Thread the new drive belt around the engine pulley, then under the idler pulley and finally around the rotor pulley, which should be positioned just above the rotor shaft. Reinstall the rotor pulley on the shaft and secure it with the curved washer and screw. Reattach the brakes spring to the idler arm. This will put the new belt under tension.
How do I change the belt on my snowblower?
1:484:10How to Replace a Snowblower Auger Belt - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse a clamp to hold the drive lever to the handlebar. Remove the old belt from around the augerMoreUse a clamp to hold the drive lever to the handlebar. Remove the old belt from around the auger pulley and slip the belt between the support bracket and the auger pulley.
How often should you change snowblower belts?
Snowblower belts start to wear out after 5 to 7 years, and should be replaced.
Are Toro Single Stage snow blowers good?
0:191:35Toro Single-Stage Snow Blowers 2018 - YouTubeYouTubeStart of suggested clipEnd of suggested clipFeatures that have made Toro the technology leader for over 60 years and the number one brand forMoreFeatures that have made Toro the technology leader for over 60 years and the number one brand for single stage snow blowers in the US.
Why does my Toro snowblower not throw snow?
If the blades get worn they will not effectively throw the snow. Visually inspect the blades for excessive wear and replace if needed. Inspect the belt to see if it is broken, stretched out, or out of place. If the cogged belt is broken or stretched out, replace it.
What are the 2 belts on snowblower?
For most two stage snow blowers, there are 2 or 3 belts under the cover. One belt will drive the auger, and the other will drive the wheels.
How do I know if my snowblower belt is bad?
0:533:00HOW TO Check The Belts On Your Snowblower - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere's three belts this belt here is for the drive it drives the wheels a good way to check thisMoreThere's three belts this belt here is for the drive it drives the wheels a good way to check this belt this is just by turning the engine over slowly. And the belts going to do a full revolution.
Which is better single stage or two stage snow blower?
For smooth surfaces, both single-stage and two-stage snow thrower works great; clearing the snow down to the pavement. However, if you have gravel drive and walkways, a two-stage snow thrower is ideal as you can set the height of the skid shoes to the right clearing height for you.
What is the difference between a Stage 1 and Stage 2 snowblower?
Single-Stage Models: The auger both pulls up and discharges the snow. The snow discharge distance is usually limited to about 36 inches. Because the auger touches the ground, it is covered in rubber to protect the surface. Two-Stage Models: The auger only pulls up the snow from the ground.
How much snow can a single stage snow blower handle?
Single-stage snow blowers typically max out at a depth of 6 to 9 inches, and even the strongest machines will struggle when snow is more than 16 inches deep.
What can I spray on my snowblower to keep the snow from sticking?
BEST OVERALL: DuPont Teflon Non-Stick Dry-Film Lubricant.RUNNER-UP: Liquid Wrench M914 Silicone Spray – 11 oz.BEST BANG FOR THE BUCK: DuPont Teflon Snow and Ice Repellant.BEST HEAVY DUTY: CRC Heavy Duty Silicone Lubricant, 11 Wt Oz.ALSO CONSIDER: WD-40 Specialist Water Resistant Silicone Lubricant.
Should a snowblower auger be turned by hand?
The main symptom is a free-spinning auger. Go ahead a place your hand on each auger in turn, they may move slightly, that's normal but should not be free to spin.
Why does my snowblower start but not keep running?
If the carburetor is clogged, try cleaning it with carburetor cleaner. If cleaning the carburetor isn't effective, rebuild or replace the entire carburetor. The carburetor might be clogged. A clogged carburetor is most commonly caused by leaving fuel in the snowblower for a long period of time.
How many years does a snowblower last?
Snow blowers can last several years, even decades, if they're maintained regularly and correctly. Snow blower maintenance varies based on the type of snow blower you have, either a two stage snow blower or a single stage snow blower.
How tight should a snowblower belt be?
2:335:52How to adjust auger drive belt sears craftsman snow thrower - YouTubeYouTubeStart of suggested clipEnd of suggested clipDown you should feel good tension right about here. You know all the way down here should just beMoreDown you should feel good tension right about here. You know all the way down here should just be spring tension you feel the spring.
Do I need to change snowblower oil every year?
Over time, the heat, dirt and agitated air in your engine's crankcase can make the oil dark and dirty. Older oil loses the ability to coat and protect vital engine parts. That's why Toro recommends changing the engine oil at least once a year, and after the first two hours on new snow blowers.
Why does my snowblower not throw snow far?
A clogged chute won't throw snow very far. If the chute isn't clogged, check the augers and auger drive system. A damaged auger blade can't push snow through the shoot, and broken shear pins keep sections of the auger from spinning.
Can you replace a Toro drive belt?
Now that the old belt is out of the way, you can replace it with a new one. Be sure to use the right drive belt for your machine. You can find exactly what you need at Toro.com through your local Toro dealer.
Do you need to replace a snow blower drive belt?
If your single-stage snow blower doesn’t seem to have the power that it used to, you might need to replace the drive belt. Drive belts can become worn or loosen up over time, so they need to be replaced periodically. This procedure is also covered in your owner’s manual.
Can you add videos to your watch history?
Videos you watch may be added to the TV's watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. An error occurred while retrieving sharing information. Please try again later.
What does a drive belt do on a snowblower?
The drive belt engages the auger paddles, allowing them to rapidly spin and throw snow out of the discharge chute. If the belt begins to show signs of cracking, or it breaks while operating, replace it immediately. You don’t wont to get stuck in the next snow storm with a snowblower that won’t clear snow.
What to do before servicing a Jack's Power?
Jack’s Safety Tips: Before servicing or repairing any power equipment, disconnect the spark plug and battery cables. Remember to wear appropriate safety glasses and gloves to protect against harmful chemicals and debris. View our Disclaimer.
Who is Turner Anderson?
Turner Anderson is the Internet Marketing Manager at Jack's and the editor of Jack's DIY Center. You'll also find him creating How-To articles, videos, newsletters, and much more.
Can you add videos to your watch history?
Videos you watch may be added to the TV's watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.
What to do if playback doesn't begin?
If playback doesn't begin shortly, try restarting your device.
Is it safe to use a snow blower when clearing snow?
Snow blower safety is key when clearing snow. Follow these tips and operating instructions each time you use your snowblower for a safe experience.
Do Toro snowblowers use shear pins?
Toro two-stage snowblowers do not use shear pins. The commercial-grade gear case makes the need for a shear pin unnecessary. If the auger hits an obstruction or is over-loaded with snow, the engine may shut off, so that you can remove the key, clear the obstruction safely with a stick and get back to work. YouTube.
Do you need to change oil on a Toro snow blower?
Changing the engine oil of any type of snow blower is an essential maintenance task, especially if you own a Toro Single-Stage Snow Blower. The older your oil is, the more difficult it becomes to protect all the vital parts of your snow blower’s engine.
Can you put a Toro snowblower away?
Once the winter is over, it’s time to finally put your Toro snowblower to rest. But before you put away your machine, there are plenty of things you can do to improve and maintain the maintenance of your snowblower, so it’s all ready to go next winter. From properly emptying your fuel system to inspecting your rotor blades, scraper and cables, here’s a quick video tutorial on how to store away your snowblower at the end of snow season.
Does Toro have a snowblower?
No matter what your snow removal needs are, Toro has the lineup of snowblowers that will help you make the best purchase possible. Whether you’re looking for a machine that’s designed for heavy duty snow removal or something that’s more maneuverable and lightweight, we guarantee that you’ll find the right type of snowblower you’ve been searching for. Take a look at our versatile lineup of snowblowers to help you get through this winter, and many more to come.
Why adjust control cable on snow blower?
Once everything’s assembled, you need to adjust the control cable. This is important because improper adjustment can really affect your snow blower’s performance.
Can you add Toro Premium Fuel Treatment to your fuel?
Okay now you’re ready to test your new snow blower. Be sure to add Toro Premium Fuel Treatment to your fuel before you fuel up and only use the bare minimum of fuel for your test run. This is important because fuel can deteriorate over time and cause complications. Make sure your tank is dry when you store it so your snow blower will be ready to start right up when you need it most.
