How do I get rid of a chocolate fountain?
Place the fountain in a large plastic bag. Double-bag the fountain, if possible. The fountain will still have chocolate inside, so carry it home this way to avoid a mess.
How do I clean my fountain?
Disassemble and clean the fountain. If the fountain has dishwasher-proof pieces, remove these, clean them in warm soapy water, and place them in the dishwasher. Scrub any pieces you cannot wash in the dishwasher with a soft sponge and soapy water. The motor and the pump should never be placed in the dishwasher. These are electrical hazards.
How do you make a chocolate fountain for kids?
Assembling the Fountain Wash the parts. Attach the auger tube to the base. Attach the tiers to the auger tube, if applicable. Install the auger. Lock the crown in place. Test the fountain. Buy chocolate. Melt the chocolate. Pour the melted chocolate into the base of the fountain.
Can you put a chocolate fountain in the dishwasher?
Never put the motor and pump, contained in the chocolate fountain base, into the dishwasher. It is a good idea to put the fountain into soapy water before putting in the dishwasher. Use hot water and soap to thoroughly clean the chocolate fountain. Hot water helps the chocolate to stay liquid.
What is the easiest way to clean a chocolate fountain?
Process of CleaningStep 1: Begin by draining out all the excess chocolate from the fountain. ... Step 2: Once you have got rid of all the excess chocolate, fill the basin with a jug full of warm water and run the fountain for a few minutes. ... Step 3: Using a sponge and some warm soapy solution, get to washing the basin.More items...
How do you clean chocolate from a chocolate fountain?
Scrape the chocolate from the bowl with a wooden spoon or stiffer plastic spatula, then wipe it out repeatedly with your wet, soapy cloth until it's finally clean. Then rinse your pieces and let them drain.
Are Chocolate Fountains hard to clean?
Are Chocolate Fountains hard to clean? No. Some Fountains for example the Sephra Commercial Fountains have a removable bowl. This and the tier system and spiral drive (auger) can be washed by hand in warm, soapy water.
Can you reuse chocolate fountain chocolate?
Reuse of the same chocolate, even for a function the following day, is not recommended because the chocolate can become “contaminated” with bits of fruit, cookies, etc. in an uncontrolled environment.
How do you clean hardened chocolate?
Since chocolate stains set with heat and time, these can be difficult to remove. Your best bet is to rub liquid laundry detergent or dish soap on the stained area and soak the clothing in a bowl of cold water for at least 30 minutes. Repeat this step until you aren't seeing any improvement.
Can you run water through a chocolate fountain?
To test the fountain, water can be used. However, water is too thin to be carried up the auger. submersed in water to avoid damaging the wiring and electrical parts in the base. Once the parts have been cleaned, simply place the auger back on the t-shaft and the auger tube on the four posts.
How long can you leave a Chocolate Fountain on for?
How long can a Chocolate Fountain run for? Most Home Fountains are designed to run for up to approx 3 hours - perfect for a party or celebratory dinner.
Do I need to add oil to Chocolate Fountain?
There are chocolate pellets that are formulated specifically for chocolate fountains. They are high in cocoa butter so no oil is needed. You can also use semi sweet chocolate, milk chocolate or white chocolate. If you do, you will need to add either canola, vegetable oil, or cocoa butter to this chocolate.
How do you clean a Mistral Chocolate Fountain?
Remove the centre column with the tiers and spiral from the Chocolate Fountain Base. Gently wipe them with a soft damp cloth or sponge and place them in a sink. 4. Next thoroughly wash the centre column with the tiers and spiral in warm soapy water before rinsing and drying.
What can I do with leftover chocolate from fountain?
As a general rule, the easiest way to store leftover melted chocolate is to put it in the fridge. Allow the melted chocolate to cool and store it in an airtight container. Place the container of chocolate in the fridge for up to 3 months. This chocolate can be reused once it is properly reheated.
What kind of oil do you use in a chocolate fountain?
Chocolate Fountain Tip ♥ Use a ratio of 1 Tbls Coconut Oil: 1 cup Chocolate Chips = Smooth, Delicious Perfection!
Can you melt chocolate more than once?
Once melted chocolate has been tempered, it must be used before it cools and sets. If it cools to about 84°F to 86°F and is still fairly liquid, it can be reheated to a liquid consistency. If it has completely cooled and solidified, it should be re-tempered.
How to Clean a Chocolate Fountain
Dealing with liquid chocolate is indeed a messy job; forget liquid chocolate, even regular chocolate can be a messy affair. Cleaning up after a party doesn’t seem to offer an interesting prospective; yet you can’t leave it either, for you might wake up to unwanted guests (pests) the next day.
Process of Cleaning
Look to your left for the things used to do the cleaning, and once you have everything in hand, you can begin cleaning the chocolate fountain.
Time Factor
Many of you must be wondering if this will take you a long time to complete, isn’t it? Trust me, the entire process of washing will hardly take you a couple of minutes. Ensure that the water you use is not just warm but hot; hot water will work faster and leave you with lesser tension as it removes all possible grime and residue in minutes.
How to Use a Chocolate Fountain
Though each chocolate fountain is different, they all have a similar set-up. If you’re using the Wilton Chocolate Pro fountain, all you need to do is preheat your machine by turning the dial on the front.
How Does a Chocolate Fountain Work?
The workings of a fountain begin in the base, which holds a heating element that keeps your chocolate at a liquid state. The melted chocolate then moves up a large screw auger (sometimes called an Archimedes’ screw), which cycles constantly to move the melted chocolate up to the top of the machine.
What Kind of Chocolate Can Be Used in a Chocolate Fountain?
If you’re using a Wilton-branded fountain, we suggest using Wilton Chocolate Pro Chocolate Melting Wafers, which are made especially for our chocolate fountains.
Can You Use Candy Melts in a Chocolate Fountain?
We do not recommend using Candy Melts candy in your chocolate fountain. Candy Melts don’t have the right viscosity to run through the fountain and you don’t want to risk breaking your machine!
How to Melt Chocolate for a Chocolate Fountain
You can melt your chocolate in the microwave or in a double boiler on the stove. Just be sure your chocolate is completely melted before adding it to your fountain. If you need to add any oil to your chocolate, make sure that is incorporated as well before pouring it into your fountain.
How to Clean a Chocolate Fountain
Once you’re done using your fountain, turn it off and unplug it from the wall. You want your fountain to cool slightly before cleaning, but don’t wait too long because you don’t want the chocolate to harden, either.
What to Dip in a Chocolate Fountain
Here are a few tasty treats that you can dip in your chocolate fountain!
What are chocolate fountains?
Learn more... Chocolate fountains are a great addition to any party or event. They are a fun way to serve food and delight guests. You can dip a variety of fruits and snacks under the running chocolate, so you’ll also be able to have multiple accompaniments at your event.
What to serve with melted chocolate fountain?
Pair the fountain with great snacks. Snacks that go well with melted chocolate include pretzels , cut-up pieces of pound cake, and meringues .
How to use a chocolate auger?
The auger looks like a corkscrew and is what drives the chocolate up the fountain. Slide the auger down the center of the auger tube and twist it clockwise into the base until you feel a light resistance - this means your auger is locked and ready to use.
How to attach auger tube to fountain?
Attach the auger tube to the base. The fountain you purchase will come with instructions on how to do this for your specific model. For any model, the tube should stand straight from the base. If your auger tube has multiple parts, you will first need to lock these together to create a longer tube.
How to test a fountain?
Test the fountain. Plug it into the electricity and run the machine without chocolate to ensure that you’ve got a fully functioning fountain. Don’t turn on the heat.
What is the crown on a fountain?
Lock the crown in place. The crown secures the auger from the top end and is the finishing touch on your fountain.
Can you wash a chocolate fountain in the dishwasher?
Scrub any pieces you cannot wash in the dishwasher with a soft sponge and soapy water. The motor and the pump should never be placed in the dishwasher. These are electrical hazards. Check your owner's manual for specific instructions on how to most efficiently wash your chocolate fountain.
