How to change the rear wiper on your 2010 GMC Terrain
- Preparation. Most blades are held in place with a tiny clip. ...
- Disconnect the old blade. Once the blade is free from the hook, push the blade a few inches down the arm to disconnect it. ...
- Position the new blade. Position the new blade so that the the hook is pointing at the wiper attachment. The hook will go over the top of the attachment.
- Lock the blade in place. Pull the blade toward the end of the arm. You'll hear a click when it locks into position.
- Done! You're all finished replacing the blade. Need more help? Looking for front wiper installation instructions?
How do I change the wiper blades on my Toyota Corolla?
The only tool needed to remove the old wiper blade is a plastic automotive panel pry bar. The first step is to gently pry up the base of the black plastic cover on the wiper blade. Use a plastic automotive pry bar tool to pull the base of the cover (close to where the wiper arm attaches to the window) straight away from the SUV.
How do you replace a 13 inch windshield wiper blade?
A few compatible replacement 13" wiper blades with their part numbers are as follows: Anco 31-13, Bosch 13-CA and ClearPlus 20131. The only tool needed to remove the old wiper blade is a plastic automotive panel pry bar. The first step is to gently pry up the base of the black plastic cover on the wiper blade.
How often should I change the wiper blades on my terrain?
We recommend changing the wiper blades on your Terrain at least once a year even if you don't use your wipers much - the sun wears out your wiper blades more than using them to wipe water. Another trick to enhance the longevity of your Terrain's wiper blades is to scrape off the ice and snow from the windshield before using your wipers.
How do you remove the wiper blades on a Ford Explorer?
The first step is to gently pry up the base of the black plastic cover on the wiper blade. Use a plastic automotive pry bar tool to pull the base of the cover (close to where the wiper arm attaches to the window) straight away from the SUV. It should pop out about a half inch when it is released.
How do you remove the rear wiper blade on a GMC Terrain?
1:145:352012 GMC Terrain Rear Wiper Replacement. - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you just kind of pull back and you're going to slide it to the end. It's going to move probablyMoreSo you just kind of pull back and you're going to slide it to the end. It's going to move probably about half north uh half an inch three quarters of an inch slide and then you just lift off.
How do you change wiper blades on a 2010 GMC Terrain?
0:210:59How To Replace Windshield Wiper Blades 10-17 GMC Terrain - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd the only tool that you're going to need for this is a screwdriver lift up your wiper arm. PushMoreAnd the only tool that you're going to need for this is a screwdriver lift up your wiper arm. Push on this button right here. And then the wiper blade will pull right off. Take your new wiper blade.
How do you change the rear wiper on a 2011 GMC Terrain?
Registered. The black plastic cover needs to be removed first. It snaps on to the wiper arm. Gently pull on both sides of the plastic cover to release the little hooks, then you can get to the wiper blade, just like the fronts.
How do you remove rear wiper blade replacement?
Replacing the rear wiper bladeFold the wiper arm outwards.Angle the wiper blade slightly out from the wiper arm.Grip around the wiper arm and using a thumb, press the blade forward (at the arrow) to loosen and remove the blade.Press the new wiper blade into place. ... Fold the wiper arm back down.
How do you remove the wiper blades on a GMC Terrain?
Begin on the driver's side of your Terrain. There is a small button on top of the wiper arm; the blade itself is attached beneath the arm. Push the button to release the wiper.
How do you change the rear wiper blade on a 2013 GMC Terrain?
0:522:45How to Replace Rear Wiper Blade on Chevy Equinox and GMC TerrainYouTubeStart of suggested clipEnd of suggested clipUsing a key you can just lift up the windshield wiper. And push that black plastic piece right upMoreUsing a key you can just lift up the windshield wiper. And push that black plastic piece right up against this metal arm and that'll allow you to slide the windshield or the wiper. Off of that metal.
How do you change the rear wiper blade on a 2010 Chevy Equinox?
1:002:40How to Replace Rear Wiper 10-17 Chevy Equinox - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere's a tab on the top of this blade in here so I use a body trim tool I like to push down on itMoreThere's a tab on the top of this blade in here so I use a body trim tool I like to push down on it when I push down and give it a push it back on the clicks. Rest that on the glass don't let it slap.
How do you put the rear wiper blade on a 2017 GMC Terrain?
1:262:432011-2017 Chevrolet Equinox /GMC Terrain Rear Wiper ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipOkay so to get this off there's at you have to reach around the back side there's a clip inside hereMoreOkay so to get this off there's at you have to reach around the back side there's a clip inside here and you want to push it up with your finger. So that you can slide the wiper.
How do you change wiper blades on a 2011 Equinox?
0:271:47How to Replace Front Windshield Wipers 10-17 Chevy EquinoxYouTubeStart of suggested clipEnd of suggested clipMake sure you get the proper style. And size and that comes with those clips to reinstall simply weMoreMake sure you get the proper style. And size and that comes with those clips to reinstall simply we guide it snaps right down. So bring it down slide slowly snap it in for the passenger side blade.
How do you remove a rear windshield wiper arm?
0:414:05How to replace a rear window wiper arm and blade on your car, truck or ...YouTubeStart of suggested clipEnd of suggested clipSo the tricky part is you need a tool a specific tool to help get this off there are two differentMoreSo the tricky part is you need a tool a specific tool to help get this off there are two different tools that you can use. One is this windshield wiper arm remover. Um i tried it it would be fine.
Are rear wiper blades different?
Rear wipers are usually a lot smaller than the fronts, and although plenty of cars have the same style wipers as on the front, some cars feature a model-specific rear wiper with the arm and the blade integrated as one unit.
How do you fit a rear windshield wiper?
1:382:15How to Fit Wiper Blades | Halfords UK - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd shatter your rear windscreen. Take the new blade and slot the wiper arm through the gap hook theMoreAnd shatter your rear windscreen. Take the new blade and slot the wiper arm through the gap hook the blade on the arm.
How do you change the rear wiper blade on a 2014 GMC Terrain?
1:302:432011-2017 Chevrolet Equinox /GMC Terrain Rear Wiper Blade ...YouTubeStart of suggested clipEnd of suggested clipOkay so to get this off there's at you have to reach around the back side there's a clip inside hereMoreOkay so to get this off there's at you have to reach around the back side there's a clip inside here and you want to push it up with your finger. So that you can slide the wiper.
How do you change the wiper blades on a 2018 GMC Terrain?
How to Change Trico 2018 GMC Terrain Wiper BladesBuy your new Trico® Standard Steel Frame Wipers. ... Prepare your GMC Terrain for an easier wiper change. ... Lift your wipers up from the windshield. ... Before you remove old wiper blades. ... Remove old wiper blades. ... Connect the new Trico® Standard Steel Frame Wipers.More items...
Prepare your GMC Sierra 1500 for an easier wiper change
Turn ON your wipers then turn off your GMC Sierra 1500 when the wipers are at their mid-way point on your windshield
Lift your wipers up from the windshield
With your wipers stopped midway on your windshield it should be easy to lift your wipers up and away from your windshield. Your old wipers should stick out, away, from your windshield. Now allowing for easy access during the rest of the changing process.
Before you remove old wiper blades
Be sure to take note of which new blade length goes on which side. Measure or just compare old blade length to the new Trico® wiper blades. Then place the new blades on the correct side.
Remove old wiper blades
Your 2010 GMC Sierra 1500 has a pinch tab attachment for the windshield wipers. Press the tab or button. Then tilt or slide it off the old wiper. Different wiper manufacturers use different style attachments for the pinch tab.
Check all connections..
Double check that wiper blades and adapters are locked on to the wiper arms.
Lower wipers back down to their functional positions
Carefully lower your new wipers down to your windshield. Discard old wipers and packaging material.
Prepare your GMC Terrain for an easier wiper change
Turn ON your wipers then turn off your GMC Terrain when the wipers are at their mid-way point on your windshield
Lift your wipers up from the windshield
With your wipers stopped midway on your windshield it should be easy to lift your wipers up and away from your windshield. Your old wipers should stick out, away, from your windshield. Now allowing for easy access during the rest of the changing process.
Before you remove old wiper blades
Be sure to take note of which new blade length goes on which side. Measure or just compare old blade length to the new Trico® wiper blades. Then place the new blades on the correct side.
Remove old wiper blades
Your 2010 GMC Terrain has a pinch tab attachment for the windshield wipers. Press the tab or button. Then tilt or slide it off the old wiper. Different wiper manufacturers use different style attachments for the pinch tab.
Check all connections..
Double check that wiper blades and adapters are locked on to the wiper arms.
Lower wipers back down to their functional positions
Carefully lower your new wipers down to your windshield. Discard old wipers and packaging material.
How to push plastic wipers?
Gently push the plastic cover until it firmly snaps over the base of the wiper assembly.
How to get old wiper blades out?
Press in the tab with your finger tip or the plastic tool to release the old wiper blade.
What size wiper blades are OEM?
The OEM wiper blade size in inches is 13".
Where is the hook for a wiper blade?
Line up the plastic hook on the underside of the wiper cover with the opening in the new wiper blade.
Where is the mounting bracket for a new wiper blade?
Line up the plastic mounting bracket in the center of the new wiper blade with the metal hook at the end of the wiper arm.
How big should a syringe pop out?
It should pop out about a half inch when it is released.
Disconnect the blade
Begin on the driver's side of your Terrain. There is a small button on top of the wiper arm; the blade itself is attached beneath the arm. Push the button to release the wiper.
Remove the old blade
Gently slide the wiper off the wiper arm. If the button has been depressed, the wiper should slide directly forward off the front of the wiper arm.
Attach the adapter
Place the adapter on top of the blade. Line up the 'v' on the adapter with the 'v' on the blade and snap it in to place.
Position the new blade
Gently push the wiper blade on to the arm as you slide it back along the arm. The blade will snap into place and the button will come through the hole on the arm with a 'click'.
Done!
You're all finished with the driver's side. Repeat the process on the passenger side of your Terrain.