6 Simple Steps on Winding a Worx Trimmer Line:
- Step 1: Pressing the release tabs First of all, find out the release tabs of the trimmer that hold the spool in position. ...
- Step 2: Pulling the spool ...
- Step 3: Dividing the strings ...
- Step 4: Feeding the strings ...
- Step 5: Placing the second string: ...
- Step 6: Sliding the spool back to the shaft ...
How do you remove the head of a WORX trimmer?
0:001:26Trimmer Head Removal - YouTubeYouTubeStart of suggested clipEnd of suggested clipOkay and then when you tighten it back. Up. There you go. And um some of them on our high-end. StuffMoreOkay and then when you tighten it back. Up. There you go. And um some of them on our high-end. Stuff didn't have to have a pin it was automatic you just push the button.
How do I change the trimmer thread?
0:001:50How to replace string trimmer edger line - YouTubeYouTubeStart of suggested clipEnd of suggested clipEven though you might have a different brand most string trimmers work generally the same. You canMoreEven though you might have a different brand most string trimmers work generally the same. You can either pinch off the cap like this one or sometimes it's a pinch and twist or just a twist.
How do you change the spool?
0:130:51How to Change a String Trimmer Replacement Spool - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo remove the old spool press the tabs on the spool cover and pull the cover straight off next liftMoreTo remove the old spool press the tabs on the spool cover and pull the cover straight off next lift the spool out of the hub.
How do you replace the string on a nylon trimmer?
1:119:56How to replace string trimmer line - YouTubeYouTubeStart of suggested clipEnd of suggested clipOn this trimmer head there are tabs on each side of the trimmer head. And so with my screwdriver. IMoreOn this trimmer head there are tabs on each side of the trimmer head. And so with my screwdriver. I will push the tabs in and that way I can release the cover on the trimmer.
How do I change the string on my head trimmer?
0:163:58How to Replace a String Trimmer Head - YouTubeYouTubeStart of suggested clipEnd of suggested clipUntil it locks in place okay. Right there it just locked. So now the other thing is most time they'MoreUntil it locks in place okay. Right there it just locked. So now the other thing is most time they're threaded opposite. So usually it's righty tighty lefty loosey in this situation it's the opposite.
How do you fit a strimmer spool?
0:111:12How to replace strimmer spool & line in your Black and Decker trimmerYouTubeStart of suggested clipEnd of suggested clipMake sure you've unplugged it first you've got a couple of options. You can replace just the spoonMoreMake sure you've unplugged it first you've got a couple of options. You can replace just the spoon and line or you can replace the spoon and line with the cover this includes the black ratchet.
How do you remove a spool assembly?
0:351:43How to Replace the Spool Lever on a Black and Decker String TrimmerYouTubeStart of suggested clipEnd of suggested clipNow I have access to the spool lever to remove it I just grab a pair of pliers and pull it straightMoreNow I have access to the spool lever to remove it I just grab a pair of pliers and pull it straight out now install the new spool lever. I simply line up the radius on the lever.
How does automatic feed string trimmer work?
0:000:32How To: Function Auto-Feed Head - YouTubeYouTubeStart of suggested clipEnd of suggested clipReowww be trimmers with auto-feed heads advance the line each time the trigger is released.MoreReowww be trimmers with auto-feed heads advance the line each time the trigger is released.
How do you change a trimmer blade?
0:050:35A-5 Clipper Blade Removal - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe little bar underneath of the blade push up on it and then push the blade back. And remove it inMoreThe little bar underneath of the blade push up on it and then push the blade back. And remove it in order to put it on you put it on the hinge push. Up on the blade latch.
Why does my trimmer line not feed?
0:051:22Top Reasons String Trimmer Line Not Feeding - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe trimmer line itself could be the wrong size for your trimmer or stuck in the trimmer. Head lineMoreThe trimmer line itself could be the wrong size for your trimmer or stuck in the trimmer. Head line that is too thick or too thin for the trimmer head won't feed properly.
How to tie trimmer line to spool?
Locate the starter holes in the spool. Insert the tip of the first length of trimmer line into one starter hole, and wind in the direction of the arrows. Wrap the line in neat, straight rows, to prevent jams later on. When there are about 5” or 6” of line remaining, snap it into the retainer on the spool to hold it in place. Repeat this process with the second line. At this point, the line ends should be at opposite sides of the spool, to match the eyelets on the outside of the tri mmer head.
How to keep trimmer line from jamming?
Locate the starter hole in the spool . Insert the tip of the trimmer line, and wind in the direction of the arrows. Wrap the line in neat, straight rows, to prevent jams later on. When there are about 5” or 6” of line remaining, snap it into the retainer on the spool to hold it in place.
How to replace a retaining cap on a spool?
Line up the retainer with the slot on the outside of the head. Replace the spool into the trimmer head. Remove the line from the retainer, and pull it through the slot to make sure it is feeding smoothly. Reattach the retaining cap.
How many halves does a double line trimmer have?
Double-line trimmers typically divide the spool into two halves (one fore each protruding line).
What happens if you buy the wrong width of line?
The length and width of line you need varies based on your trimmer. If you purchase the wrong width of line, the trimmer will not work correctly, so don’t waste your money by simply guessing at the hardware store.
How to remove retaining cap on a trimmer?
Remove the retaining cap from the trimmer head. This will probably involve either unscrewing it, pressing one or multiple tabs, or a combination of the two. Some models use different mechanisms for removing the spool. These should be designed to be relatively intuitive, but contact your trimmer’s manufacturer if you are having trouble figuring it out.
How long should a trimmer line be?
If you are not sure what size line your trimmer uses, check online—the manufacturer’s website often has instructions, and if not the customer service department should be able to help you.The length to which the line should be cut also varies, from around 10’ to 25’.
How to discard strings from a trimmer head?
Drag the spool of the trimmer head in order to discard the remaining strings from the spool.
Why does my string trimmer break?
A string trimmer has to deal with various harsh surfaces when weeding out the garden. In general, the trimmer line breaks more frequently when you do use the trimmer on thick grass patches, rocky surfaces, wet grounds, or other rough surfaces. If the trimmer head gets hit in a wall, garden stone, paving edge, or something like that, the trimmer line can break.
How does a Worx string trimmer work?
A Worx string trimmer is operated by a battery. It needs a standard spool along with a double string trimmer line to efficiently work. Over time, it needs to feed new strings as it works with a bump-feed system. Simply hit the trimmed head upon the ground in order to feed new string to your string trimmer.
Why won't my Worx trimmer work?
The Worx trimmer can’t work for several reasons. When the replacement battery is not placed correctly, your trimmer won’t work well. You should replace the charging station as soon as possible. First, plug the battery into the trimmer. Then tab the lock button. After that, press the trigger button. If you notice that the lock button is not working, you need to replace the lock button immediately. Plus, the Worx trimmer can stop working when you use it for weeding out rough surfaces frequently.
Where are the release tabs on a spool trimmer?
Keep an eye at the edge of the trimmer shaft where you’ll get the trimmer head. The releasing tabs are placed on the side of the head. After finding it, press the release tabs.
Can you wind a string trimmer without feeding new strings?
Without feeding new strings, the string trimmer won’t work properly. Thus, winding the trimmer line is even more important. That’s why we have discussed here the steps on how to wind Worx trimmer line. Do follow them:
Is a string trimmer useful?
Being a gardener, a dedicated string trimmer is one of my most useful tools. A couple of weeks ago while I was using the string trimmer, it wasn’t functioning well. Then, I realized I needed to feed a new string to my Worx trimmer.
What is a 2 for 1?
2-for-1 design that features a rotating head and guide wheels for transforming the string trimmer into a precision-cutting edger (as shown above with the WORX GT 3.0 ).
What is the fastest growing trimmer?
The latest generation of cordless string trimmers represent the fastest-growing, most popular type of trimmer amongst DIY homeowners, and it’s easy to understand why: Cordless trimmers strike a perfect balance between the power and freedom of gas trimmers and the quick-start reliability of an electric model.
What is the difference between a gas trimmer and a corded trimmer?
Plus, most have two-cycle engines that require you to precisely mix gas and oil. Corded electric string trimmers are quiet and reliable, but because they’re tethered to an extension cord, they’re only practical for very small yards.
What batteries are used in cordless trimmers?
Here are some key features to look for when shopping for a cordless string trimmer: The trimmer should be driven by high-performance rechargeable lithium-ion batteries, which possess impressive power and extended run time.
How to make a trimmer work better?
DON’T wildly swing the trimmer back and forth; instead, make slow, deliberate passes for greater control and cutting efficiency.
What is a Worx GT 3.0?
The WORX GT 3.0 features a unique Command Feed button that allows the user to spool out ¼ in. of line at a time whenever it’s needed.
How many volts does a trimmer battery have?
Be sure the trimmer comes with two battery packs and a charger, so you’ve always got a fresh battery to keep on trimming. And the battery size should be 20 volts or larger.
