How to Install a Gasket on a GE Refrigerator
- 1. Soak the replacement GE refrigerator door gasket in a tub of hot water to remove the kinks and bends in the gasket cased during shipping and storage.
- 2. Transfer the items for the refrigerator into an insulated cooler. Turn off the GE refrigerator's temperature control. ...
- 3. Remove the screw holding the hinge cover to the top of the refrigerator. ...
How to test and replace a bad refrigerator gasket?
How to Test a Freezer Gasket
- With a flashlight, inspect the freezer gasket for tears, holes and other visible damage. Check the insides and outsides of the gasket around the entire door.
- Close the freezer door on a crisp dollar bill. The bill’s paper is the perfect thickness for checking gasket seals.
- Clean the gasket with a solution of 1 tsp. ...
How do you replace a refrigerator door gasket?
- Use petroleum jelly on the gasket to fix small gaps. Simply pull the gasket away from the channel to expose a couple of inches (.05 meter) in the door corner. ...
- Push the gasket back in the channel. Repeat the process, and pack other corners if you think that’s needed.
- Close the refrigerator door again and look for gaps again. ...
How to fix your refrigerator door gasket?
If you suspect that your seal warped, do the following:
- Turn off the fridge and open the fridge door. Remove any perishables and put them in a cold place (like a cooler) to store.
- Grab a hairdryer or clothes steamer, then start using it to heat the door seal. ...
- Use your fingers to pull and straighten your warped seal. ...
- Once you’ve adequately stretched and pulled your seal into place, let it cool. ...
How to replace the gasket on a refrigerator door?
Tips On How To Replace Your Refrigerator Door Gasket
- Prepare the New Gasket. Before performing refrigerator repairs, make sure the unit is powered off. ...
- Remove the Old Gasket. Grab the inside edge of the gasket and pull it back to uncover the screws holding the gasket to the retainer.
- Install the New Gasket. ...
- Inspect the Refrigerator Door. ...
How do you replace the gasket on a GE side by side refrigerator?
0:351:41Press the rigid edge of the gasket into the grooved retaining channel on all sides until it is snug.MorePress the rigid edge of the gasket into the grooved retaining channel on all sides until it is snug. Then close the door and check for a proper seal if the gasket buckles when closed.
How do you install a GE refrigerator gasket?
2:053:23Once you have it lined up you want to make sure that the white rib is going into the channel. AndMoreOnce you have it lined up you want to make sure that the white rib is going into the channel. And then you can go around the whole door and press it into. Place.
Can you replace a refrigerator gasket yourself?
To replace the seal on your refrigerator door, start by submerging the new gasket in warm water so that it's softer and more pliable. Then, remove the old gasket by lifting the edge up and turning the screws underneath. Once you've loosened the screws, pull off the old gasket and dispose of it.
How do you replace the gasket on a GE French door refrigerator?
0:221:34Begin at any corner of the door and firmly pull the gasket out of the retaining channel until it'sMoreBegin at any corner of the door and firmly pull the gasket out of the retaining channel until it's entirely removed. Be sure the new gasket is thoroughly dry before you install it.
How long does it take to replace a refrigerator gasket?
If the bill slips out easily and moisture and/or mold are present, it's time to invest about $50 to $75 (depending on the appliance brand and door size) and 30 minutes to replace the refrigerator door gasket.
Why is my GE refrigerator leaking water from the bottom?
If the defrost drain is frozen, the water will overflow the drain trough and drip down to the bottom of the compartment. This water can eventually leak onto the floor. Check the defrost drain to determine if it is clogged or frozen. If the defrost drain is frozen, thaw the ice.
How do I know if my fridge gasket is bad?
Close the refrigerator door on a $1 bill or small piece of paper, trapping it between the gasket and fridge. Slowly pull the paper out. You should feel some tension as you do so; if not, the gasket may be weak or broken at this point. Repeat this test around the whole of the gasket's length.
How much does it cost to replace a gasket on a refrigerator?
Fridge Seal Replacement Cost The average price to replace the seal depends on the size and model, averaging $60 to $100.
What kind of glue can I use on a refrigerator seal?
Loctite 1371637/1360784 0.58 oz Stick'N Seal Extreme Conditions Adhesive.
How do I know if my fridge seal needs replacing?
One way to tell if a seal is bad is the paper test. Put a piece of paper between the door and the fridge, close the door and then pull. If the paper slips out easily, it's time to replace the gaskets because it isn't sealing. Test the gasket with a piece of paper.
How do I fix a leaking GE refrigerator?
If your GE refrigerator is leaking water on the floor in front of the unit, the line may be loose or damaged. To inspect the water line, remove the kick plate at the bottom of the refrigerator. Make sure the line fits securely inside the water inlet valve, tightening it if necessary.
Where are refrigerator gaskets located?
A refrigerator gasket, or a refrigerator door seal, is a flexible elastic strip attached to the outer edge of a refrigerator or freezer compartment. This gasket is designed to form an air-tight seal that serves as a barrier between the cool air inside the appliance and the warmer external environment.
How do you reattach a refrigerator seal?
Using a cotton swab, push some petroleum jelly into the groove underneath the loose rubber. This will make it easier to push the rubber back into place and will help seal any leaks. Then, just push the seal back into the channel.
How do you fit a fridge gasket?
0:592:02It's recommended to use a specialist fridge cleaner which is available on the buyspares. Website toMoreIt's recommended to use a specialist fridge cleaner which is available on the buyspares. Website to fit the new seal start at one corner and make sure it's pushed firmly into the groove all the way.
What kind of glue can I use on a refrigerator seal?
Loctite 1371637/1360784 0.58 oz Stick'N Seal Extreme Conditions Adhesive.
How do you reattach a gasket on a freezer?
0:582:01Thoroughly clean and dry the gasket. Channel lay the new gasket on the door. Line up one corner andMoreThoroughly clean and dry the gasket. Channel lay the new gasket on the door. Line up one corner and push the rubber Ridge down into the channel. Once the gasket is seated in each corner.
How to remove a gasket from a refrigerator door?
Slide a putty knife between the bottom edge of the gasket and the refrigerator door. Pry the gasket from the metal retainer holding the gasket to the refrigerator. Grab the gasket with your hands and pull it from the GE refrigerator door. Discard the original gasket.
How to secure freezer door to top of refrigerator?
Place the freezer door on the double hinge. Close the freezer door and secure the top hinge to the top of the GE refrigerator with the torx-head screws you removed previously.
Why do refrigerators need gaskets?
A damaged gasket can allow moisture to accumulate around the refrigerator door opening and the gasket. A worn gasket can make it difficult to keep the inside of the refrigerator cool enough to keep food from spoiling.
How to tap gasket in door?
Tap the gasket into the retainer, using a plastic cap hammer. Pay particular attention to the corners when tapping the gasket in the retainer.
Who is Cecilia Harsch?
Cecilia Harsch has been writing professionally since 2009. She writes mainly home improvement, health and travel articles for various online publications. She has several years of experience in the home-improvement industry, focusing on gardening, and a background in group exercise instruction.
Can dry ice be used in a cooler?
Use dry ice in the cooler to store the freezer items.
How to stop freezer door from dragging?
Finally, reduce the freezer gasket drag by applying a thin layer of petroleum jelly only along the hinge side of the gasket.
How long does it take to replace a refrigerator door gasket?
If there is a slight drag on the bill, your door gasket is OK. If the bill slips out easily and moisture and/or mold are present, it’s time to invest about $50 to $75 (depending on the appliance brand and door size) and 30 minutes to replace the refrigerator door gasket.
Why does my refrigerator leak?
Each door of your refrigerator has a molded rubber gasket to keep the cold in and the heat out. When this gasket gets old and brittle, it leaks. If your refrigerator is running more frequently and you suspect it’s losing cold air, conduct these simple tests.
Where to find refrigerator model?
If you don’t have a manual, look on the inside edge of the refrigerator door or inside either compartment, near the door, for the manufacturer’s identification plate. Search online under “Appliances, Major, Parts” for stores or manufacturer service centers that stock your door gasket. You may also be able to find a parts source by visiting your manufacturer’s website.
HOW DO YOU TEST A REFRIGERATOR DOOR SEAL?
Start by conducting a simple visual inspection. Take a close look all around the refrigerator and freezer gasket. You're looking for any spot where the gasket is not completely flush with the either the fridge door or the main unit. Mold, crumbs, and other small food debris could be enough to spoil the airtight seal.
How to clean a gasket that is warped?
Use warm soapy water and a soft dishcloth to carefully wipe down the gasket and the surface it seals against. Take care to gently open the folds of the gasket to remove any crumbs. If the gasket is cracked, split, or warped, you will likely need to replace it.
How to check if refrigerator gasket is broken?
Close the refrigerator door on a $1 bill or small piece of paper, trapping it between the gasket and fridge. Slowly pull the paper out. You should feel some tension as you do so; if not, the gasket may be weak or broken at this point. Repeat this test around the whole of the gasket’s length.
Why does my fridge keep running?
If your fridge runs constantly, it could be a sign that the gasket is allowing warm air inside—and cold air to escape.
What happens if your refrigerator door is not sealed properly?
Warm interior: If your refrigerator door is not sealing properly, the most obvious symptom is that the fridge interior will be too warm. Condensation: If warm air is seeping into your fridge, you will end up with high humidity and condensation inside the refrigerator itself.
How to check a gasket for cracks?
Some cracks and splits may be difficult to detect unless you get hands-on. Open the door and check the whole of the inner edge of the gasket closely, using your fingers to gently extend the gasket and look for damage within the folds.
How to remove old gasket?
Make sure the replacement gasket has had a chance to warm up and assume its correct shape after shipping. Tip: Heat the new gasket slightly with a hair dryer or a heat gun on a low setting to make it more flexible.
How to remove a plastic door seal?
Pull the gasket out of the door to remove it once you have loosened the retainer screws. Once all of the screws are loose, the door seal should easily slide out from behind the plastic liner. Don't be too forceful when doing this step, since some plastic liners can be quite brittle and crumble if you are too rough.
How to test a gasket on a refrigerator?
You could also test the gasket with a dollar bill. Put the dollar bill between the refrigerator door and refrigerator, and close the door on it. Then, try to pull it out slowly. If you feel it drag slightly, your gasket doesn’t need replacing. If it slips out quickly or has moisture on it or mold, get a new gasket.
How to keep refrigerator door seal from twisting?
Rub some powder around the hinge side corners of the door seal and where the seal slides. This will help to prevent the door seal from twisting as it meets the metal of the fridge.
Why do refrigerator gaskets work?
The reason this matters is because a bad or worn seal will allow cold air to leave the refrigerator, and warm air to enter it.
How to fix a gap in a door gasket?
Use petroleum jelly on the gasket to fix small gaps. Simply pull the gasket away from the channel to expose a couple of inches (.05 meter) in the door corner. Cut small strips of weather stripping. Pack the corner with it by placing it along the channel of the door gasket. Push the gasket back in the channel.
What happens if your refrigerator door leaks?
A faulty or leaking refrigerator door wastes energy, increases your energy bill, and stresses your refrigerator, shortening its life. You also risk spoiling your food. Changing the door seal (often called a gasket) may be necessary, but it's not that difficult of a process. Steps.
How to tell if you need a new gasket?
One way to tell that you need a new gasket is if your refrigerator seems to be running more frequently, or you just think it seems like it’s losing cold air. You could also inspect the door gasket for condensation or blackish mold. If you see either of those things, you probably need a new gasket because the cold air is making the water in the warm air condense. If you see cracks or thinning of the gasket, it’s also probably time for a new one.
My Repair & Advice
I ordered a new set of gaskets and filter from Appliance Pros.com. Watched a video on changing the gaskets and got it done.
My Repair & Advice
Easy. Watched the online video on AppliancePartsPros website. Gaskets came off as demonstrated and installed just as easily.
My Repair & Advice
I was able to snap the handles on myself, but had an appliance repair man put the gaskets on.
Repair Video
Step by step instructions on how to replace a Gasket WR14X10238 / AP4340413 #WR14X10238 for Refrigerator made by GE. Note: This video is intended to give you the general idea of the part replacement procedure. Your appliance may differ depending on the manufacturer and model.
Questions & Answers
I need to know if wr14x10238 is the the right part # for door gasket .
