Instructions
- 01. Shut off the power Unplug the dryer and shut off the gas.
- 02. Remove the top panel Slide the dryer away from the wall. ...
- 03. Remove the electronic control board ...
- 04. Attach the new electronic control board ...
- 05. Connect the wires ...
- 06. Reinstall the top panel ...
- 07. Restore the power
How do you remove the front panel on a GE dryer?
After you disconnect the wires, the front panel is now safely removed. Once you remove the GE dryer front panel, you can access some of the internal components at the back of the panel. You can see the upper bearing assembly with drum glides that you can replace if needed. Around the front, you will find the lower felt seal.
How do I unlock the controls on my Kenmore Elite dryer?
To lock and unlock the dryer controls: Press and hold the Extended Tumble and - (minus) buttons for 3 seconds. The control lock icon will flash while locking/unlocking, stay on when locked, and turn off when unlocked. NOTE: The Power button can still be used when the machine is locked.
What is the difference between GeGe dryer and plastic dryer?
GE dryers come with a rear console. The older models have a metal console, whereas, in the latest models, plastic has replaced the metal. That said, the disassembly process for both the metal and plastic backsplash is pretty much the same.
How do I lock/unlock the dryer for children?
Children cannot accidentally start the dryer by touching buttons with this option selected. Press and hold the Extended Tumble and - (minus) buttons for 3 seconds. The control lock icon will flash while locking/unlocking, stay on when locked, and turn off when unlocked. NOTE: The Power button can still be used when the machine is locked.
How do you remove the dryer control panel?
0:243:19Whirlpool Electric Dryer Control Panel Assembly #WPW10639903YouTubeStart of suggested clipEnd of suggested clipUse a 5/16 inch socket or nut driver to unthread the rear screws securing the top panel. Slide theMoreUse a 5/16 inch socket or nut driver to unthread the rear screws securing the top panel. Slide the top panel back and lift up to detach.
How do you remove the front panel of a GE dryer?
0:253:19GE Dryer Disassembly - YouTubeYouTubeStart of suggested clipEnd of suggested clipTop carefully unhook the control panel tabs from the main. Top then lift up the top and removeMoreTop carefully unhook the control panel tabs from the main. Top then lift up the top and remove uninstall the screws securing the front panel.
How do I fix the Start button on my GE dryer?
0:292:18Replacing Your GE Dryer's Push To Start Button AP3965177 PS1482199YouTubeStart of suggested clipEnd of suggested clipYou can use a screwdriver for some leverage. So we're gonna use a flathead screwdriver. And just pryMoreYou can use a screwdriver for some leverage. So we're gonna use a flathead screwdriver. And just pry it off nice and gentle so we do not scratch the paint or anything. It.
How do I change the switch on my GE dryer?
0:412:52GE Dryer Door Switch Replacement, Repair #WE4M415 - YouTubeYouTubeStart of suggested clipEnd of suggested clipTop carefully unhook the control panel tabs from the main. Top. Then lift up the top and removeMoreTop carefully unhook the control panel tabs from the main. Top. Then lift up the top and remove uninstall the screws securing the front panel. Lift the front panel up to remove.
How do you take a GE dryer apart?
0:416:21How to Take Apart a GE Dryer - YouTubeYouTubeStart of suggested clipEnd of suggested clipDown this style you just undo those two screws. And remove. Them. Once you remove the screws. YouMoreDown this style you just undo those two screws. And remove. Them. Once you remove the screws. You just pop this at the top from the corners. And pull it straight up.
What model is my GE dryer?
Find Your GE Dryer Model & Serial Numbers Inside front face of the dryer compartment, on the left or right side (door open).
When I press the start button on my dryer nothing happens?
A broken power cord, failed push-to-start switch or a bad timer can also prevent the dryer from starting. Some dryers use a motor relay to control the drive motor, so a broken motor relay can prevent the dryer from starting.
What would cause a GE dryer not to start?
Check the Power Source A loose or burned power cord will cause similar problems. Similarly, checking the fuse in the plug is a key step that could save you a lot of time and hassle. The GE dryer needs two legs of 120V. It is possible that one of them has been tripped.
What is wrong with my dryer it wont turn on?
There are many things that could be the culprit for why your dryer won't start, including a bad thermal fuse; a failed start switch or door switch; a bad drive motor (what makes the dryer's drum turn and the blower wheel to work); a broken drive belt; a bad timer; a bad belt switch; a blown control board; or overall ...
How do you replace a dryer switch?
0:261:30How to Replace a Whirlpool Electric Dryer Door Switch - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse a slot screwdriver to release the locking tab on the wire harness plug for the door switchMoreUse a slot screwdriver to release the locking tab on the wire harness plug for the door switch remove the mounting screws from the existing door switch. Pull the door switch out of the dryer.
How do you check the start switch on a GE dryer?
1:141:56Dryer Won't Start? Two Terminal Switch Testing, Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou begin make sure the switch you're testing has been removed or isolated from the appliance use aMoreYou begin make sure the switch you're testing has been removed or isolated from the appliance use a probe to touch one of the switches terminals and the second probe to touch the other terminal.
How do you bypass the door switch on a GE dryer?
2:044:05See how to check & replace the door switch in a GE electric or gas dryerYouTubeStart of suggested clipEnd of suggested clipThis is the jumper wire we're gonna use to bypass the door switch connect the jumper wire to the twoMoreThis is the jumper wire we're gonna use to bypass the door switch connect the jumper wire to the two wires of the door switch. Like this use electrical tape to insulate the connections.
How do I remove the lint trap on my GE dryer?
3:148:38GE Dryer Repair – How to replace the Lint Trap Duct Assembly - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere's a little tab that slides into a slot on the edge of the front panel.MoreThere's a little tab that slides into a slot on the edge of the front panel.
How do you fix a squeaky GE dryer?
2:353:11Quick Fix: how to find squeak, GE dryer - YouTubeYouTubeStart of suggested clipEnd of suggested clipI hear a little noise so i'm just gonna. Yes it's way better. Okay so basically put a leg right kneeMoreI hear a little noise so i'm just gonna. Yes it's way better. Okay so basically put a leg right knee right here in the hand here and squeeze. And that thing will just move i'll just adjust it.
How do you remove the drum from a GE dryer?
2:015:00WE21X20566 - Replacing a GE Dryer Drum - YouTubeYouTubeStart of suggested clipEnd of suggested clipPick it up right it right out once you have your new drum you can begin replacing your drum. You canMorePick it up right it right out once you have your new drum you can begin replacing your drum. You can reinstall in it first put it on your drum. Like so make sure the lines are facedown.
Why is my GE dryer not getting hot?
Clogged Vents and Lint Filter If your GE dryer is not heating, the first thing to check is the lint filter and vent. If the vent is blocked, your dryer may still produce heat, yet it will take a significant amount of time to dry clothes. A clogged vent can prevent the necessary airflow to create heat.
Where is the control panel on a GE dryer?
Different GE dryer models will have different types of screws securing the control panel to the appliance housing. Locate the screws on the top edge of the control panel and remove them with the help of a screwdriver.
How to disconnect a GE dryer?
Thus, step one is to disconnect the power by unplugging the GE dryer. You can also disconnect the power by flipping the circuit breaker. This step is crucial, or you will be at risk of shorting the heating element.
How do you clean the lint filter in a GE front load dryer?
To clean the filter after each load, grab it from the front of the dryer and pull it up. Then, with moistened fingers, wipe downward, all the way to across the filter. Periodically, you should wash the lint filter using warm water and mild soap until you remove all the residue.
How to remove a blower wheel?
Unscrew the blower wheel and the clamp securing the motor to its housing. Then , with the loosened clamp on the back of the motor, pull it out.
How to remove top of dryer on GE dryer?
To detach the top, open the GE dryer door and unfasten the screws that face upward. With the screws removed, lift the front edge of the top .
How to loosen a belt on a sandbox?
Slide both hands under the drum through the opposite gaps. Then, with both hands, pull the idler pulley to loosen and release the belt.
How to lift a drum on a door switch?
Therefore, you will have to lift the drum as you maneuver it free, gently. Once the weight of the drum is off, the front panel will tilt forward. Take care with the door switch wire harness as you pull the panel towards you. Then, with the panel tilted forward, pull up to release it from the square holes at the bottom that attach it to the cabinet.
