Installing the New Bulb
- 1 Take your new bulb out of the packaging. ...
- 2 Install the bulb by inserting into headlight housing and twisting clockwise 90 degrees. ...
- 3 Return to vehicle with housing.
- 4 Reconnect harness to new bulbs. ...
- 5 Loosely place the housing to the vehicle. ...
- 6 Reinsert pins through vehicle body and headlight housing. ...
- 7 Rotate pins until they lock under tab in headlight housing.
How to install a bulb in a headlight?
How to dislodge a headlight pin?
How to remove headlamp retainer pins?
How to disconnect headlamp harness from bulb?
How to fix a headlamp that is not working?
How to remove old bulbs?
What to do if your light isn't working?
See 4 more
About this website
What size headlight does a 2011 Chevy Silverado take?
2011 Chevrolet Silverado 1500 Bulb Sizes By filtering the search results, you'll be able to determine the right low-beam and high-beam headlight bulb size for your Silverado 1500 ; 9005 bulbs for the high-beams and H11 bulbs for the low-beams.
How do you take a headlight out of a Chevy?
2:027:55How to Replace Headlights 2007-14 Chevy Silverado - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow if you flip the headlight over it'll be easier to unplug the main harness. It's got a clip rightMoreNow if you flip the headlight over it'll be easier to unplug the main harness. It's got a clip right here that you can press on. And pull that. Out. There you go. And there's your old headlight.
How do you remove a headlight assembly?
InstructionsStep 1: Remove the old headlight assembly. ... Step 2: Disconnect the assembly. ... Turn the headlamp retainer ring counter-clockwise to remove it from the headlamp. ... Step 3: Disconnect electrical. ... Step 4: Remove old assembly. ... Step 5: Replace the assembly. ... Step 6: Connect the new assembly.More items...
Do I have to take my bumper off to change my headlights on a 2011 Chevrolet Malibu?
This is a good question—it is possible to replace the headlights on a Chevy Malibu without fully removing the bumper cover, but you'll still need to loosen it, which will require a 9 or 10 mm socket wrench with an extension.
How hard is it to replace a headlight?
Fortunately, it's often easy to change a headlight. Most of today's halogen high-intensity-discharge (HID) or light-emitting-diode (LED) bulbs are simple to replace. They are held in place by thin wire clips or rotating bayonet-style retainers.
Does O'Reilly Auto Parts change headlights?
Replacing headlight bulbs is a pretty easy fix – just stop by one of our stores and grab a pair of headlight bulbs. We'll be happy to change them for you or you can give it a try yourself. Not all services offered at every location. Restrictions apply.
Can I replace my headlight assembly myself?
If you got a high quote from a shop or GM dealer for replacing your headlight assembly, we understand why you're wondering if you could do it at home. The good news is: yes, you can! If you're handy with tools and you're willing to set aside a couple hours of your time, that is.
What tools are needed to remove headlight assembly?
How To Install A Set Of Headlamp AssembliesTools needed: flat wrenches, socket wrenches, rivet gun (on certain vehicle applications), screwdriver(s), Torx head bits (if applicable), electric drill (if applicable)Tools needed: Socket wrench, screwdriver(s)More items...
What tools do I need to change headlights?
Many headlight bulbs can be removed without tools, but some do required the use of a flathead or Phillips screwdriver. If there are power wires connected to the back of the bulb, remove them. There might also be a dust cover that you need to remove from the back of the headlight.
Can plastic bumpers be repaired?
Many plastic bumper parts can be repaired, especially bumper covers, which are commonly damaged on a vehicle. By saving your bumper, the technician will also be able to blend the appended paint more efficiently and accurately.
How do you get scratches out of a plastic bumper?
How do you repair a scratch on a plastic car bumper?Step 1: Lightly rub the scratched area with 3,000 grit sandpaper. ... Step 2: Wipe down the surface with a microfiber cloth to get rid of any particles or debris.Step 3: Apply a polishing compound to the buffed area via another microfiber cloth.More items...
Are 2011 Chevy Malibu's reliable?
2011 Chevrolet Malibu Ratings Overview The average rating is a 3.9 out of 5 stars. The 2011 Chevrolet Malibu Reliability Rating is 3.5 out of 5. It ranks 20th out of 32 for all car brands. Learn more about 2011 Chevrolet Malibu Reliability Ratings.
How do you remove the headlights on a 2016 Chevy Silverado?
5:018:20How to remove headlights and grill on a 2016 to 2018 Chevy SilveradoYouTubeStart of suggested clipEnd of suggested clipSo you don't lift up on it and pull out now just gonna grab it make sure you get a hold of it. ItMoreSo you don't lift up on it and pull out now just gonna grab it make sure you get a hold of it. It comes out like that down here there's a tab that holds it in. So just kind of gotta wiggle it. Out.
How do you change a headlight on a 2000 Chevy Silverado?
1:246:26Replacing a Headlight Bulb in a 2000 Chevrolet Silverado - YouTubeYouTubeStart of suggested clipEnd of suggested clipLittle little pins and you're just gonna pull it out place mine on there. And here's the other oneMoreLittle little pins and you're just gonna pull it out place mine on there. And here's the other one then pull this one out.
How do you adjust the headlights on a 1995 Chevy truck?
0:032:55How To Adjust Headlights on a GM Truck - YouTubeYouTubeStart of suggested clipEnd of suggested clipHere you go. So that is what the assembly look like when you actually remove you from the vehicle.MoreHere you go. So that is what the assembly look like when you actually remove you from the vehicle. And you can see this one closest to the middle of the truck.
How to install a bulb in a headlight?
Install the bulb by inserting into headlight housing and twisting clockwise 90 degrees.
How to dislodge a headlight pin?
Insert between headlight housing and pin, and twist gently to dislodge pin. Pull headlight retainer pins straight up, and gently set aside in a safe location. Make sure to note which location the pin came from, as they are not interchangeable. Grasp headlight assembly and pull gently towards you.
How to remove headlamp retainer pins?
Locate two (2) dowel pins on top of the headlamp assembly. Rotate the headlamp retainer pins until they are free of the headlamp housing.
How to disconnect headlamp harness from bulb?
While holding the headlamp housing, disconnect the harness from the bulbs by squeezing the connector and pulling it straight away from the bulb.
How to fix a headlamp that is not working?
Move to the front of the vehicle. Open the hood by inserting your hand in the gap between hood and grill. Locate the lever assembly, and slide leftward slightly. You should be able to lift the hood fully upward. Locate headlamp assembly that is defective. Locate two (2) dowel pins on top of the headlamp assembly.
How to remove old bulbs?
Remove the old bulbs, by grasping the bulb and twisting counterclockwise 90 degrees.
What to do if your light isn't working?
If that doesn't work, check that there is power running to the bulb by checking the socket with a multi-meter . If it reads that there is no voltage, then the problem is with the housing unit of the light instead of the bulb. Thanks!
How much do headlights grow over time?
Headlights grow dimmer by up to 20% over time and eventually burn out - for this reason, we recommend changing your headlights in pairs. Changing both headlight bulbs on your Silverado 2500 HD at the same time will allow both bulbs to have the same intensity and prevent the new headlight bulb from appearing brighter than the bulb on ...
Is a high beam the same as a headlight?
In some Chevrolets, the highbeam is the same bulb as the headlight and it is possible for the highbeam to work, but the headlight be burnt out even if they are the same bulb (and vise versa). Some Chevrolets have high intensity discharge headlights, sometimes referred to as xenon lights.
How much do headlights grow over time?
Headlights grow dimmer by up to 20% over time and eventually burn out - for this reason, we recommend changing your headlights in pairs. Changing both headlight bulbs on your Silverado 1500 at the same time will allow both bulbs to have the same intensity and prevent the new headlight bulb from appearing brighter than the bulb on the opposite side. ...
Is a high beam the same as a headlight?
In some Chevrolets, the highbeam is the same bulb as the headlight and it is possible for the highbeam to work, but the headlight be burnt out even if they are the same bulb (and vise versa). Some Chevrolets have high intensity discharge headlights, sometimes referred to as xenon lights.
What does the bolt on the headlight do?
This bolt will adjust downward causing your headlight to lower.
How far down should headlights be?
Aim your headlights so the greatest illumination hits about 2 inches down from the horizontal line and 2 inches to the right of the vertical lines. It's recommended that you perform this DIY annually, as your headlights are prone to misalignment as time passes.
How to check for alignment of low beam lights?
Make a straight center line along the garage door or wall marking the lateral distance between your passenger side and driver's side low beam lights. Add a horizontal center line to check for complete alignment. Jump back into your vehicle, turn on the ignition and slowly back away from your garage door or wall.
Do you need a mechanic to adjust headlights on a 2015 Silverado?
You won't need a mechanic to adjust, aim or align the headlights on your Chevrolet Silverado 1500; simply use these easy-to-execute DIY instructions. By Charlie Gaston - June 5, 2015. This article applies to the Chevrolet Silverado 1500 (1999-present). It's recommended that you adjust, aim and align the headlights on your Chevrolet Silverado 1500 ...
What is the headlight panel on a 2016 Silverado?
Your Silverado’s stock headlight panel is a four-piece design, featuring a low-beam, high beam, turn signal, and fog light. Newer Silverado 1500 models (2016 to 2018) feature factory fresh LED bulbs that yield far more luminosity than its predecessors. Of course, your stock LED bulbs can still be improved with an HID conversion kit, LED Dayliner strip, or halo ring add-ons for even more visibility while driving.
What color headlights are used in a Silverado?
For that true bellicose Silverado style, consider a pair of smoky black headlight clusters. For older Silverado models, choose from clear lensed black headlight clusters with ultra-bright halo rings. For newer generation Silverados, you can accent that boxy, bold look with a blackout headlight cluster. Choose from two-piece and four-piece panels featuring long-lasting LED bulbs. All headlights feature easy plug and play installation so upgrading your Silverado takes minutes.
What are Halo Headlights?
One way to get even more luminosity out of your headlights is by installing halo rings on your existing halogen bulbs. Halo rings or corona rings are LED powered, ultra-bright rings found in many aftermarket conversion kits and headlight upgrades. They essentially intensify the light being emitted by your headlights and make them appear brighter.
What is a halo ring on a Silverado?
These rings essentially operate as a single, bright LED bulb and can be customized with color changing diodes to give your Silverado a dazzling and ultra-modern look.
What bulbs are used in 2015 Silverado?
For older generation Silverados (2007 to 2015), GM unfortunately didn't make any improvements to their factory headlight setup. Silverado low beams use an H11LL bulb, 9005LL bulbs for high beams, and 5202 bulbs for fog lights. The H11 low beam kit for these Silverado models represents the lowest quality and cheapest kit available.
How to get more luminosity out of headlights?
One way to get even more luminosity out of your headlights is by installing halo rings on your existing halogen bulbs. Halo rings or corona rings are LED powered, ultra-bright rings found in many aftermarket conversion kits and headlight upgrades.
How long do LED headlights last?
With an ultra-low operating temperature, LED headlights can run well over 50,000 hours. They are also considered some of the brightest headlights on the road, especially during the day.
How to install a bulb in a headlight?
Install the bulb by inserting into headlight housing and twisting clockwise 90 degrees.
How to dislodge a headlight pin?
Insert between headlight housing and pin, and twist gently to dislodge pin. Pull headlight retainer pins straight up, and gently set aside in a safe location. Make sure to note which location the pin came from, as they are not interchangeable. Grasp headlight assembly and pull gently towards you.
How to remove headlamp retainer pins?
Locate two (2) dowel pins on top of the headlamp assembly. Rotate the headlamp retainer pins until they are free of the headlamp housing.
How to disconnect headlamp harness from bulb?
While holding the headlamp housing, disconnect the harness from the bulbs by squeezing the connector and pulling it straight away from the bulb.
How to fix a headlamp that is not working?
Move to the front of the vehicle. Open the hood by inserting your hand in the gap between hood and grill. Locate the lever assembly, and slide leftward slightly. You should be able to lift the hood fully upward. Locate headlamp assembly that is defective. Locate two (2) dowel pins on top of the headlamp assembly.
How to remove old bulbs?
Remove the old bulbs, by grasping the bulb and twisting counterclockwise 90 degrees.
What to do if your light isn't working?
If that doesn't work, check that there is power running to the bulb by checking the socket with a multi-meter . If it reads that there is no voltage, then the problem is with the housing unit of the light instead of the bulb. Thanks!
