how do you calibrate a stanley spirit level

How do you use a torpedo level?

• Clean off all edges of the magnetic torpedo level.
• Place the level on the desired magnetic surface to level.
• Release the level and wait a moment for the bubble to float to the top of the spirit tube.
• Get to eye level with the spirit tube and take note of where the bubble rests.

Full Answer

How to calibrate a spirit level?

Before you start calibrating the spirit level, make sure you have all the materials handy. First and foremost, you need a sturdy table. You will be using this table as the base to judge the level. Begin with the process by placing the spirit level on the table. Make sure you place it gently without using swift movements.

How to level the spirit level of a vape?

Begin with the process by placing the spirit level on the table. Make sure you place it gently without using swift movements. After you place the spirit level on the table, wait for 20 to 25 seconds. This will allow the level of the liquid to stabilize in case a swift motion was applied or too much vibration was generated while moving it.

How do I use the spirit level on the glass vial?

Note the point where the bubble rests on the spirit level's scale. This scale is printed on the outside of the glass vial. The next step is to turn the level. This will result in the top edge now going to the bottom as you have revered the spirit level.

What is a spirit level used for?

A spirit level is a tool that helps you gauge whether an object is level. The glass tube in the level is comprised of a liquid or a spirit like ethanol, which in turn indicates the exact reading. If the spirit creates an imbalance, the level will give out an inaccurate reading.

Can spirit level be calibrated?

An engineer's spirit level can be calibrated. Unlike cheaper levels, an engineer's spirit level allows you to check and correct imbalances in the level each time you use it. Cheaper levels do not allow you to calibrate, and you may not know, until it is too late, that their "spirit" is off.

How do you calibrate a digital spirit level?

0:293:21How to Calibrate a SmartTool Digital Level - YouTubeYouTubeStart of suggested clipEnd of suggested clipAllow 10 seconds to be safe carefully press and hold the calibrate button until Cal one shows on theMoreAllow 10 seconds to be safe carefully press and hold the calibrate button until Cal one shows on the display. The display will continue to flash showing the angle.

What do you do if a spirit level is not accurate?

Q: How do I check the accuracy of a spirit level?Place the level on a flat surface.Make two marks: One at an end of the level. ... Look at the vial and take a reading of the bubble's position.Rotate the level 180° end-to-end and align the level with your marks.Take a second reading.

How do I calibrate a level?

How to Calibrate Engineers Levels Clean the bearing surface, and the underside of the level to remove any dirt or dust. ... Note the position of the bubble after it has settled, (settling time can be up to 15 seconds) and then turn the level by 180° and place back onto the surface in the same position as before.More items...

How do I know if my spirit level is accurate?

0:205:17How to check your Level Accuracy - YouTubeYouTubeStart of suggested clipEnd of suggested clipMake one continuous control line all the way through I want you to put a control point over theMoreMake one continuous control line all the way through I want you to put a control point over the center of your vial. This is a reference point that will always return to why checking the level.

How can I true my spirit level?

1:314:27IS YOUR LEVEL ACCURATE? Here's How To Tell...(Broken Bubble Level ...YouTubeStart of suggested clipEnd of suggested clipIt like a helicopter blade don't flip it just rotate it and firend Center it up with your CenterMoreIt like a helicopter blade don't flip it just rotate it and firend Center it up with your Center mark snug. It up right to the undersides of the two reference lines that you drew out at the ends.

DO levels need to be calibrated?

Calibration is a best practice for industries that use precision instruments to measure length, mass, temperature, pressure, flow, volume, and more. However, level measurement can't be calibrated because there is not an external reference point.

Can you use a spirit level upside down?

Where a spirit level must also be usable upside-down or on its side, the curved constant-diameter tube is replaced by an uncurved barrel-shaped tube with a slightly larger diameter in its middle. Alcohols such as ethanol are often used rather than water.

How many degrees is a full bubble on a level?

Uses for a Bubble Level Plumb means the structure or object is straight vertically, meaning it creates a 90-degree angle with the ground so it is perfectly straight up and down.

What is level calibration?

Calibrated levels are used in a wide range of applications and are built in a variety of forms to suit usage within those applications. Traditional mechanical levels utilize an air bubble floating within a substance (usually a mineral spirit) inside a vial which is attached to a flat surface.

How do you calibrate a hand level?

1:022:15Hand Level Adjustments - YouTubeYouTubeStart of suggested clipEnd of suggested clipBy using a five foot steady stick and a level floor most slabs in your home or your garage or yourMoreBy using a five foot steady stick and a level floor most slabs in your home or your garage or your building your office is level enough to calibrate a hand level just find a nice flat floor.

How long to wait to test spirit level?

After you place the spirit level on the table, wait for 20 to 25 seconds. This will allow the level of the liquid to stabilize in case a swift motion was applied or too much vibration was generated while moving it. This will also produce a true reading.

How to check legitimacy of a level?

To check the legitimacy of the level, flip it around one last time. If the bubble shifts in the direction opposite to the reading, you need to readjust the level.