Mazda 3 Service Manual: Drive Belt Removal/Installation [Skyactiv G 2.0]
- 1. Remove the aerodynamic under cover No.2 and splash shield as a single unit..
- 2. Insert a wrench onto the cast hexagon on the drive belt auto tensioner and release the tension by slowly turning in the direction shown in the figure.
- 3. Remove the generator drive belt.
- 4. Install the generator drive belt.
Full Answer
Can you change the timing belt on a Mazda 3?
As we explained to you in introduction, changing a timing belt on a Mazda 3 represents a considerable budget, so we figure out that you are hesitant to do it and to allow you to figure out the value of this fix, so we will fairly quickly describe why it is so important to do it on time.
What to do if your Mazda seat belt is locked after accident?
If your Mazda seat belt is locked after accident, our seat belt repair after accident service is compatible with all Mazda models. We rebuild the entire mechanism making the seat belt like new again.
Do you have to replace the AC belt when changing drive belt?
*you have to replace the a/c belt when you change the drive belt, and the dealer makes you buy the kit which come with two jigs! its really insane! hence just buy it once save the kit and just get the a/c belt at auto part store in the future! here below is a tutorial of what you need!* 1. Remove the engine under cover and splash shield (RH).
What is included in Mazda seat belt repair services?
In addition to Mazda seat belt repair services, we offer seat belt webbing replacement if your seat belt is: All seat belt webbing replacement services include the new fabric material, the transfer of all hardware components, automated sewing machine stitching and the restitching of all original manufacturer tags.
How much does it cost to replace a serpentine belt on a Mazda 3?
The average cost for a Mazda 3 serpentine belt replacement is between $124 and $140. Labor costs are estimated between $59 and $75 while parts are priced at $66. This range does not include taxes and fees, and does not factor in your specific model year or unique location. Related repairs may also be needed.
Can I replace a drive belt myself?
Automatic belt tensioners, standard in most cars now, make changing a serpentine belt a simple DIY repair. Follow the clear photos and step-by-step instructions and you'll be done in 15 minutes.
How do you put a serpentine belt on a 2012 Mazda 3?
3:177:54[HD 1080p] How to Replace Mazda 3 Serpentine & AC Drive BeltsYouTubeStart of suggested clipEnd of suggested clipPut the back side of the belt against the water pump which was the shiny piece down there and putMorePut the back side of the belt against the water pump which was the shiny piece down there and put the rest of it. Around the alternator which you can see in the bottom of the frame.
When should I change my serpentine belt Mazda 3?
90,000 milesTypically, belt manufacturers recommend belt replacement at 90,000 miles. However, the belt must be inspected for wear or damage at regular intervals prior to this high mileage. Squealing noise, belt slippage, visible belt damage.
Is serpentine belt same as drive belt?
A serpentine belt actually has the ability to transmit the power between your power steering pump, your alternator, air conditioning compressor and water pump, whereas your drive belt simply operates them..
Is a timing belt the same as a drive belt?
The timing belt is responsible for making sure the engine's crankshaft, pistons, and valves operating insync or in time. (Hence the term timing belt.) Accessory drive belts are used to drive all the accessories that run off the front of the engine.
How do you change a alternator belt on a 2013 Mazda 3?
16:2518:592013 Mazda 3 Skyactiv Serpentine belt + Tensioner replacementYouTubeStart of suggested clipEnd of suggested clipTake your belt off put the new belt on. And there you go now like when you take the belt off you'reMoreTake your belt off put the new belt on. And there you go now like when you take the belt off you're gonna release the tension.
When should I replace my serpentine belt?
Under ideal circumstances, your car's serpentine belt should last 60,000–100,000 miles. It's important to replace this belt as part of your vehicle's scheduled maintenance (even if it looks okay) to avoid it breaking while you're on the road.
How do you put a stretch belt in a Mazda 3?
2:148:20Mazda AC Stretch Belt Replacement - YouTubeYouTubeStart of suggested clipEnd of suggested clipThese other bolts so i can kind of show you what i'm talking about. And again this is the easiestMoreThese other bolts so i can kind of show you what i'm talking about. And again this is the easiest way i've done. These. Especially you don't have to worry about hurting yourself under your knuckles.
What happens if a belt breaks while driving?
Your car cannot run with a broken timing belt. By the time the belt snaps, the damage is already done, and you will not be able to drive at all. You will need to have the vehicle towed to an auto repair workshop.
How much is a drive belt for Mazda 3?
The cost of having a Mazda 3 drive belt/s replaced varies between $100 - $400+ depending on the style of drive belt/s and if other engine components need to be removed to allow access to replace it. Sometimes you will get a noise warning when the drive belt tension has changed and it needs to be replaced or refitted.
How expensive is it to replace a serpentine belt?
But what does a serpentine belt replacement cost? Of course, it depends on your make and model as well as labor costs, but in general a replacement serpentine belt costs around $70-$200 (plus taxes and fees), including around $50 for the belt and around $150 for the labor.
How long does it take to replace drive belt?
It can take anything from 15 minutes to an hour (two at the most) to repair or replace a bad serpentine belt with a new belt.
How much does it cost to replace drive belt?
A typical serpentine belt start at around $25 and goes up to $75 at most. If you know some car repair basics, you could change the belt yourself, and it may save you paying labor charges somewhere between $75 and $120. All together, you're looking at around $100 to $195 to replace your serpentine belt.
How do I install a new drive belt?
1:032:15How to - Replacing a Drive Belt // Supercheap Auto - YouTubeYouTubeStart of suggested clipEnd of suggested clipCheck it with a tension gauge. With automatic tension systems gently allow this to apply the tensionMoreCheck it with a tension gauge. With automatic tension systems gently allow this to apply the tension to the belt. Start the engine and observe.
How do I know if my drive belt needs to be replaced?
Take some time to visually inspect your drive belt if it's in an easy-to-view spot. When you see that the belt is starting to wear out, get it changed immediately. A drive belt can function with pieces missing, but the more that's gone, the more likely it is to give out at any time.
What happens if the timing belt on Mazda 3 breaks?
So you might think that this belt is just an insignificant part, but the risks you take if you don’t change it in time are substantial. If the timing of your Mazda 3 breaks, you will undoubtedly have to change the engine of this one. In actual fact, the pistons will hit the valves and destroy them, and the camshaft will as well break. The faster the engine is running at the moment of the breakage, the more significant the consequences are. It is consequently vital to make your timing belt on time .
When to do the timing belt of its Mazda 3?
Nevertheless, check out your Mazda 3’s service book to get the exact life and maximum mileage you can accomplish before you do the timing . Generally, timing belts have a life of 5 to 10 years and a maximum mileage between 80, 000 and 200, 000km .
When do I need to replace/change the timing belt on my mazda?
Although timing belts are critical, there’s no need to replace them regularly –unless explicitly recommended in your mazda owner’s manual. Some automakers recommend changing a timing belt between 60,000 and 100,000, others don’t.
What happens when the timing belt breaks on my mazda?
You don’t want to know. But if you must, it’s not good. There’s usually a lot of noise, and if you’re driving you won’t be for long. You’ll be stranded, and your engine will probably be damaged (metal components can actually break, hence all the noise). How much damage is anyone’s guess. Bottom line? Don’t let this happen.
Does the timing belt on my mazda make noise?
A timing belt won’t make noise when it’s in good condition — aside from the usual noises that come with the symphony of moving parts of the typical internal combustion engine. However, when your timing belt starts to go, that’s another story.
When did Mazda start timing chains?
Mazda made the move to timing chains in the mid-2000s, and since we won’t get into the nuts and bolts of chain replacement, you would be better served referring to your service information. I’m always saying to check your service info before you dig into an unfamiliar job.
How many miles does a timing belt last?
We recommend that the timing belt be replaced, along with the water pump and accessory drive belts, at 90,000-100,000 miles. If the customer has budget concerns, we’ll explain why we recommend the pump replacement and let them take ...
Why does my Mazda make a rattling noise?
If you have a Mazda come in the shop with a rattling noise in the front cover/valve cover area, the noise is likely coming from the variable valve actuator/intake cam gear assembly. Mazda TSB #01-012/12 covers the diagnostics and procedures well; the problem is the lock pin on the actuator is damaged, allowing uncontrolled movement of the components. The TSB covers how to replace the actuator pulley without replacing the timing chain and refers you to the service manual if the chain needs to be replaced. If you’re working on a vehicle that is not eligible for factory warranty consideration, I wouldn’t take any chances and would recommend a chain replacement to your customer.
Do you have to remove valve cover to install TDC locator?
The valve cover is going to have to come off and some parts removal may be necessary to access the plug you need to remove to install the TDC locator.
Can you back off a timing belt with a spring attached?
Note: Don’t be tempted to simply back off the tensioner with the spring attached — that will result in stretching the spring beyond its useable tolerance. This engine relies solely on that spring tension to maintain the proper belt tension, so it’s critical that it be in good shape. While they’re available separately — and many timing belt “kits” will include them — there’s no reason to damage the original.
How long does it take to repair a Mazda seat belt?
We'll repair your Mazda seat belt within 24 hours and mail it right back to you!
Why do Mazda seat belts not work?
This happens because the retractor is equipped with a gas charge that goes off during a crash and locks up the mechanism. Engineered to protect the driver or passenger, these seat belts will not work after accident unless replaced or repaired. Here at Seat Belt Restore, we offer Mazda seat belt repair services offering the following:
What colors are available for seat belt replacement?
We offer color match service of all black, gray, tan and beige seat belt colors! Custom colors available of Red, Yellow, Blue, Green, Purple, Pink, Turquoise & more.
Can you replace a Mazda seat belt after an accident?
If your Mazda seat belt is locked after accident, our seat belt repair after accident service is compatible with all Mazda models. We rebuild the entire mechanism making the seat belt like new again. This is an affordable alternative to Mazda seat belt replacement that costs hundreds of dollars at the dealer. Get your Mazda seat belts repaired and be safe again. Save money and time. Ready to get started?
