How to Copy a Curve Shape into Wood
- Use a pencil to trace the outline of the curve onto a piece of wood
- Cut out the shape using a scroll saw or jigsaw
- Smooth the edges of the cutout with sandpaper
- Apply a thin layer of wood glue to one side of the curve and press it onto the wood surface
Full Answer
How to duplicate curves on a bandsaw?
How to draw an ellipse?
Do you need fancy equipment to turn away from straight lines?
Can you buy a set of four French curves?
See 1 more
About this website
How to Cut Curves in Wood (DIY) | Family Handyman
Mark, cut and fine-tune curves in wood, using routers, saws and other simple tools, by following these expert techniques to get the best curves.
Step 2: Insert Sticks
Next, cut a strip of the corrugated cardboard and stick the bamboo skewers through the grooves/holes/openings of the cardboard. Note: This picture shows a skewer through every other hole but the resolution could probably be doubled by inserting one in each hole.
Step 3: Use!
Then, position that funky tool you have fashioned over the compound curve you want to duplicate, and gently push on the skewers until they just touch the surface. Hold the cardboard level.
Step 4: Trace
Here's a look at the other side. Once you have captured the shape of the curve (s), all you need to do is to trace it on another piece of cardboard and test fit. Then, transfer the shape on the material of your choice and cut away. PS# You can use drinking straws instead of skewers for delicate surfaces, too. Again, thanks to Mr.
How to duplicate curves on a bandsaw?
If you need to duplicate this curve on the other half of a workpiece, cut out the pattern with your bandsaw. Trace the pattern at one end of the workpiece, flip the pattern over, and trace the other end, as shown in the inset.
How to draw an ellipse?
Here's a neat way to draw an ellipse for tabletops, trays, and the like. Use a square to mark intersecting perpendicular lines on pattern material, such as a piece of medium-density fiberboard. Place pushpins on the long axis, equal distances from the centerpoint.
Do you need fancy equipment to turn away from straight lines?
You don't need fancy equipment to turn away from straight lines.
Can you buy a set of four French curves?
You can buy a set of four French curves, covering a wide variety of shapes. Rely on a flexible curve to create the exact shape you have in mind , as shown here, or use it to transfer curves from plans or existing pieces. A plastic surface encloses a lead core, which holds almost any shape.
How to duplicate curves on a bandsaw?
If you need to duplicate this curve on the other half of a workpiece, cut out the pattern with your bandsaw. Trace the pattern at one end of the workpiece, flip the pattern over, and trace the other end, as shown in the inset.
How to draw an ellipse?
Here's a neat way to draw an ellipse for tabletops, trays, and the like. Use a square to mark intersecting perpendicular lines on pattern material, such as a piece of medium-density fiberboard. Place pushpins on the long axis, equal distances from the centerpoint.
Do you need fancy equipment to turn away from straight lines?
You don't need fancy equipment to turn away from straight lines.
Can you buy a set of four French curves?
You can buy a set of four French curves, covering a wide variety of shapes. Rely on a flexible curve to create the exact shape you have in mind , as shown here, or use it to transfer curves from plans or existing pieces. A plastic surface encloses a lead core, which holds almost any shape.
