Typically, the belt on your Dyson DC14 vacuum cleaner goes from the motor spindle to the brush bar. The second belt on your DC14 is located in the clutch assembly. You’ll need to remove this part in order to replace the new one. Then, you’ll need to replace the brush housing plate.
How to change belt on Dyson DC14 vacuum cleaner?
To change the belt on your Dyson DC14, start by unplugging the vacuum cleaner. Typically, the belt on your Dyson DC14 vacuum cleaner goes from the motor spindle to the brush bar. The second belt on your DC14 is located in the clutch assembly. You’ll need to remove this part in order to replace the new one.
Does the Dyson DC14™ upright have a clutch?
If your Dyson DC14™ Upright vacuum cleaner features a clutch, as shown in the image above, please continue by clicking the link below. If your Dyson DC14™ Upright vacuum cleaner does not feature a clutch, as shown in the image above, please continue by clicking the link below.
Why does my Dyson vacuum have a clutch?
The purpose of a vacuum cleaner clutch is to stop the brushroll from the motor when the machine is upright preventing damage. If you’ve never replaced the clutch on your Dyson before, follow our advice below to get your problem swiftly sorted.
Does the Dyson Zorbster have a clutch?
However, the Zorbster uses a different clutch mechanism. The purpose of a vacuum cleaner clutch is to stop the brushroll from the motor when the machine is upright preventing damage. If you’ve never replaced the clutch on your Dyson before, follow our advice below to get your problem swiftly sorted.
How do I know if my Dyson needs a new clutch?
4:279:21Dyson DC07, how to check the clutch & Brush - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd it won't run freely. If this is at all stiff or not rolling it needs to be replaced.MoreAnd it won't run freely. If this is at all stiff or not rolling it needs to be replaced.
Does my Dyson DC14 have a clutch?
The clutch system is the same against variations of the DC07, along with the DC14 clutched models and the DC04. However, the Zorbster uses a different clutch mechanism. The purpose of a vacuum cleaner clutch is to stop the brushroll from the motor when the machine is upright preventing damage.
How do you change the belt and a Dyson DC14 vacuum cleaner?
0:233:25How to change the belt on a Dyson DC14 Vacuum Cleaner - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can simply lift the roller out and you'll see the reason that it's not spinning.MoreYou can simply lift the roller out and you'll see the reason that it's not spinning.
How old is a Dyson DC14?
The DC14 was released in 2004. It is a revision of the DC07 upright vacuum cleaner with lower centre of gravity and 'telescope reach'. It uses Dyson's Root 8 Cyclone technology, which maintains constant suction.
Where is the brush bar reset button on my Dyson?
1:072:13DYSON BRUSH BAR RESET - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis is the on/off button for the beater bar.MoreThis is the on/off button for the beater bar.
How do you remove the belt from a Dyson vacuum cleaner?
0:472:14How to replace the Dyson belt on a Dyson DC07 vacuum cleanerYouTubeStart of suggested clipEnd of suggested clipSee these three screws here just use a coin. And turn those through 90 degrees. And that pops off.MoreSee these three screws here just use a coin. And turn those through 90 degrees. And that pops off. So here you can see the belt. This one's actually a little bit slack.
How do I know if my Dyson motor has gone?
If your vacuum cleaner had a strong acrid burning smell before it lost power then the chances are the motor has failed which will require a motor replacement. In the event that your Dyson suddenly switches off and won't turn back on again then go through these steps.
How do I fix my Dyson head not spinning?
Most cases of a jammed or stuck brush bar are quick and easy to fix, simply pulling the debris gently from the brush bar. Alternatively, if you need to clear a problematic blockage, you can take the brush bar out of the housing easily, for quick maintenance.
How do you change a Dyson belt?
1:003:27Dyson DC17 Vacuum Cleaner Belt Replacement: Part # 911710-01YouTubeStart of suggested clipEnd of suggested clipIt's just very easy to unhinge. So now we have here the brush roller and the belt the Dyson beltMoreIt's just very easy to unhinge. So now we have here the brush roller and the belt the Dyson belt brush roller just shimmies. Right out of those slots.
How much did the Dyson DC14 cost?
The Dyson DC14 Animal Vacuum ($550) features the Root Cyclone constant suction system, automatic carpet height adjustment, a wand attachment that releases and expands up to 17 feet, and the unique advanced turbine head that cleans pet hair from confined spaces with all the fury that it uses to handle your floors.
How long should a Dyson vacuum last?
around 10 yearsA Dyson vacuum cleaner has a lifespan of around 10 years. This is considerably longer than most other vacuums. So, if you're looking for a high-quality vacuum cleaner that will last you for a long time, a Dyson could be a good choice.
How many filters does a Dyson DC14 have?
Your Dyson DC14 comes with two different filters, a pre-filter and a post-filter.
How do you remove brushes in dc14?
0:523:47Dyson DC14 Vacuum Roller Brush Bar (Clutch) Replacement - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou want to unscrew. All three of these screws. From the base of your vacuum cleaner. So once that'sMoreYou want to unscrew. All three of these screws. From the base of your vacuum cleaner. So once that's unscrewed just shimmy that base. Off.
How do you clean a Dyson dc14?
0:084:44Dyson DC14 - Basic Disassembly, Break Down and Maintenance.YouTubeStart of suggested clipEnd of suggested clipThe filter can be washed the dust cup can come apart like this as well as the tank on the bottomMoreThe filter can be washed the dust cup can come apart like this as well as the tank on the bottom side can be washed but this tank.
How do you remove the clutch on a Dyson dc07?
2:197:38How to replace the Dyson clutch on a Dyson DC04, DC07 and ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe just use a screwdriver just to pop it off the catch.MoreWe just use a screwdriver just to pop it off the catch.
How do you remove the engine from a Dyson dc14?
2:528:33How to replace and fit a Dyson motor - DC14 / DC07 - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis can be done using quite a large flat bladed screwdriver by simply prying away the top motorMoreThis can be done using quite a large flat bladed screwdriver by simply prying away the top motor retainer as. Follows. Now by giving the motor shaft a couple of short taps. This will remove the motor.
Where does the clutch fit?
The clutch fits into the soleplate housing and we will be changing it. On the clutch assembly there are two belts. The smaller one fits over the motor and the larger one over the brush bar itself.
How to secure clutch cover?
Carefully place the clutch cover into position and secure it with the three holding screws using your torx kit.
How to get a belt off a screwdriver?
The next part can be quite tricky as the belt may slide off the screwdriver, but with some perseverance we know you can do it. Lever the screwdriver upwards and slide the belt over the end of the brush bar. You can then take the screwdriver off the belt and slide the brush roll until the belt goes over the correct position on the brush bar. Just ensure the brush bar is positioned correctly and give it a spin to make sure the belt is fitted properly.
How to get a spherical actuator off?
Get a flathead screwdriver and pop it under the actuator from the front and then the back to release it from the catch. Once it’s off you should see the two catches on the inside of the actuator.
How to remove brush bar from a hose?
There are plastic holders at the bottom which you can turn out at 90 degrees with a coin or a flat head screwdriver. Next separate the brush bar from the drive belt. This can be a little tricky but you just need to pull the brush bar up and twist the belt off. Finally the brush housing should pop off.
How to make sure clutch is secured properly?
To make sure the clutch is secured properly into the housing make sure it aligns correctly with the two grooves here and here. You can then fit the side actuator cover back on.
Can you stretch a belt on a motor spindle?
We now need to get the belt stretched and positioned on the motor spindle. As this is a brand new belt it doesn’t have any slack, but you should be able to ease it over the spindle with a little bit of effort.
Where is the live chat button on Dyson?
The live chat button will appear on the bottom right corner of your screen as soon as a Dyson Expert becomes available. You can also find helpful troubleshooting advice and get more information by clicking on the automated chat icon in the bottom left corner of your screen at any time. Phone. 844-705-4777. Our helpline hours:
Does Dyson use cookies?
Dyson websites use cookies. By continuing to use our websites, you accept that cookies may be stored on your device, as outlined in our cookie policy. Thanks. We've saved your preferences. You can update your contact preferences at any time in the Keep in touch section of Your Dyson.