How to Check the Battery of the Invisible Fence?
- Remove the receiver collar from your pet
- Carry the collar into the boundary area and listen for any audible sounds from the collar
- If the collar beeps, it means that the battery is working.
Full Answer
How do you test the battery of an invisible fence collar?
There are 3 steps to easily test the battery of the invisible fence receiver collar: First, you need to remove the collar from your dog. Make sure your dog is safely inside so they do not escape the yard while the collar is off. Take the collar out to the invisible fence boundary.
How do I replace the battery in my Invisible Fence?
These are not burns (since Invisible Fence uses static correction) but instead the result of skin irritation and not checking for the proper fitting of the collar. How do I replace the battery in my Invisible Fence Computer Collar? Use a small, thin coin to remove the Power Cap battery from the Computer Collar unit.
Where can I buy power cap batteries for my Invisible Fence?
Power Cap® Batteries for your Invisible Fence Computer Collar receiver can be purchased through our online store or by calling 866-804-1250. We recommend keeping your pet on an annual Power Cap Plan – it’s the safest, easiest and most reliable way to guarantee your pet’s safety 100% of the time.
What happens if you don’t Check Your Invisible Fence computer collar?
Failure to check ANY collar will result in skin irritation or pressure necrosis. These are not burns (since Invisible Fence uses static correction) but instead the result of skin irritation and not checking for the proper fitting of the collar. How do I replace the battery in my Invisible Fence Computer Collar?
How to contact invisible fence?
Why does my invisible fence beep?
How snug should an invisible fence collar be?
How to schedule a service appointment for invisible fence?
Is invisible fence CE compliant?
Can you put invisible fence wire on an existing fence?
Can you use an invisible fence on a multi pet home?
See 4 more
About this website
How do I test my Invisible Fence battery?
A light on the battery tester and audible tone on the receiver confirms that the collar is operating properly. If you get the audible warning but not a light, replace the battery.
How do I know when to change the battery in an Invisible Fence collar?
How often should I replace the battery in my Invisible Fence Computer Collar? We recommend changing the battery every 3 months - it's the safest, easiest and most reliable way to guarantee your pet's safety 100% of the time.
What does flashing red light mean on Invisible Fence collar?
Why is my Invisible Fence collar blinking red? If you have started to see a red flashing light on your pet's Computer Collar unit, your Power Cap battery may need to be replaced. You can order replacement batteries online, from your local dealer, or by calling 1-800-824-3647.
How do you test a wireless dog fence?
Touch both points on the collar while it is ticking or beeping. If you do not feel a shock, then there may be a problem with the receiver collar. Make sure you touch both points on the receiver at the same time when you hear the collar beeping. It will tell you definitively that the fence is or is not working.
What does blinking green light mean on Invisible Fence transmitter?
When testing the receiver in the signal field the status light will flash green when the receiver is in the audible zone and will flash green and red when the receiver is in the correction zone. You will be able to tell if your pet has tested the boundary by looking at the status light.
What does it mean if my Invisible Fence is beeping?
Why is my Invisible Fence control panel beeping? If your Invisible Fence control panel is beeping every second, the most likely issue is that you have a wire break somewhere on your property. These can be caused by digging too deep when working in the yard, burrowing animals, and even the weather.
Why is my electric fence on light flashing?
If the light is flashing every click (Regular Flash), then the fence is O.K. and the voltage to the fence is over 4,000 volts. If the light is flashing less than every click (intermittent flash) then the fence is loaded and the voltage to the fence is between 3,000 and 4,000 volts.
How do I know if my fence charger is working?
2:384:07How to test an electric fence without tools - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd if you're close enough to the charger that pulsing. Will line up with the clicking. If you stickMoreAnd if you're close enough to the charger that pulsing. Will line up with the clicking. If you stick it on there and you don't feel pulsing yet slide it a little bit closer. And a little bit closer.
How do I know if fi collar is charging?
If your Fi collar pulses blue 🔵, this indicates the Fi Collar is charging. When fully charged, the LED light on the Fi Collar will show a solid blue light 🔵 and stop pulsing.
Why is my electric dog fence not working?
If you hear the warning, but no light flashes, replace the battery. If you don't have a tester, replace the battery and carry the collar past the boundary. If the problem was a dead battery, the collar should work properly when you approach the hidden boundary wire.
How do you tell if an electric fence is working without touching it?
Many electric fences are inaccessible to the naked eye. So how would you know if a fence is electrified without touching it? The most obvious answer is to use a voltmeter.
Can you test an electric fence with a multimeter?
An Electric Fence is designed to use the ELECTRICITY in the fence as the deterent. If there is NO electricity then the fence is useless and will not fulfill its function. A standard electrician's voltmeter or electronic multimeter will not work with electric fences.
How do I know when my Pet Stop collar is charged?
0:452:03Pet Stop Charging Station Plus and EcoLite Collar Receiver - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf the red light comes on during charging it is recommended that you return the caller to theMoreIf the red light comes on during charging it is recommended that you return the caller to the charger. After it finishes charging just to confirm that you see a green light at this time.
When should I replace my PetSafe collar battery?
A replacement PetSafe® battery (RFA-67) can be found at many retailers. Contact the Customer Care Center at 1-800-732-2677 or visit our web site at www.petsafe.net to locate a retailer near you. Average battery life is 3 to 6 months, depending on how often your dog barks.
Why is my extreme dog fence collar blinking red?
PLEASE NOTE: The red flashing light on the receiver indicates a low battery in the collar that needs to be changed. Slowly approach your outside boundary loop wire and listen carefully for the warning beeps.
How long does the battery on e collar last?
Approximate Battery Life between charges is 40-60 hours. This device contains Lithium-Ion (Li-Ion) batteries; never incinerate, puncture, deform, shortcircuit, or charge with an inappropriate charger. Fire, explosion, property damage, or bodily harm may occur if this warning is not followed.
How Long Does An Invisible Fence Battery Last?
We recommend checking your battery at least once a month. The Invisible Fence Brand recommends changing your batteries every 3 months to keep your...
How To Change An Invisible Fence Collar Battery?
You will know the battery is dead if the collar is not beeping at the designated boundary line. If this is the case, it’s time to change the batter...
What Batteries Do Invisible Fence Collars Use?
The Invisible Fence brand uses a special type of battery called a Power Cap battery. This is a special 3-volt battery that was designed by Invisibl...
Dog Fence Troubleshooting Questions - The Invisible Fence® Brand
At Invisible Fence Brand, we welcome your questions. Take a look at some of the troubleshooting questions other happy customers asked, or call 866-804-1250.
How Close Can A Dog Get To An Invisible Fence? (Solved!) - Petloverguy.com
First, Make Sure Your Dog’s Old Enough to Handle an Invisible Fence. If you have a puppy, that’s great, but generally you shouldn’t get (or yet activate) an invisible fence until your dog is at least six months old.
How to contact invisible fence?
Bring your Invisible Fence Brand transmitter and Computer Collar Receiver with you to your new home and contact us at 866-804-1250 to install new boundary wire, flag your property and re-train your pet (s) to their new boundaries. To request a service appointment online, click here.
Why does my invisible fence beep?
These can be caused by digging too deep when working in the yard, burrowing animals, and even the weather. The most important thing to know is that your fence will NOT contain your pets when there is a wire break, so you should not let your pets outside until the issue is resolved. To set up a service call for a wire break, call 866-804-1250 or request a service appointment from your local dealer online by clicking here.
How snug should an invisible fence collar be?
The Invisible Fence collar should be snug enough to slide only one finger between a correction post and your pet’s skin. Remember to adjust the fit of the collar as your pet’s coat, weight, and age change. Your pet’s coat may change from season to season.
How to schedule a service appointment for invisible fence?
Request a service appointment online by clicking here or by calling us at 866-804-1250. At your service appointment, our Technician will test your entire system including the control panel, lightning and surge protection, Computer Collar Receivers, indoor units, and underground wire. We will provide a complete system analysis and make any necessary repairs to your Invisible Fence system.
Is invisible fence CE compliant?
CE - All Invisible Fence products sold within the European Economic Area (EEA) are CE compliant and bare the CE mark.
Can you put invisible fence wire on an existing fence?
Yes! Invisible Fence system boundary wire can be installed along an existing fence for reinforcement from digging, jumping, or getting out of an open gate. Our Pet Safety Professionals can aid you in the design of your system.
Can you use an invisible fence on a multi pet home?
Yes! Invisible Fence is the perfect solution for multi-pet homes. When used in conjunction with our MicroLite Computer Collar receivers, the Shields Indoor Solutions can be customized for multiple pets. You can keep one pet outside while allowing another to enter, you can separate food bowls, or you can even keep a certain pet off the couch – the options are endless. Learn more about Shields Multi-Pet Solutions.
What to do if your transmitter is not working?
You have a transmitter problem. Turn off the system and contact the manufacturer to help you troubleshoot further. It may be covered under warranty.
What causes an electric dog fence to break?
Heavy traffic, lawn edging, garden work, animals, and even ground shifting can cause an electric dog fence wire to break. The easiest way to find a wire break in an underground fence wire is to use a commercial locator and the short loop method. You’ll do this along the entire fence perimeter.
How to find a wire break in a Kolsol detector?
Short Loop Test to find the wire break – The Kolsol transmitter clips must connect to an unbroken length of wire to form a complete circuit. If there’s a wire break then the Kolsol detector won’t be able to see the wire. You’ll need to use the short loop method to find the broken wire. You’ll move the Kolsol transmitter and clips to different sections of the underground wire to find the wire break.
What happens if you cut an underground fence wire?
If the underground boundary wire is damaged or cut you won’t be able to use it to test the receiver collar or the invisible fence transmitter.
How to test a dog collar?
Test that the collar beeps or vibrates as you approach the collar. Note the distance that triggers it. Go back to the transmitter and turn it up to full power. This should increase the distance from the wire that will trigger the collar. Test the collar again.
How to increase distance from collar wire?
Go back to the transmitter and turn it up to full power. This should increase the distance from the wire that will trigger the collar.
Can you test a receiver collar with an invisible fence?
It’s hard to tell off the bat if it’s the receiver collar, invisible fence transmitter, or underground boundary wire that’s the issue. If the underground boundary wire is damaged or cut you won’t be able to use it to test the receiver collar or the invisible fence transmitter.
How often do you need to change the battery in an invisible fence?
Invisible Fence pet containment systems require a new battery in the dog's collar every 3 months. Invisible Fence dealers sell battery packs for around $15. This expensive battery is a plastic case around a common CR1/3 lithium cell, readily available from any hardware or drugstore for less than $5.00. Here is how to "renew" your battery in about 1 minute!
How to put a battery in a plastic cell?
Make sure the positive side of the battery only (the metal can) is in contact with the metal clip. Gently insert into the plastic housing, aligning the metal clip with the grooves on the inside of the housing.
What do you need to make a fence?
Step 1: Prepare Tools and Supplies. You will need: - A 3V lithium cell known as CR1/3N or DL1/3N. - A spent Invisible Fence battery module. - A razor blade, a sharp knife or a very small shovel. - Optionally, something to grasp the battery with to avoid cutting off your fingers. Ask Question.
How to test if a battery is good?
Battery Test – Test the battery by touching the two alligator clips together so the metal is toughing. If the Status Light turn red, the battery is good.
How to make a dog fence transmitter work?
Use the locator to trace the end of the pair (where it splits in your yard). Dig up the pair and disconnect it from the outside loop. Reconnect your dog fence wires at the transmitter, then connect your two wires from the twisted pair. This should complete the loop and make your fence transmitter work. If your fence is still alarming, the break is ...
How to get a tone on a wire locator?
To start, turn your Wire Locator Receiver on near the transmitter. You should hear a very distinctive solid tone. As you walk away from the transmitter the tone will disappear. Hold the Signal Receiver Pendulum near the ground and walk towards the wire. A tone should start to appear and get loudest right near the wire.
Where is the break in a dog fence?
If your fence is still alarming, the break is somewhere in the twisted pair. If your dog fence starts working the break is somewhere in the outside loop. Now that the pair has been eliminated, hook your buried wire locator transmitter alligator clip to the outside loop wire. Hook the other clip to a shovel or screwdriver stuck in the ground.
How to make a pet stop speaker?
Speaker. Step 1: Put the batteries in the Receiver and Transmitter. Each one gets a battery in the back of the unit. Step 2: Now go to your transmitter. In this example we are using a PetStop® transmitter. Some of the transmitters – like this one – have a cover that you just pop off.
Can you use headphones with fence wire?
You can use the included headphones or the built-in speaker. As you approach the break in the under ground fence wire the solid tone will start to soften. At or near the break the tone will drop off significantly or disappear completely.
Do dog fences have to be twisted?
Most underground dog fences start with a twisted pair that goes from the transmitter to the outside loop in your yard (this wire does not have to be twisted but can be run in the same trench).
How to contact invisible fence?
Bring your Invisible Fence Brand transmitter and Computer Collar Receiver with you to your new home and contact us at 866-804-1250 to install new boundary wire, flag your property and re-train your pet (s) to their new boundaries. To request a service appointment online, click here.
Why does my invisible fence beep?
These can be caused by digging too deep when working in the yard, burrowing animals, and even the weather. The most important thing to know is that your fence will NOT contain your pets when there is a wire break, so you should not let your pets outside until the issue is resolved. To set up a service call for a wire break, call 866-804-1250 or request a service appointment from your local dealer online by clicking here.
How snug should an invisible fence collar be?
The Invisible Fence collar should be snug enough to slide only one finger between a correction post and your pet’s skin. Remember to adjust the fit of the collar as your pet’s coat, weight, and age change. Your pet’s coat may change from season to season.
How to schedule a service appointment for invisible fence?
Request a service appointment online by clicking here or by calling us at 866-804-1250. At your service appointment, our Technician will test your entire system including the control panel, lightning and surge protection, Computer Collar Receivers, indoor units, and underground wire. We will provide a complete system analysis and make any necessary repairs to your Invisible Fence system.
Is invisible fence CE compliant?
CE - All Invisible Fence products sold within the European Economic Area (EEA) are CE compliant and bare the CE mark.
Can you put invisible fence wire on an existing fence?
Yes! Invisible Fence system boundary wire can be installed along an existing fence for reinforcement from digging, jumping, or getting out of an open gate. Our Pet Safety Professionals can aid you in the design of your system.
Can you use an invisible fence on a multi pet home?
Yes! Invisible Fence is the perfect solution for multi-pet homes. When used in conjunction with our MicroLite Computer Collar receivers, the Shields Indoor Solutions can be customized for multiple pets. You can keep one pet outside while allowing another to enter, you can separate food bowls, or you can even keep a certain pet off the couch – the options are endless. Learn more about Shields Multi-Pet Solutions.
