how do you cover a lamp base with fabric

1. Cut your Fabric. The most important thing is the cut. ...
2. Dry Fit the Fabric to the Lampshade. Line the seam of the lampshade with the edge of the fabric and “dry fit” the fabric around the lampshade to ...
3. Attach the fabric to the top with hot glue. ...
4. Secure the top all the way around to the seam. Make sure that the fabric seam overlaps.
5. Attach the fabric to the bottom with hot glue. ...
6. Secure the seam. Take your fabric where it meets the seem and fold lightly over itself, then hot glue the seam from top to bottom, pressing firmly.
7. Start your velvet trim at the seam and secure it with a dot of hot glue. ...
8. Tidy up the interior. Tidy up the interior excess fabric by securing with more hot glue and trim any hot glue strings that may have come off in ...

Full Answer

How do you cover a lamp base?

Cover the base with fabric and add ribbon or trim around the perimeter to give the lamp a finished look, or add fabric to select parts of the base. If the base has several curves, you may want to add fabric to one central area or the bottom of the lamp.

Can you cover a lamp shade with fabric?

Adding a fun fabric to a lampshade creates a great focal point to the room. Match the fabric of your favorite pillow or complement the lamp base for a bold look. Totally customizable and original- this project is a way to put your mark on a room!

How do you dress up a lamp base?

0:001:26How to Make and Decorate a Lamp Shade - DIY Tips and Ideas from ...YouTubeStart of suggested clipEnd of suggested clipStart from the seam of the shade. And use a hot glue gun to set it in place decorative items such asMoreStart from the seam of the shade. And use a hot glue gun to set it in place decorative items such as yarn fabric flowers beads can be hot glued in. Place. You can also use markers or paint on a shade.

How do you attach fabric to a lampshade frame?

Squirt a thin, 2-inch-long line of glue on the inside top edge of the lampshade frame. Place the top cut piece of lampshade fabric against the frame, near the unfolded side edge of the fabric, and press the top 1/2 inch of fabric over the frame and into the hot glue.

What fabric can I use to cover a lampshade?

Cotton is a popular lampshade fabric that is easy to clean, and it drapes and gathers well, lending itself to pleated and decorative lampshades. Cotton fabrics come in an almost endless variety, but one of the best choices for lampshades is soft-touch cotton.

How do you cover a lampshade with fabric strips?

Strip old material off of the lampshade, leaving just the metal frame. Cut fabric into 1-inch-wide strips. Starting at top, tie a strip of fabric to the top corner of the frame. Wrap the strip around the metal to cover it, tying off on a vertical frame support at the end of the strip.

How do you make an old lamp look modern?

STEP 1: Grab an Ugly Lamp. ... STEP 2: Strip the Lamp Shade. ... STEP 3: Remove the Old Bulb. ... STEP 4: Get Some Gorgeous Paper (or Fabric) ... STEP 5: Trace a Lamp Shade Pattern. ... STEP 6: Cut Your Paper or Fabric. ... STEP 7: Use Spray Adhesive to Glue Paper to Lamp Shade. ... STEP 8: Paint the Lamp Base.More items...

How do you modernize a lamp?

10 stylish ways to update a lamp...Easiest and most popular, recover the shade. ... Paint or gold leaf the inside of the shade. ... Paper or fabric on the inside of the shade. ... Recover the base with something unusual. ... Embellish the base by adding hardware. ... Spray paint the shade and base the same color.More items...•

How do you decorate an old lamp?

3:4910:19HOW TO TURN AN OLD LAMP INTO A SHOWROOM STYLE LIGHTINGYouTubeStart of suggested clipEnd of suggested clipAfter attaching all of them to one hoop this is what it looks like and now I attach them to theMoreAfter attaching all of them to one hoop this is what it looks like and now I attach them to the second hoop and then I have my curve I took it out and spray painted it silver and kept it aside.

How do you update a lamp shade?

0:043:46Upgrade Your Lampshade (DIY) - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo let's take this lamp put it away and we're gonna get you can either use wallpaper you could useMoreSo let's take this lamp put it away and we're gonna get you can either use wallpaper you could use wrapping paper I really like to use wallpaper because it comes in really nice colors.

How do you cover the inside of a lampshade?

0:282:41Adding A Material to The Inside of An Existing Lampshade - YouTubeYouTubeStart of suggested clipEnd of suggested clipStarts to sort of fall or relax if it's a fabric. So here's an example linen or a silk fabricMoreStarts to sort of fall or relax if it's a fabric. So here's an example linen or a silk fabric because of its natural fiber. Will over time start to want to Sag.

How do you cover an existing lamp shade?

Roll shade along fabric, cutting two inches above and below edges of shade.Measure and Cut Lampshade Fabric. ... Wrap Fabric Around Lampshade. ... Glue Fabric to Lampshade. ... Wrap Fabric Around Lampshade. ... Fold Excess Fabric and Mark Fold Line With Fabric Pen. ... Cut Excess Fabric. ... Fold and Tuck Fabric Edges. ... Glue Fabric Edges Into Place.More items...

How do you cover a lampshade with new fabric?

0:137:21How to Recover a Lamp Shade with Fabric - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll you need for this project is an old lampshade about a yard of fabric. Probably less a rotaryMoreAll you need for this project is an old lampshade about a yard of fabric. Probably less a rotary cutter with a cutting mat is that's what we're going to use today but you can just use scissors a spray

How do you redo a lampshade?

0:333:05How to Re-Cover a Lampshade - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe shade near the bottom of the paper's edge. Step 3 trace the bottom and top edge of the shadeMoreThe shade near the bottom of the paper's edge. Step 3 trace the bottom and top edge of the shade with your pencil slowly rolling the shade as you go until you get back to the scene.

What can you do with old lamp shades?

Whatever you decide, you can readily spruce it up with some spray painting.Perfect DIY Lamp Shade Sunburst Mirror. ... Great DIY Brass Lamp Makeover. ... DIY Broken Upcycling Lamps Cake Plate Idea. ... Cool Upcycled Utensil Table Lamp. ... Affordable Upcycled Lamp Embellishment Stand. ... Birdcage Lamp Potted Plant Holder.More items...•

DIY Lamp Base

Here’s what you’ll need for both projects, and I’ll show you what to do with the lamp base first.

TV Cabinet Makeover

Here is the best before picture I have: I know, what kind of a blogger doesn’t have before pictures? But this way you get to see my cute little boy too.

What Materials Do You Need?

Here is the list of things you need to make a cover and a lining for your lampshade.

Getting the Frame Ready for Work

It doesn’t make much sense when you think about sewing on a metal frame, does it? You need a proper base to sew on. And for that, we have the cotton tape.

Right Measurements

Adhesive styrene is usually used for lining in commercially made lampshades. But any white cotton fabric would do, considering your bulb won’t heat up like the sun or suddenly catch on fire.

How to Cut the Patterns Perfectly?

Take the fabric you chose for the upper cover and fold it into two layers.

Getting the Pieces Ready for the Frame

It would help if you had your fabric pieces face to face when sewing them together so that the seam is on the inside.

Stitching the Final Pieces to the Frame

Let’s begin by sewing the outer cover first. Put on the outer cover to the frame and attach it with just enough pins on top and bottom so that it holds firmly. Tap your fingers onto the fabric to make sure it is taut.

Giving the Finishing Touch

Time for applause! You are almost at the end of making your first lampshade cover. And boy, does it take some patience to come this far!

How to attach fabric to a lamp base?

Once again, hot glue is one of the best ways to attach fabric to your lamp base. Cover the base with fabric and add ribbon or trim around the perimeter to give the lamp a finished look, or add fabric to select parts of the base.

How to secure ornaments to lamp base?

Hot glue is one of the most effective ways to secure ornaments and embellishments to your lamp base. Depending on the diameter of your base, you can apply a few ornaments to create a pattern or cover the entire base with embellishments.

What does an upgraded lamp base do?

An upgraded lamp base can make an old furnishing look like a contemporary masterpiece, saving you money so you don't have to purchase a new one. A decorated lamp base can make your lamp a focal point in your overall room design.

Can you spray paint a lamp base?

Once you wipe the lamp clean, removing leftover sand and dust, you can spray paint the base. Mask off the cord and hardware with painter's tape and remove the lamp shade, so you don't accidentally get paint on those parts of the lamp.