Steps:
- 1. Turn off the electricity to the light-fixture circuit at the main electrical panel.
- 2. Unscrew the lightbulbs from the recessed fixture.
- 3. Disconnect and remove the trim from the recessed fixture.
- 4. Screw the prewired socket adapter into the recessed fixture.
- 5. Preassemble the mounting bracket, which will support the new pendant light.
How to convert a recessed light to a pendant?
pendant light sheet metal screw Tools power drill and driver Instructions Gather all the supplies and remove the light bulb from the recessed light fixture. Open the recessed light conversion kit. Screw that into the socket. It also comes with mounting plates that you install onto the can lights.
How to convert recessed lighting into pendant lighting?
Converting a Recessed Light to a Pendant Instructions: 1. Remove the light bulb from your recessed light fixture. 2. Measure the height (from the ceiling) that you would like your pendant light to hang. (side note: Because this fixture will be over our craft table, I chose a height slightly lower than if I was installing it where we would walk ...
How to change a recessed can to a pendant light?
To Install pendant light:
- Turn off the circuit breaker- always flip the light switch off as an extra safety measure.
- Remove the existing can light and lightbulb
- Screw-in the pigtail socket
- Install the channel brace inside the opening and secure the mounting bracket.
- Attach the ground wire -sounds scary, but it isn’t, I promise!
How to replace recessed residential lights?
How to Replace the Transformer on a Low Voltage Recessed Can Light
- Turn the electricity to the recessed can light off at the circuit breaker box. ...
- Access the can light's electrical box through the attic, if possible, or from under the ceiling. ...
- Open the recessed light's electrical box with the correct screwdriver. ...
Can I replace a recessed light with a pendant light?
Transform your existing recessed lighting into a pendant or light fixture. This unique patent-pending Recessed Light Converter offers a quick and easy home upgrade with no major remodeling. Hang any pendant or other light fixture of 50 lbs. or less where recessed lighting is currently used in your home.
Can you turn a downlight into a pendant light?
If your downlights are plug-in style (with the standard 90mm cut-out) you can directly replace them with FREE Snap Lighting Universal Sockets and your choice of pendants!
How much does it cost to have pendant lights installed?
The cost of purchasing and installing a pendant light should be between about $300 and $450 per fixture, each of which should take an electrician a little under 2.5 hours to install. This price includes the fixture, labor and installation supplies.
How do I remove recessed lighting?
InstructionsTurn Off the Power. Turn off the recessed light circuit at the electric service panel. ... Remove the Bulb. ... Remove the Light Trim. ... Remove the Recessed Light Housing. ... Access Wires. ... Disconnect the Wires. ... Insert Wires in the Old-Work Box. ... Terminate the Wires in the Box.More items...•
What can I replace downlights with?
Alternative: Wall Uplighter to reflect light onto the ceiling and back down into the room. Use a desk lamp for task lighting.
Do I need an electrician to change a light fixture?
Do I need to hire an electrician to install a light fixture? Unless you have previous electrical experience, you should always hire a licensed electrician for any electrical project, including installing a light fixture.
How much do electricians charge to change a light fixture?
Light fixture replacement averages $65-$175 for labor. This will depend on the location of your light fixture and the type of replacement. The cost for the fixture itself can run anywhere from $20 for a simple option to $1,500 or more for a chandelier.
Are pendant lights easy to install?
Like recessed lights, pendant lights are also one of the easiest lighting upgrades you can make to your home. Assuming you are replacing a fixture that already used a junction box, it will only take four steps and about half an hour to install you fashionable pendant light.
How do you make a homemade pendant light?
1:372:514 Easy DIY Pendant Lights | Glam It Yourself - YouTubeYouTubeStart of suggested clipEnd of suggested clipThing is great about this you put in a Edison bulb and it casts a great shadow. We went from saladMoreThing is great about this you put in a Edison bulb and it casts a great shadow. We went from salad bowl to mason jar what else is lying around your house that you can turn into a light fixture.
Can you change down lights?
Though you can change a light bulb, and this includes replacing the bulbs in your downlights. Just be mindful of the clips and getting your fingers stuck in them. But, when it comes to installing new downlight fittings and wiring them in, it's best to give your expert Electrician To The Rescue a call.
Do converters have a weight limit?
50 PoundsHolds up to 50 Pounds!
How do I change a ceiling light?
0:081:34How to Replace Ceiling Light Fixtures For Dummies - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut no matter how a fixture is hung the wiring is simple to replace a ceiling fixture the firstMoreBut no matter how a fixture is hung the wiring is simple to replace a ceiling fixture the first thing you do is turn off the power. Next remove the light bulb cover and bulbs from the fixture.
Is there anything wrong with can lights?
Nope, there is nothing wrong with can lights.
Can you install a crossbar with a pendant?
Once the crossbar is attached, you can install the crossbar that comes with a pendant like you normally would. Connect and install the pendant or a flush mount light according to the instructions that come with it. That's it! Reader Interactions.
Can recessed lights be converted to pendant lights?
Easily convert a recessed light to a pendant light with this step by step tutorial. This is a 5-minute update to convert canned lights to a pendant.
Source Materials
Purchase a recessed-fixture converter kit, ceiling medallion and light fixture.
Select Recessed Light to Convert
Choose a location to hang new light fixture. Turn off power for this location by switching off breaker.
Remove Recessed Fixture
Remove existing recessed fixture by twisting out light bulb, turning and removing casing and releasing clips that hold recessed light shell to socket. Leave existing socket in place.
Install Recessed Fixture Converter
Follow kit instructions to install converter. Use circuit tester to ensure power is off.
Prepare New Fixture
Prepare to hang new light fixture by connecting cap to fixture with chain link. Thread wires through fixture stem at cap and ceiling medallion center.
Connect Wiring
Join wires of the converter kit to corresponding wires of new fixture, following light fixture directions.
Test Connection
Install light bulb and switch on power at breaker to test that wiring has been connected properly. Confirm and switch off breaker.
How to adjust a can light?
Take mounting bracket and remove the two 1/4″ long side screws. This will allow you to fit the bracket to the size of your can light’s width in the ceiling. Raise the brace into the can light opening. Adjust the brace to fit along each side of the opening.
How much weight can a Westinghouse chandelier hold?
This light converter can also hold the weight of a chandelier that is less than 50 pounds. So not only can you hang a small pendant, you can hang a full-size chandelier!
Can you use self piercing screws on a can?
After reading the reviews, most of the feedback was that it was difficult to get the screws through the metal edges of the can housing. There are self-piercing screws that are included with the kit. We opted to use our own self-piercing screws and we had no problems getting the screws through the metal housing.
Can you convert a recessed light to a pendant light?
I thought we would need to have an electrician come over and convert the lights to put pendant lights in. Then i found out about Westinghouse Recessed Light Converter Kit. It’s awesome because it make changing out a recessed light to a pendant light or chandelier fast and easy with NO remodeling.
What is a recessed light?
A recessed light, sometimes called a can light, has both its housing and bulb recessed above the ceiling drywall. Converting a standard ceiling light fixture to a recessed light involves removing the old fixture and its electrical box and installing the new recessed light, usually in the same place. Alternatively, you can install the new light in ...
How to restore power to a light?
Restore power to the light's circuit by turning on the circuit breaker, then test the light by turning on the light switch. If you have access to an attic space above the new fixture, cover the fixture with insulation (only if the fixture is IC-rated) to minimize the loss of room heat through the fixture.
How to connect black wire to white wire?
Typically, the black (hot) circuit wire connects to the black (hot) fixture wire, the white (neutral) circuit wire connects to the white (neutral) fixture wire, and the bare copper (ground) circuit wire connects to the bare copper or green insulated fixture wire.
How big should a hole be for a new fixture?
The hole should be no more than 1/8 inch larger (in diameter) than the canister.
How long has Lee been remodeling?
Lee has over two decades of hands-on experience remodeling, fixing, and improving homes, and has been providing home improvement advice for over 12 years.
Can you exceed the wattage of a spruce light bulb?
The Spruce / Liz Moskowitz. Make sure the light bulb does not exceed the maximum wattage rating of the fixture. With energy efficient LED or CFL bulbs, it's almost impossible to exceed the rating, but it's not so hard with incandscent or halogen bulbs, which can have high wattages and run very hot.
Can you turn off a light switch?
You cannot turn off the light switch only; this is dangerous. You must turn off the circuit breaker. Return to your ceiling work area. Turn the light on and off at the switch to confirm that it is not powered.
What kind of lights should I put under my cabinets?
I'd prefer recessed lights, a new chandy, LED's under the cabinets and less clutter on top of them.
Can you put a recessed light over a table?
No, not a recessed light over the table! Just hook up the chain when you have a party. I agree with the " less is more" idea of decorating,remove all but a few favourites.
Supplies needed to convert a recessed light to a pendant light
There are SO MANY pendant light options out there! I used mini-chandeliers, but you could also choose more traditional pendant lights, like a drum pendant light or an industrial pendant light, which are so hot right now.
Steps to convert a recessed light to a pendant light
1) Turn off the breaker for the light you will be working on. Better safe than sorry.
