how do you crochet a broomstick lace afghan

Ultimate Beginner's Guide to Broomstick Lace Crochet

Full Answer

How to crochet a broomstick lace?

Broomstick lace is worked from left to right so you need to single crochet back across the foundation row to get back to the left side and begin the pattern. Single crochet into the second chain from the hook and each chain across for a total of 20 sc. Insert your crochet hook into the first sc on the left side of the row.

What size starting chain do I need for Broomstick lace?

You can use any length of starting chain that you want when working with broomstick lace (or whatever your crochet pattern calls for). If you want to create 10 clusters of 4 loops each then you'll need a starting chain that will hold 40 broomstick lace loops.

How do you use a broomstick hook?

Instructions: 1 Step 1: At beg of row, remove hook from lp and draw it up and onto the broomstick end, insert hook in next st and draw... 2 Step 2: Remove 4 lps from stick, YO and pull through, ch 1, 4 sc in loops. More ...

How to crochet a crochet crochet hook?

With the knitting needle held to the left, slip the last loop on the hook onto the needle (counts as first loop). Moving from left to right across the row of regular crochet, skip the first single crochet and *insert the hook through both loops of the next single crochet, yarn over and draw up a loop.

How do you crochet a broomstick lace?

1:018:50How to Crochet Broomstick Lace Step-by-Step - YouTubeYouTubeStart of suggested clipEnd of suggested clipGo ahead and make a foundation row of just single crochet stitches. When you get finished with thatMoreGo ahead and make a foundation row of just single crochet stitches. When you get finished with that pull up on the last loop and feed that on your needle. Then insert your hook into the next chain.

How much yarn do I need for a broomstick lace Afghan?

1" diameter broomstick, dowel or giant knitting needle. Yarn: Lion Brand Homespun Yarn: 54 to 60 ounces.

How do you crochet a hairpin lace?

1:156:15Learn to Make Hairpin Lace with Red Heart Yarns - YouTubeYouTubeStart of suggested clipEnd of suggested clipAround the loom and then instead of crocheting into the last stitch you worked we're going toMoreAround the loom and then instead of crocheting into the last stitch you worked we're going to crochet into the top loop on the left side of the loom. So then we're going to pull up a loop and then.

What is a broomstick lace tool?

Broomstick lace is a unique crochet stitch. The design is made by using a crochet hook to pull tall loops of thread up on to a dowel (historically, a broomstick, which is where the name comes from).

How many loops does a hairpin lace Afghan have?

The Crochet Hairpin Lace Baby Blanket has been in my sights for years. It is actually 20 stripes that are joined together and the outside edge is just braided. There is no crocheting required on the side loops of any of the strips. The number of loops uses to join the strips together is only 4.

Can you crochet lace?

Absolutely! Crochet lace is something that even beginners can make. As long as you can work the basic crochet stitches, especially double and treble crochet, you can make crochet lace. If you want the traditional fine mesh lace you will need to work with fine thread and very small crochet hooks.

What is a hairpin crochet staple?

Hairpin lace is a beautiful variation on crochet, in which you combine a standard crochet hook with a certain type of loom to create lacy, openwork designs. Once you've seen hairpin lace, you will always immediately recognize it, because it has a very unique appearance that never fails to catch the eye.

How do you crochet a Tuscan?

4:035:52HOW to TUNISIAN CROCHET for BEGINNERS - YouTubeYouTubeStart of suggested clipEnd of suggested clipInsert through the loops. Yarn over and draw up a loop. And again continue with this across the row.MoreInsert through the loops. Yarn over and draw up a loop. And again continue with this across the row. The return pass is the same as before one loop off on the edge.

How do you crochet a filet?

14:5520:39How to Filet Crochet | 3 Methods + Troubleshooting - YouTubeYouTubeStart of suggested clipEnd of suggested clipStraight forward same as we did open blocks at the beginning chain two skip two stitches. And thenMoreStraight forward same as we did open blocks at the beginning chain two skip two stitches. And then work a treble. Into the third stitch and then one. Two. Again skip two stitches.

How do brooms fly in Harry Potter?

From the descriptions of flying in the series, it appears that the key to using a broom is balance. The way you balance on the broom controls the direction in which it will fly, shifting your weight forward will bring the handle down and so make it descend.

How do you finish the ends of hairpin lace?

1:552:55How To: Hairpin Lace - Finishing Ends with Tassles (Part 5) - YouTubeYouTubeStart of suggested clipEnd of suggested clipI'm using for my fringe fold it in half loop. It over pull it through take my yarn tail or my yarnMoreI'm using for my fringe fold it in half loop. It over pull it through take my yarn tail or my yarn and from my strip hold on a second here.

How do you do a hairpin?

0:537:14How To: Hairpin Lace - Basic Strip (Part 1) - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd that's so that your loops that you create are equal on both sides. So you want to take your yarnMoreAnd that's so that your loops that you create are equal on both sides. So you want to take your yarn and wrap. It around to the back. So I'm just going to wrap mine around to the back. So I have this.

How do you crochet a Tuscan?

4:035:52HOW to TUNISIAN CROCHET for BEGINNERS - YouTubeYouTubeStart of suggested clipEnd of suggested clipInsert through the loops. Yarn over and draw up a loop. And again continue with this across the row.MoreInsert through the loops. Yarn over and draw up a loop. And again continue with this across the row. The return pass is the same as before one loop off on the edge.

How do you use a hairpin lace tool?

0:423:17Hair Pin Lace Tool - YouTubeYouTubeStart of suggested clipEnd of suggested clipCome up through your loop on the left. Side get that thread pull it through single crochet push itMoreCome up through your loop on the left. Side get that thread pull it through single crochet push it down a little bit reverse your hook twist. Come up through the two loops.

How many rows are there in a broomstick lace pattern?

In some patterns, the broomstick lace rows will be written as two rows in the pattern, one for each pass.

What is the return pass on a broomstick?

The Return Pass is where the variations typically occur. Note that in many broomstick lace crochet patterns, the Loop Pass is worked in the back loop only; however, in the Spring Lace Infinity Scarf, the Loop Pass is worked under both loops. At the end of the previous row, do not turn.

Where do you insert hooks in a row?

Starting on the right side of the row, insert your hook into the first loop,

Do you turn the knitting needle at the end of a row?

At the end of the previous row, do not turn. With the knitting needle held to the left, slip the last loop on the hook onto the needle (counts as first loop).

What is a broomstick afghan?

Broomstick Afghan. Broomstick crochet is a unique crochet technique worked with a crochet hook and a broomstick or giant knitting needle. The giant needle means this broomstick afghan works up quickly and easily.

How to make a broomstick a st?

Instructions: Step 1: At beg of row, remove hook from lp and draw it up and onto the broomstick end, insert hook in next st and draw up lp, remove it from hook and loop it over broomstick. Continue until all sts have lps drawn over broomstick. Step 2: Remove 4 lps from stick, YO and pull through, ch 1, 4 sc in loops.

What is the foundation row of a stitch?

Foundation Row: Ch 125 (or any multiple of 4 plus 1 to obtain desired width). The multiple can be varied to make smaller or larger stitch patterns.

What is broomstick lace?

Broomstick lace is a unique style of crochet that allows you to create an interesting lacy design. It uses the same basic techniques as regular crochet. In fact, it only requires knowledge of the single crochet stitch. However, the introduction of a new tool, the tool you crochet around, creates a unique final effect. You use a crochet hook to pull loops onto a knitting needle or large crochet hook, then group the loops to create the lace effect. This example shows a starting chain of 20 stitches grouped in sets of four loops.

How many broomstick loops are there on a needle?

20 broomstick lace loops on a needle.

How to group stitches on a knitting needle?

Begin to group the stitches: Insert your hook through the top of the first four loops on the end of the knitting needle. Yarn over and pull the yarn through to close the set.

What do you need to make lace?

Just like any other crochet project you'll need yarn and a crochet hook. The only other thing you need is a large knitting needle, an oversized crochet hook or some other round surface to hold the loops of your lace. Traditionally a broomstick was used, hence the name "broomstick lace" Please see the last slide for an itemized list of tools and materials.

How many crochets are there in a gathered stitch?

Crochet four single crochets in the space for the gathered stitches. Repeat between each set of grouped stitches. Note: if you are grouping a different number of loops in each section, crochet the same number of single crochets as the number of loops in the group.

How to make a slipknot?

Form a slipknot: create a loop with the yarn, insert your hook through the loop and grab the tail of the yarn to close the knot onto the hook.

Is it easier to knit broomstick lace?

There is a learning curve to adjust to the process of pulling loops up onto the knitting needle. It gets easier as you work the broomstick lace stitch pattern.

How to crochet broomstick lace?

Some people don't want to start their broomstick lace with a row of single crochet. You can work your first row of loops into the starting chain instead. Here's what you will do differently from above: 1 Do not "add 1" to the initial starting chain. If you want a chain of 20 broomstick lace loops then crochet a starting chain of 20. 2 When you reach the end of your starting chain, pull your I hook out of the work. 3 Re-insert your I hook into the first chain of the starting chain on the left side. Draw up your loop and begin your first row of broomstick lace as described in the original instructions above.

How many loops are in a broomstick lace crochet pattern?

However, you can make clusters of any size. It is common for broomstick lace crochet patterns to use 4-6 loops per cluster. The only difference to the instructions is that you must make sure that your sc chains match the number of loops per cluster.

How to change the lace on a broomstick?

You can change the effect of the broomstick lace by altering the height of the crochet stitches. Shorter stitches will have a denser appearance whereas taller stitches will have a more openwork design. You can pull the loops up as tall as you want, although it's standard for loops to be somewhere between one half inch and two inches in height. The best way to get taller loops is to use a thicker dowel (or hook or broomstick) to hold your loops.

How many stitches are in a broomstick lace pattern?

Take a look at your work now and you will see that you have 20 sc stitches sitting on top of the first row of broomstick lace. You will now repeat Steps 3-7 to create as many rows of broomstick lace as you want for your pattern.

How to remove I crochet hook?

Remove your I crochet hook from the work, holding the existing loop on the Q hook or dowel. Insert the I crochet hook into the second sc from the left.

How many loops are there in a broomstick lace?

In this section we will look at how to crochet broomstick lace in which five clusters of four loops each are worked in each row. The samples shown here were made using Red Heart yarn and an I-9/5.5mm crochet hook. The loops are pulled up on to the back end of a size Q plastic crochet hook; alternatively you could use a dowel, knitting needle or even a broomstick.

What size needle is used for broomstick lace?

See Kathleen Sams' Broomstick Lace crochet video for an example of how a Size 50 Knitting Needle is used to hold the loops and create taller broomstick lace.

What is a broomstick blanket?

The Broomstick Lace Baby Blanket is a beautiful crochet pattern with a textured design. The unusual and repetitive stitching is fun to make as you use a knitting needle and a crochet hook in basic single crochet and double crochet stitches. Scroll down for the free crochet pattern.

What size crochet hook should I use for a blanket?

I chose a larger crochet hook in size “J” or 6.0 mm, and a large knitting needle in size “50” or 25.0 mm to make this blanket. It works up rather quickly with the thicker yarn and larger size tools.

How to do round 1 stitch?

Round 1: (RS facing throughout) sc in corner (place stitch marker), rotate to work along side edge in ends of rows, 1 sc in end of next 3 rows, *ch 3, skip cluster, 1 sc in sc, 2 sc in dc, 1 sc in sc*, Repeat *-* to corner, place 2 sc in corner, sc in each st across bottom. Repeat along other side edge and across top, back to stitch marker or beginning of Round. Move stitch marker up each Round.

How many stitches are in a broomstick lace stitch?

NOTE: The first full broomstick lace stitch of every row is the only one with 6 stitches- in this pattern. All others will have 5sc each. Stitches should be loose enough they don’t cinch the yarn.

How many loops do you need to fib a broomstick?

NOTE: If you do not have 130 loops, you may fib it by crocheting together more or less loops. You do not have to pull your work out. There were at least 3 rows in my blanket that were only 4 loops instead of 5. As long as you have 130 loops on your broomstick the next time around, it will look gorgeous.

How to use a ch130 chain?

R1: ch130, loop the last chain onto broomstick. Start with the next chain, insert hook under back bump and pull up a loop- like you have flipped your chain over- not under both loops. Slide that loop onto your “broomstick”.