- Unplug the Whirlpool Duet washer power cord from the wall outlet. ...
- Go behind the Duet and remove the three screws securing the top panel to the rear panel with a Phillips-head screwdriver.
- Locate the pressure switch inside the washer cabinet. From the rear of the washer, the switch will be on the rear left corner of the cabinet.
- Adjust the scale on your ohmmeter to the RX1 or X1 scale. ...
- Test the pressure switch's "suds detect" function. Stick one probe into far right hole and another probe into the hole next to that one.
- Place a probe into the second hole from the left and the other probe in the third hole from the left to test the rinse.
How do you fix a whirlpool duet washer that won't turn on?
Use an ohmmeter to determine whether the pressure switch is malfunctioning. Unplug the Whirlpool Duet washer power cord from the wall outlet. Pull the washer away from the back wall far enough that you can slide the top off the washer and get behind the washer.
Where is the pressure switch on a whirlpool washing machine?
Locate the pressure switch inside the washer cabinet. From the rear of the washer, the switch will be on the rear left corner of the cabinet. The pressure switch is round with a wiring harness connecting to the back of the switch.
How do I test the pressure sensor on my duet washer?
The pressure sensor is somewhat difficult to test directly, so the easiest way is to visual check that the pressure hose connecting the switch to the tub is not pinched or kinked. and do a Duet Washer Quick Diagnostic Test (the C06 portion of the quick test should fill the washer to "wash level".
How do you test a pressure switch on a pressure washer?
Test the pressure switch's "suds detect" function. Stick one probe into far right hole and another probe into the hole next to that one. Again, your ohmmeter should read zero.
How do I test my Whirlpool pressure switch?
0:241:52Whirlpool Front-Load Washer Pressure Switch #WPW10448876YouTubeStart of suggested clipEnd of suggested clipBe sure to unplug the power cord. Use a quarter inch socket or nut driver to unthread the rearMoreBe sure to unplug the power cord. Use a quarter inch socket or nut driver to unthread the rear screws securing the top panel. Slide the top panel back and lift up to detach.
Where is the pressure switch on a Whirlpool Duet?
0:534:49Whirlpool Washer Repair - How to Replace the Pressure SwitchYouTubeStart of suggested clipEnd of suggested clipAnd pull it off of the side of the cabinet. So just reaching underneath cars depress those two tabsMoreAnd pull it off of the side of the cabinet. So just reaching underneath cars depress those two tabs on the connector. And then pry that connector off of the whole switch two locking tabs.
How do you test a washing machine pressure switch?
Testing the SwitchFind the wires leading to the terminals of the switch. ... The water level switch has three terminals. ... Touch the probes to terminals 1 and 3, and note the reading (∞ or approximately 0.0).Touch the probes to terminals 2 and 3, and note the reading.More items...•
How do you reset the pressure switch on a washing machine?
Some pressure switches have to be reset when the machine is moved or before the machine's first use. To do this put two litres of water inside the drum set the machine to a drain cycle and it will automatically reset the machine.
How do I know if my washing machine pressure switch is bad?
1:224:05How to Test the Pressure Switch on your Washer - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo that's a good reason if you do not get that reading when you hear the diaphragm inside theMoreSo that's a good reason if you do not get that reading when you hear the diaphragm inside the pressure switch click then the pressure switch is bad.
How do you put a Whirlpool Duet washer in diagnostic mode?
For Whirlpool duet front load washer, you just need to poke any 3 keys three(3) times (other than the Power button) to put your washer into diagnostic mode. For instance, you can just poke Spin, Soil, & Extra Rinse buttons in that sequence, three times in fairly quick succession.
How do I test a pressure switch with a multimeter?
Disconnect the wires connected to the pressure switch by pulling the wire connectors off of the switch terminals. Set a multimeter to test for resistance (ohms). Touch each tester probe to one of the switch terminals. The tester should read 0 or close to 0 (indicating no resistance).
How do you reset a Whirlpool washing machine?
Follow these steps to reset your Whirlpool washer:Turn the washing machine off using the control panel.Unplug the washing machine.Wait three minutes.Plug the washer back in, and wait thirty seconds before turning the washer on.
What is F20 code on Whirlpool Duet washer?
F20 Error Code F20 indicates a water inlet problem—no water or insufficient water supply. Try the following method to resolve: Select PAUSE/CANCEL twice to cancel the cycle. Unplug washer or disconnect power.
What does a pressure sensor do in a washing machine?
The level sensor uses a pressure switch to detect the water level in the tub. This switch controls how high the tub fills with water. The big end of the hose connects to the bottom of the tub, while the small end connects to the switch.
How do you bypass a washing machine sensor?
Quick Water Level Bypassing Formula For Washing MachineLet us say you have 2 lbs of clothes.Add the 2 lbs of clothes in the washtub.Before commencing the wash cycle, pour 4 lbs of water over the clothes and let water to soak into the fabric.Start the wash cycle. ... You have successfully bypassed water level sensor.More items...•
How does a pressure washer pressure switch work?
1:241:53Pressure Switch Operating Principles - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe switch activates to control whatever causes the pressure to build up such as the addition ofMoreThe switch activates to control whatever causes the pressure to build up such as the addition of reactive chemicals to the mixture. Amount of gas or liquid in the process container.
How do I fix the F20 code on my Whirlpool Duet washer?
F20 Error Code F20 indicates a water inlet problem—no water or insufficient water supply. Try the following method to resolve: Select PAUSE/CANCEL twice to cancel the cycle. Unplug washer or disconnect power.
Where is the water level switch on a Whirlpool washer?
Look for the water level switch on the right side of the cabinet toward the back of the washer. The round water level switch attaches to the side of the cabinet. A rubber tube connects the water level switch to the washtub.
How do I reset my F21 whirlpool?
The first step is to try to reset your washer. Sometimes your washer might display the F21 error code when it shouldn't, and a simple reset will get your washer working again. To reset your washer, you simply need to press “Pause/Cancel” to cancel the current wash cycle.
How do you adjust the water level on a Whirlpool front load washer?
0:003:23Whirlpool Washer - Adjusting Water Level Selector - YouTubeYouTubeStart of suggested clipEnd of suggested clipLines off you just feel under there you can find the clips and pop them. The wood switches here youMoreLines off you just feel under there you can find the clips and pop them. The wood switches here you wanna be careful on this side okay there it is.
What is a duet washer pressure sensor?
The Duet washer pressure sensor switch detects how much water is in the washing machine and reports this information to the Duet main control. The pressure sensor is somewhat difficult to test directly, so the easiest way is to visual check that the pressure hose connecting the switch to the tub is not pinched or kinked. and do a Duet Washer Quick Diagnostic Test (the C06 portion of the quick test should fill the washer to "wash level".
How does a duet washer work?
The Duet washer uses a series of automatic solenoid valves to control hot and cold water flow into the washing machine. When the valve coils are supplied with 120VAC from the Duet washer control they should open and allow water to flow trough the dispensing system into the washer tub. Problems occur when the valve will not open even when supplied with the proper voltage from he control or do not close fully allowing water to move into the washer even when there is no power supplied. (Each valve coil should show some resistance when measured with a multi meter, not open or 0Ω)
Why won't my duet washer drain?
The duet washer drain pump's purpose is also fairly obvious… Get that nasty water out of the washer. it connects to the Duet main control at the DP2 connection and should be sent apex. 120VAC to drain. One of the most common problems causing your Duet washer not do drain is not the pump at all but something jamming the pump like a bobby pin or bra wire. If your Duet won't drain you may also want to check for a sock, coins, or lint blocking a hose. Clean out your pockets!
What is a duet flow meter?
The Duet washer flow meter is a very reliable device that… measures water flow into the wash tub. If your Duet washer won't fill with water check the easy stuff first, home valves, washer valves… Flow meter is last on the list of possible causes.
How many volts should a duet have?
This should have 5 volts DC from pin 7 (ground) to pin 2. Duet User Interface Test
What is MCU in washer?
Motor Control (MCU) The Duet uses a secondary control board to control the washers motor windings. It has 3 main connections. 1. Power in from MS2 on the washer's main control. 2. Power out to the motor windings (3 blue wires) 3. Communication with the washer's main control at the MI3 plug.
Where is the pressure switch hose located on a washer?
The first step is to remove the top of the washer. The pressure switch hose is located between the pressure switch and the air trap. Ensure that it isn’t pinched, twisted, or punctured. If it isn’t pinched or so, disconnect the pressure switch hose and blow it out to ensure it’s unclogged.
What does it mean when the pressure switch is not detecting water?
To sum up, this error means that the main control isn’t receiving the proper signal from the pressure switch, which may not detect the water level. The solution is to reboot the unit, examine the pressure hose and switch, check the airlock tube, or inspect the wiring and board.
How Do You Fix the F3 E1 Error on a Whirlpool Washer?
It’s helpful to turn the power off your Whirlpool duet washer. Then, disconnect it from the power supply for 15 minutes. Then, try plugging it and starting a trial cycle . If the error code disappears, you’ve just fixed an electronic failure.
What does the digits on a pressure switch mean?
The digits of the error code mean the main control board can’t get the proper signal from the pressure switch.
Why is my pressure sensor still around?
If you’ve replaced the pressure sensor of your device and the signal’s still around, the pipe is probably the reason for that malfunction. And what caused it is the soapy scum and mineral deposits inside.
What to do if pressure sensor fails?
If all else fails, there’s nothing left to blame but the wires or board. Examine the wires connected to the pressure sensor. If they’re damaged or burned, replace them.
Why is the pressure switch hose so important?
So, it’s essential to optimal operation.
What is a water level pressure switch?
A water-level pressure switch is a mechanism that sends power from the timer to the water inlet valve and the temperature switch during each cycle when the washing machine tub needs to be filled. The water-level pressure switch is manufactured out of a white plastic material.A new water-level pressure switch may be needed if the washing machine does not fill correctly. If this part is bad, the washing machine may not fill at all or it could overfill. Use caution when repairing an electric appliance. Never perform care and maintenance on an appliance that is powered on.This is a genuine Whirlpool part and is sourced directly from the manufacturer. It is sold individually. This specific water-level pressure switch is compatible with washing machines that are manufactured by either Whirlpool or Maytag.
Does cleaning water inlet valve filter screens fix drain trap?
Cleaning the water inlet valve filter screens and drain trap did not really solve the problem. Replacing the water inlet valve fixed the slow fill. Replacing the pressure sensor fixed the problem errors (F08 E01)
Can a Whirlpool washing machine overfill?
If this part is bad, the washing machine may not fill at all or it could overfill. Use caution when repairing an electric appliance. Never perform care and maintenance on an appliance that is powered on.This is a genuine Whirlpool part and is sourced directly from the manufacturer. It is sold individually.
Does Maytag washer have a sud code?
Maytag washer with f9e1 and sud codes. No obstructions on drain. Pump runs,but will not completely drain. Or complete a cycle before it sets code. Im able to blow through the pressure switch hose. But i have not inspected for leaks.
