Follow these steps to replace the EGR valve in your Toyota Camry:
- Remove the negative battery cable from your battery terminal.
- Locate the EGR valve—it should be connected to your car’s intake.
- You’ll likely find a cluster of hoses in the area. ...
- In the connected pipe, you may notice a buildup of gunk and carbon. ...
- Insert your new EGR valve and reconnect all your hoses.
- Remove the negative battery cable from your battery terminal.
- Locate the EGR valve—it should be connected to your car's intake.
- You'll likely find a cluster of hoses in the area. ...
- In the connected pipe, you may notice a buildup of gunk and carbon. ...
- Insert your new EGR valve and reconnect all your hoses.
Where is the EGR valve on a Toyota Camry?
0:264:51How to Replace EGR Valve 97-01 Toyota Camry - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe EGR valve is located here on the backside of the intake manifold remove the vacuum line at theMoreThe EGR valve is located here on the backside of the intake manifold remove the vacuum line at the top of the EGR. You may have to twist this a little to get it to free.
Can you replace an EGR valve yourself?
It should be done by a professional Replacing the EGR valve is highly technical work for the average car owner and should usually be done by a trained auto mechanic to avoid any subsequent issues from occurring. However, if you possess the skills to perform the task yourself, replacing it shouldn't be too difficult.
Where is the EGR valve located in Toyota?
To accomplish this task the EGR valve is attached to the intake manifold of the engine. This location is atop of the engine near the carburetor, usually towards the back of the engine near the firewall.
How do you tell if your EGR valve needs to be cleaned or replaced?
EGR valve symptoms can vary, however, the most common symptoms of a faulty EGR valve are explored below:Your engine has a rough idle. ... Your car has poor performance. ... You have increased fuel consumption. ... Your car frequently stalls when idling. ... You can smell fuel. ... Your engine management light stays on.More items...•
How long does it take to change EGR valve?
Usually the replacement of the EGR valve is completed after 1 hour. For some older models, half an hour is sometimes sufficient. For tighter built models, the replacement can take 2-3 hours.
Can you drive with no EGR valve?
As per my research and going through the threads on EGR valves its OK to run without EGR. Yes it might affect the environment but no harm to engine as such. there are people who are running without EGR for more than 50k km. Also in all remapping they disable the EGR.
Does a Camry have an EGR valve?
Follow these steps to replace the EGR valve in your Toyota Camry: Remove the negative battery cable from your battery terminal. Locate the EGR valve—it should be connected to your car's intake. You'll likely find a cluster of hoses in the area.
Where are EGR valves located?
Where Is the EGR Valve Located? The EGR valve is located close to the intake manifold, with a tube leading to the exhaust manifold. A vacuum or an electrical connector (or both) which leads to a valve can be seen as well, which might need to be detached.
How do you clean an EGR valve without removing it?
0:061:42How To Clean A EGR Valve With Spray Without Removing It - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe air intake pipe that comes off the air box. Simply undo it take the can and then trade it in inMoreThe air intake pipe that comes off the air box. Simply undo it take the can and then trade it in in small intervals.
Can I clean my EGR valve myself?
An Easy Repair You Can Do at Home If your car is running poorly, you may be having problems with your exhaust gas recirculation valve, or EGR. While you can't test your EGR valve function from home, you can clean it there, a simple task that effectively acts as a repair.
Does cleaning the EGR valve work?
Cleaning your EGR valve will solve your car's engine performance issues related to any clogging or system passages problem with the valve. Even more importantly, it'll prevent serious engine damage and expensive repairs.
How much does it cost to fix EGR valve?
The average cost of replacing the EGR valve in your vehicle is anywhere from $250 to $350 on average, depending on your vehicle's year, make, and model as well as the type of system it has. The cost of parts will be somewhere around $190 to $270, while the cost of labor will be anywhere from $60 to $80.
How much does it cost to replace an EGR valve?
The average cost of replacing the EGR valve in your vehicle is anywhere from $250 to $350 on average, depending on your vehicle's year, make, and model as well as the type of system it has. The cost of parts will be somewhere around $190 to $270, while the cost of labor will be anywhere from $60 to $80.
What are the symptoms of a failing EGR valve?
Here are the 8 common signs of a failing EGR valve :Poor Mileage. Poor Mileage. ... Loss in Performance. Loss in Performance. ... Higher Emission. Excessive smoke from the tailpipe. ... Knocking Sound. Engine Knocking. ... Rough Engine Idling. Rough Engine idling. ... Smell of Fuel. Fuel smell. ... Engine stalls while idling. ... Check Engine Light ON.
What are the symptoms of a faulty EGR valve on a diesel?
5 Common Symptoms Of A Failing EGR ValveRough Idle. Any change in RPM at idle should be cause for concern. ... Excessive Smoke. Modern diesel engines produce next to no smoke. ... Increased Fuel Consumption. ... Decreased Engine Performance. ... Check Engine Light.
Does cleaning the EGR valve work?
Cleaning your EGR valve will solve your car's engine performance issues related to any clogging or system passages problem with the valve. Even more importantly, it'll prevent serious engine damage and expensive repairs.
Where is the EGR valve located?
The EGR valve is near the throttle body. If you follow the intake towards the engine, you'll soon spot the EGR.
How much does it cost to replace an EGR valve?
However, you might be able to go to your local junkyard and find your replacement there for about $15 to $20.
What to do if check engine light comes back on?
If, after starting your engine, there is no difference in your engine's performance or if the "check engine" light comes back on and you get the same code, you will need to replace the valve.
What year was the Toyota Camry?
This article applies to the Toyota Camry (1997-2001).
Mike Butler
There is a VSV (vacuum switching valve) , usually mounted on the back side of engine block, under the intake manifold, as well as the map sensor, that can also cause that code if one or the other is faulty.
Anonymous
If you have small hands it can be easy. The space between firewall and EGR is tight but it wasn't too difficult to remove. The vacuum hose at the bottom was hard to pull off and I ended up cracking it and had to splice it. It was more difficult to re-install the EGR then remove it.
Anonymous
hello, to fix this problem what you need to do is replace your egr valve its a pretty straight forward replacement ,to get a new one goto any auto parts store and tell them what you need thay all carry egr valvs in stock cost is about 30.00$
toneman2121
the egr system consists of control circuits as well as the egr valve itself. troubleshooting will have to be performed in order to pinpoint the fault. the valve may just need cleaning.
Step 1 – Locate The EGR Valve
Step 2 – Label Hoses
Step 3 – Clean The Valve
Step 4 – Reinstall Your EGR Valve
Step 5 – Replace The EGR Valve
- If you need to replace the valve, take off the old valve and then install a new EGR valve. You just removed the original one five minutes ago, so this should be pretty easy by now. A brand new EGR valve from Toyota will cost you around $60. However, you might be able to go to your local junkyard and find your replacement there for about $15 to $20....
Related Discussions