How to Replace the Line on a Stihl FS 55
- 1. Place the Stihl FS 55 trimmer on a level surface. ...
- 2. Hold the body of the trimmer head with one hand. ...
- 3. Press down on the spool and rotate slightly to the left then pull it straight off the trimmer head.
- 4. Cut 2 lengths of .095 inch diameter line that are 13 feet. ...
How to replace the line on a Stihl FS 55 Trimmer?
How to Replace the Line on a Stihl FS 55. Place the Stihl FS 55 trimmer on a level surface. Allow the trimmer to cool if it has been operated. Remove the spark plug wire from the spark plug. Hold the body of the trimmer head with one hand. Rotate the head to locate one of the two tab connection ...
How do you put new line on a Stihl trimmer head?
Loading new line in the Autocut trimmer head first involves accessing the spool inside the trimmer head. Place the Stihl FS 55 trimmer on a level surface. Hold the body of the trimmer head with one hand. Press down on the spool and rotate slightly to the left then pull it straight off the trimmer head.
What are the different types of Stihl trimmer heads?
For instructions on how to spool four of our most popular STIHL trimmer heads — AutoCut®, AutoCut® C (EasySpool™), STIHL FixCut™ and STIHL TrimCut™ — please click the link below. NOTE: Not all STIHL trimmer line is compatible with your STIHL trimmer head.
How do you unwind a Stihl fishing reel?
Unwind 19 feet 8 inches (3 meters) of 0.095-inch-diameter (2.4-millimeter) monofilament line from a reel containing Stihl replacement line. Double the line and use side cutters to cut it into two equal lengths.
What is a FS55 straight shaft trimmer?
How to cut trimmer line?
How to remove a spool from a spool trimmer?
How to remove the cover from a spherical trimmer?
How to put a spool in a trimmer?
See 2 more
About this website
How do you remove the head on a Stihl FS 55?
0:402:24Stihl Line Trimmer- How to Quickly Exchange the Head in 20 seconds.YouTubeStart of suggested clipEnd of suggested clipAnd you put the nail in the hole. And just start spinning that counterclockwise right there i feltMoreAnd you put the nail in the hole. And just start spinning that counterclockwise right there i felt the nail push down and lock like i'll show you again they're locked.
How do you change a string on a Stihl weedeater?
5:566:41Stihl Trimmer Line Replacement - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst make sure that the arrows and the spool housing. And the spool are aligned then firmly insertMoreFirst make sure that the arrows and the spool housing. And the spool are aligned then firmly insert the end of the line into the outlet hole as far as you can approximately two inches repeat.
How do you replace a Stihl line?
1:433:39How To Replace Your String Trimmer Line | Stihl Trimmer - YouTubeYouTubeStart of suggested clipEnd of suggested clipKind of twist it in your hand like so. And then just split up if you hold it like that I find it theMoreKind of twist it in your hand like so. And then just split up if you hold it like that I find it the easiest way just to twist this the spool itself and wind it up um.
How do I reline my Stihl trimmer?
1:062:43How to replace reload string on SKIL 40V trimmer - YouTubeYouTubeStart of suggested clipEnd of suggested clipPart and spin it that way so it's the same thing hold one spin the other. Just do that. Okay and youMorePart and spin it that way so it's the same thing hold one spin the other. Just do that. Okay and you're gonna spin it until it's about the the length of that cutter right there.
How do you put trimmer line on?
0:121:28String Trimmer Line Installation Instructions - YouTubeYouTubeStart of suggested clipEnd of suggested clipFind the two holes on top of the inner reel. And insert both ends of the line into one of the holes.MoreFind the two holes on top of the inner reel. And insert both ends of the line into one of the holes. Pull. The line through. Until two to three inches. Remain.
How do you refill a Stihl trimmer spool?
0:211:13How to refill your Linetrimmers with new trimmer cord - YouTubeYouTubeStart of suggested clipEnd of suggested clipSide refit the spool into the head and position the new line to align with the eyelets. Once theMoreSide refit the spool into the head and position the new line to align with the eyelets. Once the line has been pulled through both sides refit the cover and you're ready for work again.
How do you change the line on a Stihl FS 56 RC?
2:304:39Replacing String Trimmer Line - YouTubeYouTubeStart of suggested clipEnd of suggested clipTake the end of the line that I'm holding and push the line into the slot on the housing. Next I'llMoreTake the end of the line that I'm holding and push the line into the slot on the housing. Next I'll unclip the second line from the notch and push it into the slot on the other side of the housing.
How do you restring a Stihl FSA 56 trimmer?
0:001:31Replacing AutoCut® 2-2 Trimmer Line on FSA 56 - YouTubeYouTubeStart of suggested clipEnd of suggested clipClean the mowing head of any grass dirt or debris. Then with your new autocad. - - - pre-round spoolMoreClean the mowing head of any grass dirt or debris. Then with your new autocad. - - - pre-round spool feed the lines through the two eyelets on the mowing head and push the spool into the head.
Why does my trimmer line not feed?
0:051:22Top Reasons String Trimmer Line Not Feeding - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe trimmer line itself could be the wrong size for your trimmer or stuck in the trimmer. Head lineMoreThe trimmer line itself could be the wrong size for your trimmer or stuck in the trimmer. Head line that is too thick or too thin for the trimmer head won't feed properly.
How do you restring a Stihl FS 50 C?
1:242:40How to Easily Refill a Stihl FS-50 C E Trimmer With an Autocut C5-2 ...YouTubeStart of suggested clipEnd of suggested clipAll you got to do is take one of each end make sure they're not tangled. Line up there are fourMoreAll you got to do is take one of each end make sure they're not tangled. Line up there are four slots on here you got to line up the arrows on the side. So line that up.
How do you put string in a Stihl fs40c?
3:0111:22Trimmer Line Replacement — STIHL FS 40C Bump Feed - YouTubeYouTubeStart of suggested clipEnd of suggested clipSure we start on the top push it in straight. And then pull back against. And don't wrap too tightMoreSure we start on the top push it in straight. And then pull back against. And don't wrap too tight just pull back firmly. And kind of loosely.
What size line does my Stihl trimmer use?
Stihl Trimmer Head Specifications The standard string for the TrimCut head is 0.105 inches in diameter, but you can install 0.095-inch string on this head.
How do you change the string on a Stihl weedeater FS 38?
0:324:51Stihl Trimmer Line Replacement - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou'll notice there's a spring in there so just hold on to this part unscrew this now what you needMoreYou'll notice there's a spring in there so just hold on to this part unscrew this now what you need to do is remove this part with the string.
How do you change the line on a Stihl FS 38?
0:224:32Stihl FS 38 trimmer line how to re spool. - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis one's uh fs38. The bottom of these ones there's a little cap you unscrew that take that unitMoreThis one's uh fs38. The bottom of these ones there's a little cap you unscrew that take that unit off you're gonna do that right now. So you will come off like this. Inside there's a spring.
How do you restring a Stihl FS 38?
2:574:57How to refill a STIHL FS38 Auto Cut 11-2 - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you want to thread the line through the eyelets. This one here just take your time. Then youMoreAnd you want to thread the line through the eyelets. This one here just take your time. Then you want to turn the spool. So the locating tabs are actually facing or in line with the eyelets.
How do you change the string on a Stihl FS 40c?
0:093:07HOW TO Replace STIHL Grass Trimmer Line - YouTubeYouTubeStart of suggested clipEnd of suggested clipWith this part here facing you so start on the far edge insert the line in the small hole then rollMoreWith this part here facing you so start on the far edge insert the line in the small hole then roll it in clockwise. Try to roll it in two rows.
How To Change The Line On The Trimmer Stihl Fs55
One groove. both tendrils are wound together in one groove; Two grooves. each tendril is wound on an individual groove. For both cases, a line with a length of 2-3 m is taken.In single-groove reels, the line is pulled into a through hole, its ends (antennae) are folded together and aligned, after which they are wound in the opposite direction of rotation of the bobbin on the rod side. inside ...
How to Replace a Starter Rope in a Stihl FS 55 Trimmer
The starter rope on a Stihl FS 55 trimmer connects the engine and the flywheel, allowing you to fire the spark plug and make cold and warm starts. According to the Stihl FS 55 trimmer service manual, "if the action of the starter rope becomes very stiff and the rope rewinds very slowly or not ...
How to Wind, Feed & Replace String Trimmer Line | STIHL USA
Get step-by-step instructions on replacing line in your STIHL trimmer head — right from the source. Before you begin any maintenance on your equipment, make sure the equipment is completely powered off and thoroughly cleaned of dirt and debris.
Where is the end of a spool inserted?
One end of the line is inserted into the fixing technological hole located inside the spool.
Why does my mower cord run out?
Basically, the cord runs out quickly if you hit the ground frequently with the semi-automatic head or press it down hard. The spool is unlocked, and the line, lengthening, is cut with a knife. Another reason that the cord runs out quickly is improper operation of the machine with an automatic head: the user often cuts the engine speed when mowing. But as we remember, the automatic head is designed in such a way that it is with each decrease in revolutions that a new portion of the line is supplied, so it is quickly consumed.
What is a grass mowing head?
The grass mowing head is a cylindrical body in which a spool (bobbin) is inserted with a fishing line (cord) tucked in it. This design can be installed on both gasoline and electric trimmers. The heads differ in the way of threading and feeding the cord and are of 3 types.
How thick is a cord for grass trimmer?
Depending on which trimmer model is used, the type, thickness and length of the line are selected. The diameter of the cord can be from 1.2 to 4 mm. It is not difficult to guess that the thicker you fill the cord, the harder and thicker grass it is able to cut.
How many pieces of yarn can you charge on a reel?
Some reels have a second method of securing the cord: you can charge 2 pieces of yarn instead of one folded in half. The line is replaced according to the following algorithm.
Do factory trimmers need line replacement?
The warranty production of the factory trimmer refueling will inevitably require line replacement. Having a very rough idea of how to thread the line into the trimmer reel on their own, beginners are reluctant to take up this business. However, with some skills, mastering this simple teaching does not present any difficulties, and the similar instruction presented below will make this process as easy as possible.
What is a Stihl FS 55?
The Stihl FS 55 line trimmer is fitted with two durable monofilament nylon cutting lines capable of slicing through thick grass and thin twigs. After striking the ground, curb, stones and rocks, however, the ends of the lines tend to break off. Although fresh line is constantly fed through the spool’s eyelets to maintain the ideal cutting length, the spool eventually runs out, and the line must be replaced.
How to stop a trimmer head from turning?
Insert a metal pin, such as a suitably sized nail, into the hole near the top of the gearbox above the trimmer head; this will prevent the drive shaft from turning. Gently twist the trimmer head clockwise and slide it off the drive shaft.
How to insert a spool into a cutting head?
Insert the spool into the cutting head casing and rotate the spool until both lines point toward the line feed slots on the rim of the cutting head. Pull both lines taut and insert them into their respective feed slots.
How to remove a trimmer head?
Depress the two oval buttons on opposite sides of the trimmer head and withdraw the domed cap covering the spool. Lift the spool out of the cutting head casing, unwind any remaining line from around the dual pulleys, and discard the remaining pieces.
How long is a 0.095 inch line?
Unwind 19 feet 8 inches (3 meters) of 0.095-inch-diameter (2.4-millimeter) monofilament line from a reel containing Stihl replacement line. Double the line and use side cutters to cut it into two equal lengths.
Why keep a spare spool loaded with new string in your workshop?
Keep a spare spool loaded with new string in your workshop to reduce down time during field replacement.
What is a FS55 straight shaft trimmer?
The Stihl FS55 straight shaft trimmer comes standard with the Stihl Autocut dual line trimmer head from the manufacturer. The nylon line loaded on the spool in the trimmer head is designed to cut grass and weeds in residential and commercial applications. The line is worn down by normal use and will need to be replaced on an ongoing basis. Loading new line in the Autocut trimmer head first involves accessing the spool inside the trimmer head.
How to cut trimmer line?
Insert the end of one 13-foot length of line into one hole. Wind the line around the spool in the direction of the angle. Wind the line tightly and evenly without overlapping .
How to remove a spool from a spool trimmer?
Press down on the spool and rotate slightly to the left then pull it straight off the trimmer head.
How to remove the cover from a spherical trimmer?
Hold the body of the trimmer head with one hand. Rotate the head to locate one of the two tab connection points on the trimmer head. Press the tab in with the thumb on your other hand, rotate the head and press in the other tab. Pull the cover from the trimmer head.
How to put a spool in a trimmer?
Place the spool in the trimmer head with the side notches along side the line eyelets on the head. Push down slightly and rotate to lock it in place. Pull the line to release it from the notch and place it in the eyelet on both sides of the trimmer head.
