Remove the support and set the mower back on its side. 26 Thread the belt onto the pulley then replace the transmission bracket and secure the screws. 27 Rotate the transmission into place and reattach the spring end of the traction cable to the transmission bracket.
When to replace the transmission on a Toro Lawn Mower?
The most common reason for replacing the transmission is when the lawn mower wheels don’t turn. All of the information in this transmission replacement video is applicable for the following brands: Toro.
How do you change a transmission on a riding lawn mower?
Now hold the transmission shaft as you set the mower back on its side. Use a half-inch wrench to secure the adjustment plate mounting nuts while you use a half-inch socket to unthread the two bolts and remove them. Slide the old transmission up, lift the plate out of the way and pull the transmission out. Be aware this may require some effort.
Why won’t my Toro Lawn Mower start?
If your Toro lawn mower won’t start, it may be the fuel. Lawn mowers aren’t meant to run on 10% or more ethanol fuel or even E85 fuel.
How do you purge the air from a Toro Lawn Mower?
Order Part No. 44-2500 from your authorized Toro distributor. Move machine to a level surface and engage the parking brake. Place all controls in the NEUTRAL position and start the engine. Run the engine at lowest possible engine speed to purge the system of air. Important: Do not run the PTO.
How do you remove a transmission from a lawn mower?
0:484:30Replacing the Transmission on a Lawn Mower - YouTubeYouTubeStart of suggested clipEnd of suggested clipPosition remove the top drive cover mounting screws. Release the height adjuster lever and pull theMorePosition remove the top drive cover mounting screws. Release the height adjuster lever and pull the drive cover. Off pull off the transmission belt keeper roll.
How does Toro Personal Pace transmission work?
1:403:04Toro Personal Pace Mower Product Overview - Ace Hardware - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow it has a drive mode it's actually driven by the rear wheels and when you have this handle hereMoreNow it has a drive mode it's actually driven by the rear wheels and when you have this handle here you can see how it moves.
How do you take a Toro lawn mower apart?
0:185:41Toro Lawn Mower Disassembly – Lawn Mower Repair Help - YouTubeYouTubeStart of suggested clipEnd of suggested clipUsing a 5/8 inch socket remove the mounting bolt and washer. Then pull off the blade adapter andMoreUsing a 5/8 inch socket remove the mounting bolt and washer. Then pull off the blade adapter and blade. Now use a half-inch socket to remove the upper bolt securing the belt guide.
How do you change the rear drive belt on a Toro Recycler 22?
2:044:33How to Change the Drive Belt on Your Toro® Lawn Mower - YouTubeYouTubeStart of suggested clipEnd of suggested clipFor most 22 inch Toro models you'll need to remove the rear baffle. And belt cover. These are heldMoreFor most 22 inch Toro models you'll need to remove the rear baffle. And belt cover. These are held by screws on the top and sides of the deck.
How do you fix a Toro Personal pace lawn mower?
0:044:23How to Troubleshoot and Repair a Toro Personal Pace Drive ...YouTubeStart of suggested clipEnd of suggested clipThe air cleaners on one side exhaust on the other you turn this side is going to always going to runMoreThe air cleaners on one side exhaust on the other you turn this side is going to always going to run into air cleaner tip on that is the proper way to do. It isn't a void on the back of the handle.
How do I adjust the speed on my Toro lawn mower?
0:001:29How to Adjust Self-Propel Lawn Mower - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe traction adjustment knob by turning it counterclockwise to increase traction pull the cable downMoreThe traction adjustment knob by turning it counterclockwise to increase traction pull the cable down toward the engine to decrease traction pull the cable up toward the handle.
How do you fix a Toro lawn mower that won't start?
0:343:49Toro Lawn Mower Won't Start - Problem Fixed. Use GumBuster by ...YouTubeStart of suggested clipEnd of suggested clipThe easiest way to troubleshoot the engine is to remove the air filter and spray a small amount ofMoreThe easiest way to troubleshoot the engine is to remove the air filter and spray a small amount of starting fluid. Straight into the carburetor.
Do push mowers have a transmission?
Mowers mostly use two types of transmissions – gear driven and hydro-static. The gear-driven type is very basic, the common manual lawn tractor transmission (the manual type usually called a gearbox) will have 5 forward gears and one reverse.
What causes a Toro lawn mower to not start?
Toro lawn mowers won't start when there is a lack of fuel or air to the engine; a bad spark plug; or a failure in the electrical system. This can be caused by blockages in the fuel system, a bad gas cap, dirty carburetor, plugged air filter, bad battery and more.
How do you change a rear drive belt on a Toro?
1:043:35Toro Lawn Mower Not Self Propelling? Replace ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipMove the guide out of the way unthread. The old belt and pull off the blade driver. Your next stepMoreMove the guide out of the way unthread. The old belt and pull off the blade driver. Your next step is to remove the bolts from the deck to release both the belt shield and the rear baffle.
How do you change the drive belt on a Toro walk behind lawn mower?
0:394:38How to Replace the Drive Belt on a Toro Walk Behind Lawn MowerYouTubeStart of suggested clipEnd of suggested clipLet's get started the first thing I need to do is remove the belt cover and it's secured fromMoreLet's get started the first thing I need to do is remove the belt cover and it's secured from underneath the mower.
Where is the model number on a Toro Recycler 22?
Toro Recycler and Super Recycler model and serial numbers are printed onto a small white label. This label is located on the rear left corner of the cutting deck.
How to remove transmission bracket?
Rotate the transmission and remove the screws to release the transmission bracket.
How to remove snap rings from transmission shaft?
Use snap-ring pliers to remove the snap rings from the transmission shaft then pull off the gears and washers.
How to tighten bolts?
Thread the nuts onto the bolts and tighten with the wrench and socket.
Can you reattach a spark plug?
With the repair complete, you can now reattach the spark plug wire and boot.
Why won't my Toro mower start?
If your Toro lawn mower won’t start, it may be the fuel. Lawn mowers aren’t meant to run on 10% or more ethanol fuel or even E85 fuel. Go to www.toro.com/fuelfacts for more information
Why is my lawn mower not starting?
Having trouble starting your lawn mower? It might be your spark plug.
When do Toro blades need to be replaced?
The blades must be replaced if a solid object is hit, if the blade is out of balance, or if the blade is bent. To ensure optimum performance and continued safety conformance of the machine, use genuine Toro replacement blades. Replacement blades made by other manufacturers may result in non-conformance with safety standards.
How long does it take to break in a new mower?
New engines take time to develop full power. Mower decks and drive systems have higher friction when new, placing additional load on the engine. Allow 40 to 50 hours of break-in time for new machines to develop full power and best performance.
How much space do you need to add gasoline to a gas tank?
Add gasoline to the fuel tank until the level is 6 to 13 mm (1/4 to 1/2 inch) below the bottom of the filler neck. This empty space in the tank allows gasoline to expand. Never smoke when handling gasoline, and stay away from an open flame or where gasoline fumes may be ignited by a spark.
Why is my grass turning brown?
Maintain sharp blades throughout the cutting season, because sharp blades cut cleanly without tearing or shredding the grass blades. Tearing and shredding turns grass brown at the edges, which slows growth, and increases the chance of disease.
What is an engine owner's manual?
The enclosed Engine Owner's Manual is supplied for information regarding the US Environmental Protection Agency (EPA) and the California Emission Control Regulation of emission systems, maintenance, and warranty. Replacements may be ordered through the engine manufacturer.
Can children be on towed equipment?
Use counterweights or wheel weights as described in the attachment, or in the pulling machine Operator’s Manual. Never allow children or others in or on towed equipment. On slopes, the weight of the towed equipment may cause loss of traction, increased risk of rollover, and loss of control.
Can you mow near drop offs?
Do not mow near drop-offs, ditches, steep banks or water. Wheels dropping over edges can cause rollovers, which may result in serious injury, death or drowning. Use a walk behind mower and/or a hand trimmer near drop-offs, ditches, steep banks or water.
When does a car move?
moving whenever the engine is running or has the
Can Toro change product specifications?
The Toro Company reserves the right to change product specifications or this manual without notice.
Can you remove the fuel cap and add fuel?
oil immediately. Never remove the fuel cap or add fuel
When to adjust service brakes?
Adjust the service brakes when there is more than 25 mm (1 inch) of free travel of the brake pedals or when the brakes do not work effectively. Free travel is the distance that the brake pedal moves before you feel braking resistance.
How to avoid rollover accident?
To avoid injury or death from a rollover accident, keep the roll bar in the raised and locked position and wear the seat belt. Lower the roll bar only when absolutely necessary; do not wear the seat belt when the roll bar is down. Read the Operator's Manual; drive slowly and carefully. 119-4832. Fast.
How does a lift switch work?
The lift switch (Figure 20 ) raises and lowers the deck. Pressing the switch forward, into the DETENT position, lowers the deck and allows the deck to float. Pressing the switch backward raises the deck. Raise the deck whenever you transport the machine between locations. Lower the deck whenever you are not using the machine.
Do you need to bleed fuel system?
Important: You might need to bleed the fuel system in any of the following situations: initially starting up a new machine, the engine no longer running due to lack of fuel, or fuel system components replaced or serviced.
