how do you clean a very dirty porcelain tub

How to Clean a Porcelain Tub.

• 1. Mix 1⁄4 cup (59 mL) of white vinegar with 2 gallons (7.6 L) of water. Using a 5 US gal (19 L) bucket, combine 1⁄4 cup (59 mL) of white vinegar with ...
• 2. Wipe down the interior of the tub with a damp rag. Get the initial dirt and dust off from the surface of the tub before you go back in to do a ...
• 3. Dip a sponge into the vinegar solution and wipe down the tub. Saturate a sponge with the vinegar solution that you just mixed and wipe down the tub.
• 4. Rinse the tub with warm water. Let the vinegar solution sit in the tub and break down the rest of the dirt for 5 minutes. Once you're done waiting, ...

Full Answer

What is the best/easiest way to clean a bathtub?

The Easiest Way To Clean Your Bathtub Soap. Grab a bottle of dish soap and squirt some onto the bottom and sides of your bathtub. ... Scrub. Get the broom slightly wet, then use it to scrub the soap around the tub. ... Rinse. Finally, grab a cup, bucket, or your shower wand (if you have one), and use it to rinse all of the soap and loosened grime down ...

How to clean a porcelain tub with acetone?

• Combine 2 parts vinegar and 1 part water in a spray bottle and spray the entire bathtub. Allow this soaking solution to sit in the tub for 15-20 minutes. ...
• Use a cloth or sponge to remove the dissolved dirt and scum from the tub.
• Rinse the tub and use a microfiber cloth to remove excess paste or solution.

How to clean an old porcelain enamel bathtub or sink?

Method 1 Method 1 of 3: Doing a Basic Cleaning Download Article

1. Mix hot water and liquid dishwashing soap. Get out a small bucket and pour 2 tablespoons (30 ml) of gentle dishwashing soap into it.
2. Rub the cleaning solution over the entire tub. Dip a sponge or soft cloth into the soapy cleaning solution.
3. Rinse the tub with clean water. ...
4. Clean the enamel tub every week. ...

How to refinish an old bathtub?

The Process

• Clean and Remove. To prepare for refinishing, Ayers first carves away the caulk between the tub and the walls and floor with a putty knife, then removes the drain cover ...
• Fill Dings and Scratches. ...
• Apply Three Coats of Acrylic Urethane Enamel. ...
• Dry and Buff. ...

How do you deep clean an old porcelain tub?

How to Deep-Clean the Tub. Fill a bucket with warm water and add ammonia and baking soda to the liquid. Soak a cloth or sponge in the mixture and use it to scrub the tub — focusing especially on stained spots. Keep dipping the sponge, scrubbing and repeating until the tub is clean.

How do you clean tough bathtub grime?

Mix ½ cup bleach into about a gallon of water. Using a sponge, coat the tub's surface with the bleach and water solution and wait 5 minutes. After 5 minutes, scrub the surface with the sponge, paying special attention to the tougher stains. Rinse the tub with cold water, being careful not to splash the bleach.

How do you remove dirt and grime from a bathtub?

Fill a spray bottle with vinegar. Apply the vinegar liberally over the stained area. Wait about 20 minutes, then wipe away the stain with a sponge. Rinse with warm water.

How do I get my bathtub white again?

How to Clean and Get a Bathtub White Again in 7 StepsGather Your Materials. ... Microwave the Vinegar. ... Pour Dish Soap Over the Tub. ... Add warm vinegar. ... Add baking soda. ... Scrub that tub. ... Wipe down it down and rinse. ... Make sure you can ventilate your bathroom.More items...

Why is my bathtub so dirty?

Soap scum and grime can clog your drain and prevent easy drainage, which will then contribute to grime buildup around the edges of your tub where the water rises while you're showering. Prevent clogged drains and avoid pipe problems with our help!

How can I make my bathtub look new?

0:031:03How can I make my old tub look new? - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou know if your tub is damaged all the needs repair it can be made to look new again by having aMoreYou know if your tub is damaged all the needs repair it can be made to look new again by having a tub liner installed or having it refinished. But if you need a brand new tub.

Can bleach damage a bathtub?

Back to the question, “can bleach damage a bathtub?” Yes, it can. Bleach can add stains to your bathtub is misused. Remember, it is a massive chemical that, if not used correctly, can cause more harm than good.

What causes black stains in bathtub?

Stains in the bathtub can occur from either trapped water not allowed to dry properly, which forms mildew, or from mineral deposits created by hard water. Regardless of how they got there, you don't have to live with dark stains in your bathtub indefinitely.

How do I restore the shine to my porcelain tub?

Put the shine back in your porcelain sinks and bathtubs by giving them a good scrubbing with full-strength white vinegar, followed by a rinse of clean cold water. To remove hard-water stains from your tub, pour in 3 cups white vinegar under running hot tap water.

How do you remove yellow stains from porcelain tub?

If you have a porcelain tub, pour a little bit of Ajax or Comet directly onto the bathtub stain (enough to cover it completely). Add a little bit of water and scrub using the abrasive side of a sponge. If you rinse the affected area and you still see a stain, use a pumice stone to lift the remainder of the stain.

Can you use OxiClean on bathtub?

1:436:4211 AMAZING uses for OXICLEAN You'll Want to Know About!! (Genius ...YouTubeStart of suggested clipEnd of suggested clipSo right here i'm just creating a paste. And i like to do this in my bathtub as well especially ifMoreSo right here i'm just creating a paste. And i like to do this in my bathtub as well especially if there's a lot of soap scum. And grime my favorite parts for this is right in here.

How do I clean my shower that hasn't been cleaned in years?

2:045:48How To Super Clean a Shower (After 19 Years of Nothing Working...)YouTubeStart of suggested clipEnd of suggested clipAnd soak it in white vinegar and let it. Sit i'm so excited this spot has been soaking. Now actuallyMoreAnd soak it in white vinegar and let it. Sit i'm so excited this spot has been soaking. Now actually i did it overnight.

How do you clean a bathtub without scrubbing?

0:234:53GENIUS BATHTUB CLEANING TRICK!! (Never Scrub on your ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you want you can just take the whole bottle of dawn dish soap or whatever dish shop that you likeMoreIf you want you can just take the whole bottle of dawn dish soap or whatever dish shop that you like i like don it's a great degreaser.

How do I clean a tub?

Dip a sponge into the vinegar solution and wipe down the tub. Saturate a sponge with the vinegar solution that you just mixed and wipe down the tub. Scrub the sides and top of the tub and work your way down, eventually wiping down the tub basin .

How do I clean a porcelain enamel tub?

To clean a porcelain enamel tub, start by scrubbing any stains with hydrogen peroxide or equal parts ammonia and baking soda. Then, let the mixture sit on the stains for 5 minutes before washing it away with hot water and dish soap. Next, scrub the rest of the tub using a sponge and soapy water.

How often should I wash porcelain tubs?

You should wash your porcelain tub once a week.

How to get stains out of a bathtub?

Or, you can try two parts baking soda and one part hydrogen peroxide set on a stain for about 30 minutes. Use a clean cloth or sponge to scrub the salt mixture into the stain and remove it. Thanks!

What is the best way to remove yellow stains from acrylic tubs?

Community Answer. For yellow stains, use vinegar. For yellow stains and soap scum, vinegar will do the trick. This is the preferred bathtub stain remover, to use on the delicate surface of an acrylic tub.

How to make a soap solution for a bathtub?

Combine hot water with dishwashing soap. Combine 1 gallon (3.8 L) of water and 2 tablespoons (30 mL) of dishwashing soap and mix the solution together in a large bucket. Once the mixture starts creating suds, you can use it to wash down your tub. Wipe down your tub with the soap solution.

How do I clean a stained bathtub?

Wipe down your tub with the soap solution. Dip your sponge into the cleaning solution and cover the entirety of your tub, starting with the top and working your way down. Scrub harder on areas of your tub that are stained. Continue to soak your sponge in the solution and return to clean the tub.

How to clean a stained bathtub?

Fill a bucket with warm water and add ammonia and baking soda to the liquid. Soak a cloth or sponge in the mixture and use it to scrub the tub — focusing especially on stained spots. Keep dipping the sponge, scrubbing and repeating until the tub is clean .

What is porcelain tub?

If you’re the kind of person who loves vintage charm, you probably love porcelain tubs. Made of cast iron and covered with porcelain enamel, porcelain tubs are beautiful and luxurious. What’s more, they’re designed to be durable. However, over enough time and use, they tend to chip, crack and dull. In fact, if you use the wrong products on the tub, you can wind up damaging it even faster. This is why understanding the proper materials and methods for cleaning is so important.

How to get salt out of a carpet?

Or, you can try two parts baking soda and one part hydrogen peroxide set on a stain for about 30 minutes. Use a clean cloth or sponge to scrub the salt mixture into the stain and remove it. If this doesn’t work, leave the salt mixture on the stain for about an hour and retry with a little more lemon juice.

What materials can ding and chip porcelain?

When it comes to porcelain enamel, abrasive cleaners and materials can ding or chip the surface, making it even worse through the cleaning process. To avoid increased damage, here are a few materials to avoid: Scouring powder. White vinegar. Steel wool.

Can you use the wrong product on a tub?

However, over enough time and use, they tend to chip, crack and dull. In fact, if you use the wrong products on the tub, you can wind up damaging it even faster. This is why understanding the proper materials and methods for cleaning is so important.

Do porcelain tubs need regular maintenance?

Whether you’re talking about a vintage claw-foot tub that’s made of cast iron and coated with porcelain or a new model for which you’ve been the only owner, porcelain tubs need regular upkeep to keep it looking good. When you find an old one, it’s not uncommon for it to have dingy, dirty marks from years of use.

How to remove soap scum from tub?

Cleaning Process To Remove Soap Scum + Gunk From Your Tub + Shower. Spray or apply the cleaning product to the tub from top to bottom, covering every surface including the faucet and shower door. Let the product sit undisturbed for 10-30 minutes. Once the time has passed, start cleaning.

How to remove hard water stains from shower head?

Visit our friends at Women You Should Know for a full tutorial on how to remove hard water stains from a showerhead. Take off the showerhead and soak it in white vinegar for 3-6 hours or overnight. Then, scrub it with an old toothbrush.

How to keep showerhead from getting wet?

Wrap towels soaked in vinegar around the showerhead to keep it wet. You can use rubber bands to secure the towels in place. Rinse & wipe clean with a microfiber towel. Fill a small bag with vinegar and secure it to the showerhead, with the showerhead submerged in the bag.

How long to microwave vinegar and dawn soap?

You’ll need white or cleaning vinegar & dawn dish detergent + spray bottle | prepare a 50:50 mixture of warm vinegar & dawn soap in a spray bottle | simply warm the vinegar in the microwave for 1:30-2 minutes prior to mixing with the soap

Why does my shower door have a stain?

These unsightly stains are usually what mutes the shine of your faucet, showerhead, shower door & tub. These stains are caused by hard water – water with lots of minerals like calcium and magnesium.

Can you clean a dirty tub?

Cleaning a dirty tub can be a chore but if you follow this process, you’ll get a super clean tub with a minimal amount of sweat and tears! Use whatever cleaning products you like, just be sure to follow the step-by-step cleaning process and your bathtub will be Instagram worthy in no time.

Can you bleach a tub to remove rust?

Rust stains are actually pretty common and they are – thankfully – easy to remove from your tub. The one no-no when it comes to removing rust stains is to never use bleach! They may make your rust stains worse. Other than that, here are the simple steps you need to follow to get rid of those red stains.

How to remove stains from tub?

If a stain persists after cleaning, you may need to spot clean the surface. Minor stains may be removed using cream of tartar and a mix of water or hydrogen peroxide. Fill a bowl with cream of tartar. Slowly add the water or hydrogen peroxide to make a thick paste.

How to get a stain out of a bathtub?

The baking soda is an abrasive, so be sure to mix it and dilute the paste well to keep from scratching the tub surface. Apply it to the stain in a circular motion , being careful not to use too much pressure that might grate on the finish or damage it. Let the paste dry, then rinse it and wipe away with a clean a rag.

How to make porcelain shine?

After you do a light cleaning, you can make the porcelain finish shine by dabbing a light coat of lemon oil onto the sides of your tub with a clean rag. Be sure not to put the oil at the bottom of your bath as it can make the surface slick and dangerous, particularly when wet.

How to get rid of rust on a kitchen counter?

If cleaning with lemon juice doesn’t knock out the problem, another trick is to cut a lemon and dip a piece in a tray of salt. Next, apply the salt and lemon combination to the rust stain just as though it were a sponge.

Why is porcelain bad for old tubs?

This is especially true for older tubs and showers because the enamel might not be as acid and alkaline resistant as newer tubs. This reduced resistance means your old bathtub could be more susceptible to staining.

How to prevent porcelain enamel from staining?

You can reduce the chances of your porcelain enameled bathroom fixture staining by drying the bottom and sides with a clean, soft rag after each use and cleaning. As you get ready to clean this bathroom centerpiece, you need to be sure to avoid chipping the porcelain.

Can you clean a porcelain enamel tub?

Obviously, you need to clean your tub, but there are a few cleaning methods you want to avoid. Porcelain enamel is applied like glass and fused to a cast-iron structure, a process that leaves it susceptible to dings or scratches. It might be useful to think of cleaning a porcelain enamel tub in much the same way as you would clean a mirror or a window. It can be scratched and damaged, so the chemicals used should be non-abrasive and chosen with care.

How to clean porcelain?

Don the gloves, and soak a sponge in hot water. Wipe down all porcelain surfaces, and put a bit of pressure behind your wiping to clean away stains. Use the cloth to dry the porcelain. The porcelain should wipe clean without too much trouble.

What is the best way to clean porcelain?

Baking soda, like vinegar, is one of your best friends when you need a DIY porcelain cleaner. Baking soda has chemical cleaning properties and is also a mild abrasive, which is just what you need to get your porcelain bathtub and porcelain kitchen sink shining.

How to clean porcelain with baking soda?

Sprinkle the baking soda on any porcelain stains, and spray the porcelain down with the lemon juice solution. Let the lemon juice mixture sit for about five minutes. Respray the enamel, and use the sponge to scrub away any stains. Rinse the porcelain with water when you finish cleaning.

How to get stains out of porcelain?

Sprinkle baking soda on any stains on your porcelain, and then spray the porcelain with vinegar. Let the solution work on the stains for about five minutes. Give the enamel another spray, and use the sponge to scrub the stains away. Rinsing is needed after you clean to deactivate the vinegar.

How to clean porcelain with peroxide?

Don the gloves, and pour the peroxide and water into a spray bottle. Spray down all the porcelain, and use your sponge or a mop, depending on the area, to scrub it clean. Rinse the peroxide solution off the porcelain with fresh water when you finish cleaning and dry.

How to clean porcelain with bar keepers friend?

To clean porcelain, pour a little Bar Keepers Friend on stains. Let the cleaning liquid sit for a few minutes and use a clean cloth to wipe away any stains. We hope you had a fantastic time learning about cleaning porcelain.

Can you use essential oil to clean porcelain?

Folks looking for how to clean porcelain easily should give recipes with essential oil a shot. This recipe not only utilizes essential oils to clean your porcelain but also includes vinegar for extra cleaning power. Try this method for a cleaner that smells as good as it cleans. tb1234.