Full Answer
How do you calculate the area of a countertop?
Some countertops are as easy to divide into rectangles, as we saw in the kitchen above. However, the calculations for the area are the same. To calculate the area of the oddly shaped piece below, we will follow the same formula: Area = Length × Width
How do you calculate the area of an oddly shaped piece?
However, the calculations for the area are the same. To calculate the area of the oddly shaped piece below, we will follow the same formula: Area = Length × Width To calculate the amount of edge necessary, we will add up all the edge lengths that will be polished.
How do you calculate the area of a polished edge?
Another factor will be the total edge length that will be polished (sides marked with an “x” on the sketch), which is calculated in linear feet. To calculate this number, we will add all the lengths marked with “x” on the sketch. (NOTE: RED piece polished edge area will be: 100”- 26” = 74”)
How do I calculate the volume of stone?
Calculate the volume of stone by entering your dimensions in imperial units ( inches, feet or yards) or metric units ( centimeters or meters ). The calculator will take care of any unit conversions so you don’t need to! The total volume of a rectangular prism is calculated by: The total volume of a circular prism is calculated by:
How do you find the area of a marble?
1:425:56How to calculate the Quantity of Marbal on floor and its price in Urdu ...YouTubeStart of suggested clipEnd of suggested clipCalculating it mulpus total pieces organism. Is called y square caesura. Multiplications are occur kMoreCalculating it mulpus total pieces organism. Is called y square caesura. Multiplications are occur k my first total pieces are in me.
How do you calculate the value of marble?
Breaking Charges. Rate(Rs. 15 x 350 Sq. Ft = Rs 5250.Fitting, Cutting of Marble With Material. Rate(Rs. 110) 110 x 350 Sq. ... Mirror Polishing. Rate(Rs. 25) 25 x 350 Sq. Ft = Rs 8750.Total = (5250 + 38500 + 8750) = Rs. 52500. Above Rate for fitting includes material like sand cement and other Material.
How do you calculate the square footage of a marble slab?
Find the number of square feet of marble tile you need. Measure the floor, countertop or other area where you plan to install marble tile. Multiply the length by the width. For example, a ten-by-fifteen-foot floor area contains one hundred fifty square feet.
How do you calculate tile area?
Tiles sold individually will note the dimensions of the tile in inches on the packaging. Multiply the tile length by the width to figure the area that one tile will cover in square inches. Divide the result by 144 to convert it to square feet.
What is the value of marble?
When it comes to collecting, condition is everything. Some mint in-the-box marbles from the 1930s can sell for as much as $5,000 (the boxes are rare), and a single marble can sell for $30 if perfect.
What is the price of marble per square foot?
Amount of Marble Needed If a particular type of marble is rare, it will be more expensive than more common types of marble. This is why the cost of marble per square foot can range from $40 to $100, with the average cost around $60.
How do you calculate square feet for tile?
Measure the length in feet, Measure the width in feet. Multiply the length figure by the width figure. This will be your total square footage for that portion of your project. Continue to repeat this for all parts of the space that will get the same tile.
How do you calculate countertop square footage?
Chapter Three: Calculate Total Countertop Square Footage To calculate the total square footage (after placing seams) you will need to follow this formula: “L” x “W” / 144 = s.f. (Length times width divided by 144 = square feet). Kitchen base cabinets are generally 24″ in depth.
How do you calculate length width height and square feet?
To calculate the square footage of any area, all you need to do is multiply the length and the width of the area (how tall x how wide).
How many square feet are in a 12x12 tile?
Since a 12 by 12 ceramic tile is one square foot, the number of square feet equals the number of tiles you need to cover the floor space. However, you should allow for cutting tiles to fit or breakage, so add 20 percent to your measurement.
How many square metres is 40x40 tiles?
how many 40×40 tiles in a square meter:- there are 7 tiles of 40×40 cm or 16× 16 inch or 400×400 mm size in a square meter. Thus 7 tiles of 40×40 cm or 16× 16 inch or 400×400 mm size are needed to cover one square meter area of your room.
How many 60x60 tiles is 1 square meter?
2.8 tilesThis is a common question and ultimately this depends on the size of the tile. A 150 x 150mm will give you approximately 44 tiles to a square metre, but a 600 x 600mm tile will give you 2.8 tiles per square metre.
What's the most expensive marble?
The Top 15 Most Valuable MarblesNo.NamePrice1Rare Huge Multi Colored Joseph Coat Vintage Marbles$600.002Rare Vintage Large Multicolor Glass Marble$449.493Large Antique German End of Cane Tri Level Latticino Core Marble$900.004Spotty Onionskin Shrunken Marble$800.0011 more rows
What is the rarest marble?
Single Gather Confetti Mica Marble While a painted confetti pattern is common on cheaper marbles, this marble's specks are made with mica crystals. In incredible condition for such an antique marble, Morphy's Auction house described it as the 'rarest marble to ever enter its auction house.
How can you tell cat eye marbles?
0:1817:25How to identify Cat's Eye marbles - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo the accepted definition for a cat's eye marble is any clear based machine made marble havingMoreSo the accepted definition for a cat's eye marble is any clear based machine made marble having between one and ten ribbons or stripes. Inside the matrix of the marble.
Is marble expensive or cheap?
Is Marble Expensive? Many homeowners and commercial property owners think marble is not a budget-conscious surface material; however, there is a wide price range. Marble countertop cost per square foot usually lands between $75 and $250, give or take.
How to calculate the amount of stone needed for a backsplash?
Using the formula Area = Length × Width , you can estimate the amount of stone necessary to cover either the entire backsplash or a short backsplash.
How to figure out how much stone to cover a backsplash?
Using the formula Area = Length × Width , you can estimate the amount of stone necessary to cover either the entire backsplash or a short backsplash.
What are the two most important factors that fabricators use to determine the price of a project?
The area and length edge of the countertops are the two single most important factors fabricators use to determine the price of the project. However, there are several other elements which can add to the price tag of the project you should consider.
How much overhang does Orange have?
The Island (ORANGE) has a 12” overhang.
What is the standard width of a base cabinet?
Standard width of a base cabinet is 24”.
How to convert square inches to square feet?
Now, convert square inches to square feet. Divide the total area by 144.
Is Marble.com a quick turnaround company?
When it comes time to get the job done, our fabrication and installation teams have the equipment and expertise it takes to get your project cut and delivered the right way, every time. We at Marble.com are known for our incredibly quick turnaround, as we understand having countertops and other mainstays installed quickly and properly is important to our customers. We value your time, and our goal is to create the best work possible and have you enjoying it as possible.
What is the stone calculator?
Estimating the amount of stone your outdoor landscaping project will require can be difficult.
What is bulk material calculator?
Our bulk material calculator is a powerful tool that will help you calculate the volume of stone required.
What are some examples of measurements?
For example, you can enter measurements of length in inches (in), feet (ft), yards (yd), centimeters (cm) or meters (m).
What Size Slab Do I Need for My Countertops?
The average size of a countertop-ready stone slab is about 115″ by 70″, or 60-70 square feet each – give or take according to the slab, quarry, and shipment. But how much slab do you need to fulfill your countertop needs? Should you buy one or two? Can you buy a half-slab or just as much as you need for the countertops? The question depends on how you want to choose your custom countertop cut, grain, and if you want first pick of the remnant stone.
How to add square footage to waterfall end?
To add the square footage of a waterfall-end, measure the height and width of the space you plan to cover. Be sure to talk to your stone fabricator about cutting the waterfall section to flow perfectly with the end of your island or countertop piece.
How deep is a 30 sq ft kitchen counter?
The standard depth for cabinets and countertops is about 25 inches. Therefore, the 30 sq-ft average assumes a total countertop length of about 14 feet. However, you can change the profile and square footage of your countertops by choosing to make them (and your cabinets) narrower for a slimmer countertop or shorten your counter for a little more exposed wall in the kitchen.
What is stone fabricator?
As stone fabricators, we are passionate about beautifully cut countertops. Sometimes, that means finding the slab with the perfect grain for your kitchen. We can line up the cutout of your countertops on the slab so that the grain sweeps beautifully over your surface and each seam is nearly invisible. This is an artistic cut, though can often leave larger remnants from the unselected sections of the slab. A creative stone fabricator can often help you build a beautiful multi-surface counter with careful and artistic cuts through each unique grain.
How many square feet is a kitchen countertop?
The average measurement for a kitchen countertop is 30 square feet. However, the variation between kitchen designs is vast. There are kitchens with much smaller or significantly larger countertop measurements. The right size for your kitchen will depend on the floorplan and counterspace you want in your kitchen design.
Can you measure countertops with a tape measure?
You will most likely find a kitchen that is similar to your own in the diagrams below, and you will be able to easily measure your countertops with a tape measure. It does not make a significant difference if your measurements are ½” off here or there because this is purely for estimation purposes.
How to find area in square meters?
Divide the area in square centimeters by 10,000 to find the area in square meters.
How to find the area of a circle?
Half the diameter is the radius. Square the radius and multiply by pi to find the area of the circle.
What is the radius of a sample circle with a diameter of 20 inches?
Therefore, the sample circle with a diameter of 20 inches will have a radius of 20/2, or 10 inches.
How to find circumference of a circle?
To find the circumference of a circle, simply multiply the diameter by pi (3.14). For example: If d= 23cm, C= 3.14 x 23cm, so C= 72.22cm.
How to measure the central angle of a sector?
Measure the central angle of the sector. Use a protractor to measure the central angle made by the two radii. Set the base of the protractor along one of the radii, with the central point of the protractor aligned with the center of the circle. Then read the angle measurement that corresponds with the position of the second radius forming the sector.
What units are used to calculate area?
Report your result. Remember that a calculation of area is going to be reported in “square” units. If the radius was measured in centimeters, the area will be in square centimeters. If the radius was measured in feet, the area will be in square feet. You should also know whether to report your result using the symbol
Can you measure the radius of a circle?
The radius will generally be provided to you. It can be difficult to measure to the exact center of a circle, unless the center is already marked for you on a circle drawn on paper.
-2.png)