How to Replace Your GE Refrigerator’s Main Control Board
- 1. Unplug the refrigerator. Before you start any appliance repair, always unplug the appliance. This step is even more important when you need to handle electric components and wiring.
- 2. Remove the old control board. First, remove the rectangular rear panel by loosening the two bolts and sliding the panel down. ...
- 3. Install the new main control board.
How do I get a GE Main Control Board for my Refrigerator?
First, you’ll want to get the model number from the inside of your refrigerator. Then visit the GE Main Control Board page on amazon and enter it into the “make sure this fits” field to ensure it is compatible. If not it’ll give you a few other control board options so you should test those as well.
How do you replace the Control Board on a side by side refrigerator?
To replace the main control board for your Side-by-Side refrigerator, you will need to have access to the rear of the refrigerator where the main control board is located. Once you are behind the refrigerator, for safety unplug the refrigerator before you replace the control board.
What is the motherboard on a GE refrigerator?
The motherboard (also known as main board) controls everything so, theoretically everything that fails on a GE electronic refrigerator can be caused by the motherboard. The trick is to determine if the problem is the board or something else.
Do GE refrigerators have different controls for freezer and fridge?
One of the good features of GE refrigerators is that there are close similarities in their mode of operations, irrespective of the model. The older models have analog temperature controls. They are built in such a way that there are some with two different controls for the fridge and the freezer while some have one control for both.
How do I replace the main control board on my GE refrigerator?
1:144:10How To: GE Control Board WR55X10942P - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse a small flat blade screwdriver to separate the connector for the ground. Wire. Then remove theMoreUse a small flat blade screwdriver to separate the connector for the ground. Wire. Then remove the two other wiring harness connections at the bottom of the main control.
How much does it cost to replace a main board in a refrigerator?
between $500 and $800This makes it one of the most expensive parts of a refrigerator to fix. If the refrigerator has stopped working suddenly, it may have something to do with the control board. Replacing the control board can cost between $500 and $800. Expect to pay more if you have a high-end refrigerator.
How do I reset my GE refrigerator control board?
Try resetting the control panel by turning off power to the refrigerator briefly. Unplug the refrigerator or turn it off at the circuit breaker for 30 seconds to reset the control. Replace the filter. Purchase a GE Appliance Part online.
How do you replace a refrigerator control board?
0:001:32How to replace an electronic control board on the back of a refrigeratorYouTubeStart of suggested clipEnd of suggested clipBoard position the cover over the control board compartment and line up the screw holes insert theMoreBoard position the cover over the control board compartment and line up the screw holes insert the screws. And tighten them firmly restore electrical.
How long do GE refrigerators last?
between 10 and 20 yearsMost refrigerators are designed to last between 10 and 20 years.
Is it worth getting my fridge repaired?
But, as a good rule of thumb, if you have multiple faulty parts or if your refrigerator is over ten years old, it is probably time to replace it. Consumer Reports recommends replacing your refrigerator if the cost to repair it is more than half the price of buying a new one.
Does a GE refrigerator have a reset button?
Is there a reset button on a GE refrigerator? There is no reset button on a GE refrigerator. You have to unplug the unit for at least 30 seconds to reset it. If the problem persists, turn OFF the freezer's shut-off switch for 30 seconds, and push the ice maker's shut-off arm up and down three times.
How do you test a refrigerator control board?
How Do You Test A Refrigerator Control Board? You can test a refrigerator control board by using a multimeter. With the multimeter, you can perform electrical continuity and voltage tests on the control board to see if it's still functioning correctly.
How do you reset a GE double door refrigerator?
0:276:48GE Refrigerator Diagnostic Mode and Troubleshooting in 2021 ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipTemperature up button and the freezer temperature. Button down simultaneously. And hold it for threeMoreTemperature up button and the freezer temperature. Button down simultaneously. And hold it for three seconds. And when you activate it this is all you hear yep there's no indication that your
Where is the main control board GE refrigerator?
Location. Main control board is only accessible via rear panel of your refrigerator. Model PFCF1NFW main control board is located on the lower right side.
How do you know if your control board is bad?
Use some tape to keep the switch pressed down. If your control board has 120 volts AC going into it, then it has power. If your control board has power, but it's diagnostic light is not on, then the control board is likely bad and needs to be replaced. NOTE: You'll need a multimeter to test for power in your furnace.
What does a refrigerator main control board do?
The control board is essentially the Brain of the refrigerator and collects sensory input from numerous sensors in the freezer/food section, the run time of the compressor, the amount of times the doors have been open, the Fans, and so forth.
How much does it cost to fix a refrigerator that is not cooling?
This is not always the case but it also is not that uncommon. If and when a fridge compressor fails the pricing can be between $500 to even $1000 to fix, the same goes for if the refrigerator's seal system fails (the coolant circulation).
What does the motherboard in a refrigerator do?
The main control board is like your fridge's brain, controlling the appliance's components and functions. When the board goes bad, the fridge will experience problems with cooling, defrosting, and the water dispenser and ice maker.
What does a refrigerator control board do?
The control board is essentially the Brain of the refrigerator and collects sensory input from numerous sensors in the freezer/food section, the run time of the compressor, the amount of times the doors have been open, the Fans, and so forth.
How do you replace the control board on a Frigidaire refrigerator?
0:392:40Frigidaire Refrigerator Replace Main Control Board 5304502779YouTubeStart of suggested clipEnd of suggested clipNow use a large flat-head screwdriver to pry the control board housing down then pull the housingMoreNow use a large flat-head screwdriver to pry the control board housing down then pull the housing forward to detach. Note the orientation of the control board wire connectors then disconnect.
How to replace motherboard in GE refrigerator?
How to Replace the Motherboard in a GE Refrigerator. Remove the screws from the motherboard access panel in the back of your refrigerator. It may be worthwhile to take a picture of the motherboard so you can accurately reconnect all the wires when installing the new one.
What happens if your GE refrigerator motherboard goes bad?
A large number of refrigerator problems can manifest from its motherboard. In your GE refrigerator, the motherboard controls pretty much all the basic functions of the machine. So if that motherboard goes bad or starts to malfunction, it can manifest in a stunning amount of issues. These issues include: Refrigerator not cooling.
How to align a new motherboard?
Align the new motherboard with the mounting pins and snap into place. Be careful when pressing on the new motherboard so as to not cause any new damage.
Why is my refrigerator stuck defrosting?
Stuck defrost cycle. Essentially, if your refrigerator is acting temperamental before breaking completely, it is likely a motherboard issue . However, while this may seem like a complex repair, the motherboard is easily accessible in GE refrigerators and is rather simple to replace.
Where is the main control board on a refrigerator?
Main control board is only accessible via rear panel of your refrigerator.
Can resistance measurements be taken with wires attached to the main board?
Taking resistance measurements with wires attached to the main board will produce inaccurate results.
Can you see burnt parts on a refrigerator?
xxxx Some burnt components may only be visible from the underside so you will have to unplug your refrigerator and disconnect all wires and remove the board for closer inspection.
1. Unplug the refrigerator
Before you start any appliance repair, always unplug the appliance. This step is even more important when you need to handle electric components and wiring.
2. Remove the old control board
First, remove the rectangular rear panel by loosening the two bolts and sliding the panel down. When you can see the control board, take a picture of the wires. You can use this as a guide when you connect the wires to the new part.
3. Install the new main control board
If you have an older model of refrigerator, the new board’s orientation of the green grounding wire might not be right for your refrigerator. Pry the wire free from the two terminals on the control board and switch the wire around so the grounding portion can reach the metal tab on the side of the refrigerator.
How long does it take to replace a GE refrigerator control board?
I added a video below to help with the process but it should only take about 20-30 minutes, even if you aren’t that handy.
Can a GE refrigerator controller board be replaced?
It is quite common for the GE refrigerator main control boards to have issues and need to be replaced. We’ve had to replace the control board on our GE refrigerator but it was really simple. If your GE main controller board is going out then you might experience one or more of the following issues…
What is the main board on a GE refrigerator?
The motherboard (also known as main board) controls everything so, theoretically everything that fails on a GE electronic refrigerator can be caused by the motherboard. The trick is to determine if the problem is the board or something else. With the expense of these boards there is no need to replace one unnecessarily.
What causes a GE refrigerator fan to short out?
What can happen is moisture will sometimes invade the evaporator fan and/or the evaporator thermistor and cause the board to short-out. Often when this happens the resistor shown in the picture below will burn out. If this resistor is burnt you must replace the board and the fan. Note that if the resistor isn’t burnt, the fan could still cause this problem. This page shows a motherboard test that can be performed to diagnose this problem. GE Refrigerator Fan diagnostics
Why is my refrigerator not cooling?
Refrigerator not cooling both fans running compressor off. If the compressor is off and both fans are running then the problem is the motherboard, compressor start-relay or compressor. More often than not, it is the motherboard.
Does a GE refrigerator have a motherboard?
This page outlines common motherboard problems on GE electronic refrigerators. In 2000, GE started making electronic refrigerators, which have one motherboard that controls all functions of the refrigerator. The motherboard (also known as main board) controls everything so, theoretically everything that fails on a GE electronic refrigerator can be ...
Can motherboard problems cause a refrigerator to defrost?
Like I said before, the main board controls everything the refrigerator does and this includes the defrost cycle. It controls when a defrost cycle occurs and how long it last. So motherboard problems can cause a defrost problem. However, I actually haven’t seen this but a few times and I work on GE electronic refrigerators all the time. I am not saying it isn’t the problem, just that you need to eliminate the other three possibilities first. Here is a link to a page dedicated to refrigerator defrost problems. On this page it shows a motherboard test that can be performed to diagnose this type of problem. GE Refrigerator Defrost Problem
How Do You Set the Temperature on a GE Refrigerator?
To set the temperature on a GE refrigerator, you have to consider the model first. One of the good features of GE refrigerators is that there are close similarities in their mode of operations, irrespective of the model.
How long do you have to wait to change the setting on a GE thermostat?
However, if you desire to change the setting after doing the above, you will have to wait a period of 24 hours before doing so. This period gives the unit time to adjust to the setting. Adjusting the setting more than once in less than 24 hours damages the unit.
What does the number on the left on a refrigerator mean?
The number on the left is the temperature setting of the freezer while that on the right is for the refrigerator.
What is the factory setting for a refrigerator?
With digitally-controlled models, the setting is a little different. They usually come with a factory setting of 37 degrees for the refrigerator compartment and 0 degrees for the freezer compartment.
What does O FF mean on a refrigerator?
When it gets to the highest number on the side you are pressing, that number will start flashing. When this happens, go over and press the other ‘Warmer’ key until O FF appears on the display. This display means that cooling is off in the unit. But it does not mean that electrical power in the refrigerator is off.
Where is the analog control on a food dispenser?
Note: The analog control is usually found on the dispenser panel, behind the fresh food crisper or above it.
Do refrigerators have temperature controls?
The older models have analog temperature controls. They are built in such a way that there are some with two different controls for the fridge and the freezer while some have one control for both.
