How to Clean a Toilet
- Begin by applying toilet cleaner to the bowl, and allow it to soak. If you’re using vinegar in place of toilet cleaner,...
- While the cleaner soaks in, spray the exterior of the toilet with an all-purpose disinfectant. If the toilet is extra...
- Next, use a scrub sponge to clean the exterior of the toilet. Pay attention the base and floor around the...
What is the easiest way to clean a toilet?
What is the easiest toilet to clean?
- Pour 1/4 cup of Borax into the toilet bowl and swish it around with a toilet brush.
- Add 1 cup of vinegar and allow the mixture to sit in the bowl for about 20 minutes.
- Finish by scrubbing the bowl with a toilet brush to remove the stains. Flush the toilet to rinse.
How to naturally clean a toilet?
- Heat one gallon of water to boiling on the stovetop or in a microwave.
- Carefully pour the hot water into a plastic cleaning bucket. ...
- Place the bucket in a large sink, bathtub, or shower stall. ...
- Wearing rubber gloves and eye protection, add one cup of liquid chlorine bleach.
- Slowly add the holder and toilet brush to avoid splashing.
How to always have a clean toilet?
Always wonder about this too, wiping is not adequate to clean.' Another commenter agreed and said they've gone a step further, explaining: 'I have an electronic in-toilet bidet. It washes with warm water, front and back, and then dries with warm air.
How to clean a badly stained toilet?
Natural ways to clean a badly stained toilet:
- Method 3: Pumice rock. Pumice stones are not recommended to wash marble, laminate, plastic, or fiberglass toilets; doing so will result in permanent scratches.
- Method 4: White vinegar. The pH level means that vinegar can break down not just hard water stains, but also other stains effectively.
- Method 5: Tea tree oil. ...
- Method 6: Cola. ...
What is the best thing to use to clean your toilet?
The experts we talked to recommended any cleaner with some form of bleach, but you can find plenty of bleach alternatives, as well. I personally use Lysol Hydrogen Peroxide Toilet Bowl Cleaner. A bucket: To ensure that the entire bowl gets clean, you need to reduce the water level before applying the cleaner.
How do you clean a really dirty toilet?
How to clean a toilet quicklyUse toilet cleaner on the rim and sides. Put on your rubber gloves, lift up the toilet seat, and squirt your toilet cleaner around the rim and the sides.Scrub the toilet with the toilet brush. ... Wipe the seat and lid. ... Wipe the outside. ... Bin or flush.
Do you flush after using toilet bowl cleaner?
"Be sure to scrub well with the cleaner around the inside of your bowl, the toilet bend if possible, and underneath the rim of the bowl," she explains. "Then, you'll want to let everything sit for five minutes, and flush it all away."
How do I get brown stains off the bottom of my toilet?
Vinegar and baking soda: Add 1 or 2 cups of vinegar to the toilet bowl along with a few sprinkles of baking soda. Swish the solution around the bowl with your brush for a few minutes and then let it sit for about 15 minutes. Scrub the stains with your brush (or pumice stone).
How often should a toilet bowl be cleaned?
“Once a week?” The Good Housekeeping Institute agrees: “At least once a week, but if there are people with bugs or small children around, then daily.” Bloomfield thinks a toilet should be cleaned two or three times a week, to stop the spread of germs, while Crombie performs “a five-minute challenge” on her toilets ...
Is it safe to put cleaner in toilet tank?
In general, plumbers caution against the use of any chemicals inside a toilet tank and suggest instead using bowl-based toilet cleaners. Adding anything but water to a toilet tank could result in potentially costly repairs, Abrams says.
How do you clean a toilet without scrubbing?
How to Keep a Toilet Bowl Clean Without Scrubbing Prevent dirt and stains with an automatic cleaner. Keep your toilet fresh with a cleaning tablet. Do a quick clean with denture cleaning tablets. Clean your toilet overnight with Coke. Soak off stains with vinegar and toilet paper. Try DIY toilet bombs.More items...•
What causes brown stain in bottom of toilet bowl?
If you get brown stains in your toilet bowl, the good news is that it's not caused by anything that you, ahem, do in the bathroom. It's actually due to high concentrations of minerals in hard water, like calcium, iron, and manganese, that build up inside the toilet bowl over time, according to Hunker.
Why does my toilet bowl get dirty so quickly?
The high mineral content in hard water can cause colored rings and tracks to form in your toilet bowl surprisingly quickly, making it appear dirty even if it was cleaned recently!
How can I whiten my toilet bowl?
0:522:41How to CLEAN TOILET and WHITENING it - Toilet cleaning tipYouTubeStart of suggested clipEnd of suggested clipAnd hydrogen peroxide known for its whitening. And antibacterial virtues pour three tablespoons ofMoreAnd hydrogen peroxide known for its whitening. And antibacterial virtues pour three tablespoons of per carbonate into your container. And then press it to put one liter of water to boil.
How to get hard water stains out of toilet?
Follow these simple steps for either toilet cleaner to remove hard toilet stains above and below the waterline: Flush your toilet to remove any excess grime. Apply a generous amount of product directly onto the stains. Let it soak for 15 minutes, keeping the toilet lid open. Brush the entire bowl thoroughly with a bowl brush and flush ...
Why is my toilet chalky?
These hard water toilet stains are caused by water passing through soft rocks such as chalk and limestone , therefore, picking up minerals that can cause stubborn toilet stains.
Kill 99.9 percent of bacteria and viruses weekly with this cleaning method
Every editorial product is independently selected, though we may be compensated or receive an affiliate commission if you buy something through our links. Ratings and prices are accurate and items are in stock as of time of publication.
Introduction
Nobody likes to clean a toilet. Then again, there's nothing worse than a dirty, nasty, germ-filled toilet. Do these five quick and easy steps weekly for a bacteria-free bathroom.
Project step-by-step (5)
Remove anything in your way of cleaning the entire toilet: candles, tissue box, room deodorizer, etc.
How to keep toilet tank clean?
KEEPING THE TOILET TANK CLEAN 1 Consider putting tank tablets in the toilet. These can keep mildew, minerals, and contaminants at a minimum. Be careful not to buy tank tablets that contain bleach, as it is known to corrode metal. Do your homework and read online reviews thoroughly before purchasing any. To reduce the use of chemicals in the home and the risk of damage, keep in mind that tablets marketed as “natural” or “chemical-free” may be best suited for the job. 2 If you’re not using tablets, drain your toilet tank and fill with vinegar (as in Step 2) on a more regular basis. The vinegar kills mildew and dissolves mineral deposit build-up before it becomes a problem. Simply leave it in there overnight and flush it out the next morning. 3 You might hear suggestion a monthly cleaning regiment for toilet tanks, but we think twice yearly will suffice for small households with more than one toilet shared by the family. Situation dictates maintenance needs, though. If you have hard water, mineral deposits may build up more quickly. If the toilet is located in a high-traffic area, whether in a home with a big family or your place of business, the heavier use will require more frequent cleaning too. Lift the tank lid to inspect it every two weeks, and then you’ll know what kind of cleaning cycle your toilet might need. Track your inspections and cleanings on a calendar so you remain on top of things.
How to clean a toilet tank with a diluted disinfectant?
Simply soak a sponge with clean, warm water and spray some cleaner onto the sponge itself. Then, wipe down the ball float, flapper , and other toilet tank workings with the diluted disinfectant.
How many flushes does a toilet need?
Depending on your flow rate, this may require two or three flushes.
What does the lid on a toilet do?
Its lid keeps any dirt, bacterial contamination, and mineral build-up out-of-sight until you need to lift it off to reach in and stop the toilet from running manually or assess the parts for some other repair.
How long does it take for disinfectant to sit on metal?
Generally, you’ll let the disinfectant sit for 10 to 15 minutes. Grab a scrub brush!
How long does vinegar take to fill a tank?
(Fortunately, at roughly $3 a gallon, it’s not as expensive as it sounds!) Pour in the vinegar and let it sit for 12 hours without flushing.
Can you remove rust stains from the rim of a toilet bowl?
Don’t kick yourself yet for missing a spot, because this one often goes overlooked: the toilet tank.
What supplies do you need to clean a toilet?
The general toilet cleaning supplies include rubber gloves, bleach, water, disinfectant spray, pumice stone, toilet cleaner solution, toilet brush, vinegar or baking soda, scrub sponge, and paper towels. Always wear rubber gloves to protect your skin from bacteria and the chemicals in the cleaning agents. You should also be sure to disinfect them ...
How to clean a toilet bowl with a sponge?
Ensure that all equipment used, especially the ones in direct contact with the toilet bowl, is thoroughly washed and disinfected. Soak the toilet brush and scrub sponge in hot water to kill the bacteria that may be stuck in the bristles. Leave them to drip dry before storing them in their appropriate holder.
How to clean brown stains from toilet tank?
You should also make sure to check inside the tank for brown stains, open the lid and add a cup of vinegar into the water and let it mix well.
How to clean a toilet seat with bleach?
Then apply a toilet cleaner under the toilet seat’s rim and allow it to soak for some time. Add bleach and disinfectant to a bowl of water, use a toilet brush to scrub, and wash down the bowl using the bleach and water solution. Clean the toilet’s exterior, wash your way up ...
How to get rid of a ring on the bottom of a toilet bowl?
Pour two cups of vinegar into the bowl to clear the ring formation at the base. For the stain under the toilet rim, make a paste of vinegar and salt or baking soda, and spread on the stains under the rim and every other part of the bowl. Leave the paste for about 6 hours and let it dry in.
Why is my toilet bowl brown?
Brown stains in the toilet bowl are caused by clogs of minerals compounds and rust in hard water. Rainwater meets with soft rock, like, calcium and other substances, and forms hard water. The high concentration of calcium, lime, iron, and manganese compound in the water at the toilet bowl base reacts to create iron oxide, otherwise known as rust.
How long does it take for toilet paste to dry?
Leave the paste for about 6 hours and let it dry in. Then wash off with hot water and flush. This process involves very little effort but takes a lot of time. If you are willing to try out a faster method, consider scrubbing off the stains using a toilet brush and an acidic cleaner.
How to clean a toilet
1. Most toilet bowl cleaners contain bleach, so you want to make sure your bathroom is well-ventilated by opening a window or door.
How to clean the toilet tank
Don’t forget to give your toilet tank some TLC as well. This won’t need deep cleaning as regularly as the toilet itself, but you should still check it every so often for signs of discolor or corrosion.
How to clean a stained toilet
If stains still remain in your toilet after all of this, there are a few more methods you can try. You can buy a limescale-focused toilet cleaner or one designed for urine stains, depending on your need.
How often should I clean my toilet?
Once a week is a good rule of thumb for cleaning your toilet, but you may need to do it more often if someone is sick or if your bathroom sees a lot of traffic. Remember to pay special attention to the handle and keep disinfectant wipes handy for that.
How to clean a toilet with vinegar?
Replace the tank cover. For particularly stained or foul tanks, turn the water valve off, flush the toilet until the tank is empty, and fill the tank with just vinegar (no water), letting it sit over night. Continue with step 5.
How to clean rust off toilet tank?
Wear rubber gloves. Remove the tank cover and place it gently on a towel on the floor. Without draining out the water, pour white vinegar into the tank, stopping at least an inch below the top rim. Let the vinegar-water solution sit for 12 hours to dissolve mineral deposits, rust, and mildew. Flush the toilet a couple of times to remove ...
How to get rid of vinegar in toilet?
Flush the toilet a couple of times to remove the vinegar from the tank. Turn off the toilet’s water valve, usually located near the floor. Flush the toilet again to completely drain the water from the tank. Using a scrub brush, clean the inside of the tank’s walls to eliminate gunk and buildup. Wipe down the metal parts with a sponge ...
How to keep toilet tank from rusting?
To avoid nasty buildup and extensive cleaning sessions, consider using drop-in tablets to help maintain your toilet tank and prevent the formation of mildew, rust, and bacteria, making it a lot easier to clean the next time around.
What causes a toilet tank to smell?
The inside part of the tank can harbor rust, mold, mildew, and bacteria that can cause unpleasant odors and impair your toilet’s functionality and longevity. If you don’t know how to clean the inside of your toilet tank, don’t fret. The job doesn’t take a lot of effort, thanks to everyday cleaners you’re likely to have on hand.
