How do i change the bulb in the dimplex CHT20 FIRE?
- 1.Remove the top coals (it is not necessary to remove the remaining coals).
- 2.Remove the two screws in the front of the brass grate assembly.
- 3.Lift the grate assembly upwards to detatch it from its retaining bracket and then lift the whole assembly away from the fire.
- 4.Remove the flame-effect rod from the motor shaft by pulling the rubber coupling off the shaft.
How to unscrew a light bulb?
How many light bulbs does a Dimplex fireplace have?
How to unhook a glass?
How many upper light bulbs are there?
Where did Grabkowski go to college?
See 2 more
About this website
How do you remove an electric fire bulb?
To change the bulb, remove the access cover typically located at the back of the fireplace before taking out the old bulb and replacing it with the new one. Put the access cover back onto the fireplace and restore the power. Turn on the electric fireplace to test whether the replacement bulb works.
How do you fix the flame on a Dimplex electric fireplace?
To fix the flame on an electric fireplace:Unplug the fireplace from the wall or isolate the power.Remove the access cover to the fireplace, typically located at the rear of the unit.If the bulb(s) have blown, replace them.If the motor that drives the rod has stopped working, replace the motor if possible.More items...•
Why is my electric fireplace not lighting up?
The circuit breaker might have tripped, causing the motor flame problem in your unit. The solution to this problem is as easy as flipping it back on. After checking the circuit breaker and fuse, move on to other parts of the electric fireplace. Check if there are any loose connections with the cables.
How long do Dimplex fireplaces last?
10-20 yearsHow long do they last? Electric fireplaces can last for 10-20 years depending on how frequently they are used.
Why does my Dimplex fire light keep turning off?
A buildup of dirt or dust can cause the heating elements to overheat, and in turn cause the fireplace to turn off. To check if your electric fireplace has excess dust, turn off your fireplace at the wall and unplug it from the socket. Allow the fireplace to cool down before attempting to check for dust or dirt.
How do you reset the flame on a electric fireplace?
SOLUTION: Turn all switches to the “off” position and unplug the unit from the wall for five minutes. After five minutes, power everything back on.
Why is my Dimplex fire not working?
-If the fires is not responding at all to the remote control, please check that batteries are installed in the remote control and ensure they are fitted in the correct way (see the + & - markings). If batteries are already installed, please try a new set available from most retail outlets.
Where is the reset button on my electric fireplace?
0:092:47Heat Surge Troubleshooting - YouTubeYouTubeStart of suggested clipEnd of suggested clipMake sure that the unit is now located near a heat source hit the reset button located on the backMoreMake sure that the unit is now located near a heat source hit the reset button located on the back of the unit where the power cord connects to the Heat Surge fireplace.
How do I make my electric fireplace brighter?
Some electric fireplaces come with canopy, or overhead, accent lighting. These LED lights can be very bright, and may wash out the flames below. Turning the overhead lighting off, or choosing a warmer colour, will help the flame to be more visible and vibrant.
Is it OK to leave an electric fireplace on all night?
The Short Answer Yes, it is okay to leave an electric fireplace insert on overnight but it's best if you turn it off when possible. While it's not necessarily dangerous, it's important to observe basic safety precautions when using an electric fireplace.
How many hours can you run an electric fireplace?
As long as an electric fireplace is plugged into one of your standard home electrical outlets or hard-wired into your home electrics, then these components of an electric fireplace will be able to run indefinitely, within reason.
Is it safe to run electric fireplace all the time?
No, it's not safe to leave your electric fireplace on all night. If the power goes out while you're sleeping then it might be hours before someone is able to come and turn off your unit for you, which could result in a fire. It's best to unplug the appliance after using or when leaving home.
Why is my Dimplex fire not working?
-If the fires is not responding at all to the remote control, please check that batteries are installed in the remote control and ensure they are fitted in the correct way (see the + & - markings). If batteries are already installed, please try a new set available from most retail outlets.
What makes the flame in an electric fireplace?
Typically, the light from a Light Emitting Diode (LED) reflects off of a spinning light refractor made up of three-dimensional patterns. This reflection creates the illusion of flickering flames and the glow of fire within the fireplace. In some models, the sound of crackling accompanies the glowing flames.
Where is the reset button on electric fireplace?
0:092:47Heat Surge Troubleshooting - YouTubeYouTubeStart of suggested clipEnd of suggested clipMake sure that the unit is now located near a heat source hit the reset button located on the backMoreMake sure that the unit is now located near a heat source hit the reset button located on the back of the unit where the power cord connects to the Heat Surge fireplace.
How long does a Dimplex transducer last?
The approximate life-span of this transducer is 1000 hours. Replacement discs and / or removal tool must be bought separately. Spare discs not included. PLEASE NOTE: this product is not manufactured by Dimplex, but it is designed to be compatible with Dimplex machines.
Dimplex Electric Fireplace Troubleshooting [7 Easy Solution]
Hello William, We purchased a condo that had one of these installed in it, but we can’t seem to get it to produce heat. There’s a wall switch (looking like a light switch) that seems to turn the unit on, and then three individual power switches hidden at the base of this model (one for the lighting effects, one for the fan, and one for something else?).
How to unscrew a light bulb?
Grasp the light bulb socket with your hand. With your other hand, gently turn the light bulb counterclockwise to unscrew it. Insert the new light bulb. Turn it clockwise.
How many light bulbs does a Dimplex fireplace have?
The Dimplex Electric Fireplace, model number DFB6016, uses a total of six light bulbs. The four lower light bulbs illuminate the "fire," while the two upper light bulbs provide light for the interior of the fireplace.
How to unhook a glass?
Secure the glass with your hands. Remove the clip from the top part of the glass to unhook the glass. Carefully lower the glass and set it aside.
How many upper light bulbs are there?
There are two upper light bulbs. These bulbs may or may not require replacing at the same time as the lower light bulbs.
Where did Grabkowski go to college?
Grabkowski attended college in Oregon. He builds websites on the side and has a slight obsession with Drupal, Joomla and Wordpress. eHow may earn compensation through affiliate links in this story.
How can I change the bulb in my Dimplex electric fire?
Please see the product instructions (which can be found on the manuals and guides tab of the relevant product page) or alternatively you can view our ‘How to change a lightbulb in your fire’ document.
How do I clean my Opti-V fire?
For general cleaning, use a soft clean duster – never use abrasive cleaners. The glass screen should be cleaned carefully with a soft, lint-free cloth.
How high can I install my Opti-V fire?
There is a choice of height when fitting Opti-V wall mounted fires. Recommended heights depend on the location of viewing.
Where should I position my Opti-V fire?
Due to the illusory reflection technique of the Opti-V, it works best when ambient light levels are low. For the best flame effect, place the fire in dimly lit areas.
Can I use an extension lead with my fire?
No. We do not recommend the use of an extension lead with any of our fires.
Where Is The Bulb In An Electric Fireplace?
The bulb in an electric fireplace is typically located within the center of the unit. The access cover, typically located at the back of the unit, will need to be removed in order to reach the bulb.
What type of light does an electric fireplace use?
Electric fireplaces contain some sort of light source, whether it’s LED lights or halogen bulbs. They use electricity in order to generate the flames effects by reflecting light from a bulb or LED onto the front of the fireplace in a specific pattern that mimics the look of flickering flames. Sometimes these lights inside an electric fireplace need ...
Why isn't my electric fireplace working?
You can typically tell when the bulb isn’t working in an electric fireplace because the flame effects aren’t being displayed. You’ll therefore have to replace the bulb (s) inside your electric fireplace in order for the flame effects to work again.
How many bulbs do you need to replace in an electric fireplace?
Depending on your model of electric fireplace there may be more than one bulb that needs to be replaced.
What is the method used to create the flame effect?
Electric fireplaces commonly use the rotisserie-style method of generating the flame effects where the light from a light source is reflected off a rotating set of strategically placed and angled mirrors onto the back of a screen.
When you switch on an electric fireplace, the flame effects should start again?
If you have successfully replaced the bulb (s) inside your electric fireplace then the flame effects should start displaying again when switched on.
How to remove a light bulb?
In order to remove the bulb rotate it in a counter-clockwise direction (using gloves or holding a paper towel) until the bulb comes free .
How to unscrew a light bulb?
Grasp the light bulb socket with your hand. With your other hand, gently turn the light bulb counterclockwise to unscrew it. Insert the new light bulb. Turn it clockwise.
How many light bulbs does a Dimplex fireplace have?
The Dimplex Electric Fireplace, model number DFB6016, uses a total of six light bulbs. The four lower light bulbs illuminate the "fire," while the two upper light bulbs provide light for the interior of the fireplace.
How to unhook a glass?
Secure the glass with your hands. Remove the clip from the top part of the glass to unhook the glass. Carefully lower the glass and set it aside.
How many upper light bulbs are there?
There are two upper light bulbs. These bulbs may or may not require replacing at the same time as the lower light bulbs.
Where did Grabkowski go to college?
Grabkowski attended college in Oregon. He builds websites on the side and has a slight obsession with Drupal, Joomla and Wordpress. eHow may earn compensation through affiliate links in this story.
