The answer is the number of sq yards that one ton will cover at the specified depth. To apply this rule to the example above, divide 3 into 18 and you get 6 sy per ton at 3 inch depth. Pretty close.
Full Answer
How do you convert tons to square yards?
Knowing the density, you can convert from tons, to a volume such as cubic yards. Then, to convert to square yards, you'd need to know one more dimension, such as the height.
How do you convert tons to units of volume?
To convert tons to a unit of volume, you would need to know the density of the substance. If you let me know the substance, I may be able to look it up. Knowing the density, you can convert from tons, to a volume such as cubic yards. Then, to convert to square yards, you'd need to know one more dimension, such as the height.
How do you calculate the mass of a tonne?
We spell it tonne. Anyway, you need the bulk density of the material. If the density is in T/m3, then you take the number of cubic metres and multiply it by the density to get the mass in tonne.
How much is 2 tons NEET in pounds?
So 2 tons times 2,000 pounds divided by 36 inches equals +/- 111.11 pounds per inches of depth per square yard. So take 3.5 sqyds times the depth say 6 inches times 111.11 pounds per inche to equal 2,333.31 pounds divided by 2,000 pounds per to equals 1.1667 tons neet. We need to add some waste to make sure we have enough.
How many Sy are in a ton of asphalt?
There are approximately 0.5 cubic yards in a ton of asphalt. 1 cubic yard of asphalt weighs around 4,050 pounds and 1 ton of asphalt weighs about 2,000 pounds, so, number of yards of asphalt in a ton = 2000 ÷ 4050 = 0.5 yards approx. Thus, there are 0.5 cubic yards in one ton of asphalt.
How do you convert tons to yards?
To convert Tons to Cubic Yards*: Tons ÷ 1.4 = Cubic Yards.
How many square yards are in a ton of stone?
The number of cubic yards in a ton of gravel = 2000/ 3000 = 0.66 cubic yards. Hence, there are 0.714 cubic yards in 1 ton of gravel.
How do you convert asphalt tons to cubic yards?
If you are looking to calculate the asphalt weight per yard, Willie's Paving notes that 1 cubic yard of hot asphalt mix weighs 2.025 tons. If you are calculating yards to tons of asphalt, multiply your cubic yard value by 2.025 tons to determine the project's amount.
How many yards of dirt is in a ton?
How much is a ton of soil? A ton of condensed soil is typically about 0.750 cubic yards (3/4 cu yd), or 20 cubic feet.
How many yards are in a ton of sand?
Dry Sand Gravel and sand have a density of 100 lb/ft3 in SI unit it comes around 1601.85 kg/m3. As a consequence, one yard of sand weighs 1.35 tons. So, in one ton of sand it contains 0.62 cubic yards of sand. So, in one ton of dry sand, it contains 0.74 cubic yards of dry sand.
Is a cubic yard the same as a ton?
A cubic yard is a measure of volume while a ton is a measure of weight. The volume of the space you need to fill will always be the same, but the total weight of the materials you need will vary by the material. For example, a cubic yard of crushed rock is lighter than a cubic yard of topsoil.
What area does a ton of gravel cover?
14 square metresTherefore if you wish to apply them at a 50mm depth (the normal depth for a driveway) one tonne will cover 14 square metres. For pedestrian pathways, 35mm is normally sufficient in which case 1 tonne will be sufficient to cover approximately 20 square metres.
How many yards is 9 tons of gravel?
6 tons of gravel = 0.714 ×6 = 4.284 cubic yards, 7 tons of gravel = 0.714 ×7 = 4.998 cubic yards, 8 tons of gravel = 0.714 ×8 = 5.712 cubic yards, 9 tons of gravel = 0.714 ×9 = 6.426 cubic yards and 10 tons of gravel = 0.714 ×10 = 7.140 cubic yards.
What is the formula for calculating asphalt?
1:114:56How to calculate quantity of Asphalt - YouTubeYouTubeStart of suggested clipEnd of suggested clipThat how much weight a first fault has been used in this flexible payment so it is equal to theMoreThat how much weight a first fault has been used in this flexible payment so it is equal to the weight of asphalt is equal to the volume of asphalt multiplied by the density of us fault.
What does 1 cubic yard of asphalt weigh?
Solid asphalt weighs slightly less at 3,960 pounds per cubic yard. However, broken concrete and asphalt weighs closer to 2,025 pounds (~1 ton) per cubic yard, or 75 pounds per cubic foot, when disposed of in a dumpster due to the amount of empty space.
How do I calculate asphalt tonnage?
How to Calculate Asphalt Tonnage – 5 Simple StepsStep 1: Measure your pathway.Step 2: Convert the measurements to feet.Step 3: Multiply the measurements to cubic feet.Step 4: Multiply the weight density of asphalt with the volume figure.Step 5: Covert the amount to tons.
How much is 1 yard in tons?
Cubic Yard to Ton Register Conversion TableCubic Yard [yd^3]Ton Register [ton Reg]1 yd^30.27 ton reg2 yd^30.54 ton reg3 yd^30.81 ton reg5 yd^31.35 ton reg7 more rows
How many tons is in a cubic yard?
Cubic yards × 1.4 = US tons (approx). To get a more accurate conversion, you'll need to involve a density figure in your calculation. This is because the cubic yard is a unit of volume and the ton (or tonne) is a unit of weight.
What is the difference between a yard and a ton?
A cubic yard is a measure of volume while a ton is a measure of weight. The volume of the space you need to fill will always be the same, but the total weight of the materials you need will vary by the material. For example, a cubic yard of crushed rock is lighter than a cubic yard of topsoil.
How many yards is 24 tons?
How many yards is 24 tons:- 16 cubic yards is 24 tons of gravel, or stone, or rock, or #57 gravel, or 3/4″ pea gravel. For estimating purpose a ton of gravel yields approximately 0.66 cubic yards, so number of cubic yards are in 24 tons of gravel = 0.66×24 = 16 cubic yard.
How many Cy is 10,000 Sy?
If you're making a gravel drive or lot, let's say 4 inches (1/9th yard) that means that your 10,000 sy is actually about 1100 cy. at 103 lb per cubic foot, you're looking at about 1550 tons.
How to calculate cubic yards?
Once you have volume (in either cubic yards or cubic feet) you can use your density above for conversion. If you have thickness in inches, 36 inches = 3 feet = 1 yard. Divide inches of thickness by 36 to get yards, multiply by square yards of area.
How thick is a ton of asphalt?
The density of asphalt is generally given at 140 lbs per cubic foot (I have assumed you would like this in imperial as you use feet) At that density a ton ( 2240 lbs) is 16 cubic feet so it now comes down to how thick you want the coating, at 1 inch thick the ton will cover 12 x 16 (192) square feet.
How many cubic yards of asphalt is 5000 cubic feet?
Asphalt is generally paid for in cubic yards or tons. 5000 cubic feet is 185.2 cubic yards (multiply times 1 cubic yard per 27 cubic feet). In order to compute tons, you will need to know the density of the asphalt. It will vary based on the mix design.
How to calculate how many tons of asphalt needed?
First, you need to obtain the square measurement using a tape measure. Second, you determine the dimension of the yard in cubic meters and multiply by the depth. Third, you get the volume of the yard and multiply by the density and then change ...
How much does a yard of asphalt weigh?
1 cubic yard of hot asphalt mix weighs 2.025 tons or 4050 lbs. These measurements are an approximation and therefore when you are ordering the quantity ensure that you add more asphalt to gather for the waste and you don’t run short as you do your pavement project.
Square foot
Definition: A square foot (symbol: sq ft) is a unit of area used in the imperial and US customary systems (UCS). It is defined as the area of a square with one-foot sides. One square foot equals 144 square inches.
Square yard
Definition: A square yard (symbol: sq yd) is a unit of area in the imperial and United States customary systems of units, defined as the area of a square with one-yard (3 feet, 36 inches, 0.9144 meters) sides.