stair’s riser.
How to measure the width of a stair tread?
1. Measure the width of 1 tread with a tape measure. The tread of a stair is the horizontal part of the stair on which you step. With a tape measure, measure from 1 side of the stair tread to the other side.
How to calculate carpet area for stairs?
Calculate the area of a landing and add it to the area of the stairs. Find the landing measurements that you calculated earlier. Multiply the landing’s length times its width. This will give you the total area of the landing (and the riser just below it). Add this number to the total area of the stairs to calculate the total surface you’ll need to purchase carpet for.
How to measure carpet for landing?
Measuring the carpet for landings is straightforward: use a tape measure to calculate the length and width of the landing. While you’re measuring the width of the landing, bend the tape measure and measure the height of the riser directly beneath it.
How much to add to carpet width?
Add 2 in (5.1 cm) to the total width measurement. When carpeting professionals install the carpet, they’ll bend about 1 inch (2.5 cm) of it over on either end so that the rough-cut carpet edges aren’t visible. Without these extra 2 inches (5.1 cm) added to the measurement, you’ll find yourself short on carpet.
How to find the square footage of a step?
1. Multiply the measurements to find the square footage of 1 step. Multiplying the rounded length and width measurements will yield the square footage of a step. The square footage—also called the area—of a step will give you the number of square feet (or meters) that you’ll need to cover with carpet.
Why round up measurements?
Rounding the measurements up will ensure that you have a little extra carpeting to cover the steps in case any gets thrown away.
How to measure carpet area?
To measure for a carpet, measure each area individually following the steps listed below. Figuring carpet area means multiplying width times length for each area and adding them together. You’ll follow slightly different methods for rooms and stairs.
What is remnant carpet?
Carpet remnants. These common roll widths means you’ll purchase more carpet than you actually need, typically about 10% to 20% more. These extra pieces are called remnants. Use them in out-of-the-way spots like closets.
How to calculate square footage of a room?
Multiply the length times the width or enter those into the calculator above. This is your total square footage for that room.
What does it mean to choose the right carpet for your home?
Choosing the right type of carpet for your home does mean varying costs and design choices. As part of your flooring research, look into the various types in our carpet buying guide. Then calculate carpet costs by type.
How wide is a roll of carpet?
How Carpet is Sold. Retailers sell carpet in precut widths on a roll, most commonly 12 feet in width. 13.5- and 15-feet widths are also available. If you have a room 10 feet wide by 10 feet long, you’ll need to purchase a 12 foot by 10-foot section of the roll. A couple of notes to consider before purchasing:
How to find the number of feet on stairs?
Divide by 12 and round up to get the number of feet. Measure the width of the stairs and round up to the nearest foot . Multiply the width from step 4 by the length from step 3. Add in any landings you have. Multiply the width and length of the landing. Add that number.
How many inches is 7+7+2?
7+7+2 = 16 inches. 7 inches for each rise and run plus two inches for the nose and overage
Step 1: Layout area to be carpeted
To use the flooring calculator, do a layout measurement of each room or area to be carpeted. Simply sketch out the shape of the room, indicating doors and other recesses, and note adjoining floor surfaces (this helps determine the carpet needed in doorways).
Step 2: Measure length and width
Measure the length and the width and record these on your sketch. Use the flooring calculator above by entering your length and width to obtain an estimate of your room. Record the square feet and square yards on your sketch.
Step 3: Use our yardage calculator
We will be able to use these measurements from the flooring calculator to assist you in estimating your carpet needs. Be sure to list both measurements, since the total square footage of the room size may not correspond to the square feet (or yards) of carpet that will be used.
How is Standard Carpet Sold?
Carpet rolls come in two standard widths: 12 and 15-foot-wide rolls. You may also be able to find uncommon roll sizes, like 13.5-feet-wide. One square foot of carpet is a foot long by a foot wide, so there are nine square feet in a square yard of carpet.
How Much Padding Do I Need?
It protects the bottom of the carpet and prolongs its lifespan. However, you probably won’t install padding in humid regions or rooms like a basement. The padding type also depends on your needs .
How Much Carpet Do You Need to Repair Tears or Pet Damage?
If the carpet on your stairs needs repair, whether from pet damage or tears over time, replace the area. Measure the entire damaged area, avoiding the seams. A 4-inch incision in the middle of a step would require enough carpet to stretch the whole stair or the next available hem, for example.
How to calculate carpet needed for stairs?
Find the tread and riser measurements, adding them together. Multiply by your number of stairs for the total carpet needed for your stairs. Remember to exclude the top step unless your carpet running continues across the floor.
Why do you put padding on stairs?
Padding allows the carpet to last longer on a staircase. It can also help absorb sound from squeaky stairs. When you install the padding on stairs, keep in mind that the padding is a couple of inches short from the wall to account for tack strips, holding the material in place.
How to measure carpet for stairs?
In general, you can measure stairs for carpeting by using the equation width x ( (run + rise + nose) x number of stairs) = area . However, calculating how much carpet you need varies based on the stair type, shape, and size, as well as the configuration of your staircase.
How to count how many stairs to carpet?
Count to see how many stairs you plan to carpet. Multiply the number of stairs by the number from step 2 (the rise and run of your stairs). Round to the nearest foot.
