how do you decoupage on slate

How to Decoupage on Slate

• Step 1 Dip a cotton ball into rubbing alcohol and rub it over the slate to remove oils, dirt and to help evaporate any moisture. ...
• Step 2 Apply an even layer of latex paint to the slate with a paintbrush. ...
• Step 3 Cut a decorative image from paper, with scissors, to use as a decoupage image.
• Step 4 ...
• Step 5 ...
• Step 6 ...

Full Answer

Does Modge podge work on slate?

When decoupaging on slate, we used glue to paste down the magazine images and then covered it with a thin coat of Mod Podge. Yes, you can use a glue and water mixture for the cover, BUT if it's not the correct ratio, you'll get too wet or too clumpy. The Mod Podge is a bit expensive but a little goes a long way.

How do you seal slate coasters?

How to Seal Slate Coasters. To be safe, I will seal these slate coasters before using to protect them! I will use at least three coats of matte Mod Podge to seal and keep the writing looking good. If you don't want to use Mod Podge, you could also use a matte polyurethane.

How do you make a slate coaster?

Slate CoastersStep 1: Mark Out Slate. Use a ruler and a stick of chalk to mark your coaster.Step 2: Cut Slate. ... Step 3: Cut Foam to Size. ... Step 4: Glueing the Foam. ... Step 5: Use! or Wrap for a Lovely Gift :) ... 4 Comments.

How do you paint slate coasters?

Being a porous surface, to paint on to slate you do not need a primer as the paint will adhere to the surface easily. 3. You can base coat your slate if you wish. To create a matte finish similar to the natural slate, choose a beautiful shade of Chalky Finish paint.

What is the best product to seal slate?

Crommelin Slate Sealer is a clear, high gloss coating that seals and protects old and new slate surfaces while enhancing the stone's natural colour and beauty. Slate Sealer is highly durable and also suitable for use on other dense natural stones including granite, bluestone and marble.

What sealer do I use for slate?

We recommend a water-based sealer, which penetrates deep into the porous stone and, basically, disappears. More than one coat may be necessary to seal your slate tile properly. You can test this, when it's dry, by dropping a bit of water on the tile surface to see how well it beads up.

What can I do with slate?

Seven different uses for slate around the homeFlooring. ... Wall tiles. ... Worktops and countertops. ... Fire hearths. ... Planters. ... Homeware products. ... Tables and chairs.

Do slate coasters break easily?

Sandstone, slate, or ceramic: These natural materials are porous and will effectively absorb water, catching and trapping condensation. They come in a range of designs to elevate your home decor. That said, they are heavier and more likely to crack if they fall.

How do you cut slate for crafts?

To cut slate, you'll need to mark the slate so that you have a line to cut across. Then, you'll need to use a chisel and hammer, handheld slate cutters, or a power saw to cut it. If you use the correct tools and take your time, you can cut straight and precise lines with a little practice.

What kind of paint works on slate?

Exterior-grade, water-based latex paint that is made for masonry and stone materials is a durable choice for exterior slate. Oil-based paint has similar brittle and water-blocking qualities as oil-based primer, which makes it a less-durable choice for painting exterior slate.

What paint goes with slate?

As a neutral, slate plays wonderfully with almost every hue. For a modern palette, combine slate with neutrals like beige and sand, and add in a bright accent color like orange. To bring out any blue or purple undertones in a specific variation of slate, combine it with the same hue.

How do you put pictures on slate coasters?

0:593:24Adding Sublimation Images to the SubliSLATE Coaster from CondeYouTubeStart of suggested clipEnd of suggested clipSo our first step is going to be applying the Conde pro-spray to the image and what this is is aMoreSo our first step is going to be applying the Conde pro-spray to the image and what this is is a light adhesive. You're going to want to spray it over a trash can so it doesn't get on the carpet.

Does slate need to be sealed?

Like most other natural stones, slate tile flooring requires sealing to aid in water repellency and prevent staining and scratching, and sealer should be applied on a yearly basis. To see if your slate tile needs sealing, pour a bit of water on its surface.

How do you seal a homemade coaster?

You're going to want to coat the image and coaster with at least three coats of Mod Podge, allowing it to dry for 15 minutes (or until clear) between coats. Once the final coat has dried, spray all of the coasters with a clear acrylic gloss spray, which ensures that they're waterproof/drink proof.

Can you waterproof slate?

The best sealer to use for sealing a slate tile shower is a high quality water based impregnating sealer. Slate tiles are extremely porous and need to be sealed with a quality sealer that has a large solids content.

Does sealing slate make it slippery?

Topical Sealer may result in your slate floors becoming slippery when wet. To maintain the look and slip resistance of your slate and to prevent damaging moisture from being trapped within the stone, it is recommended to seal your surfaces with a high quality, invisible, fully breathable impregnating sealer.

What can you add to decoupage?

Decide what object you wish to decorate with decoupage. You can add pictures to almost anything: furniture, photo albums, shelving, frames, boxes, vases, mirrors, hardcover books, trays, suitcases, dishes, candles, cans, bottles, egg cartons, rocks, and much more.

What to use to spread decoupage?

Foam brush : Use this to spread the decoupage medium or glue onto the item you will decoupage. If you don't have a foam brush , you can use an ordinary paintbrush or even a cotton swab.

How to clean up glue?

Damp rag : Keep one nearby to wipe up excess glue and to help with other clean up. Make sure the rag is damp and not soaking wet when using it to remove excess decoupage medium from your glued papers. A damp rag also helps to keep your hands clean while working with glue.

What glue do you use for decoupage?

You should have at least one of those in your craft cupboard, but in a pinch, slightly diluted white glue will do.

How to decouple a picture?

To get started with decoupage, you cut out pictures and glue them onto an object. The next step is to cover the object and pictures with a few coats of glue or decoupage medium to protect it. You probably have everything you need to make your project lying around your home right now. Gather your supplies and start crafting .

How to decoupage pictures before glue?

Before you add glue, arrange the pictures onto the item you are decoupaging until you like the way they look. The pictures can be in any placement you like and can also overlap. Working in a small section at a time, remove the pictures and apply a generous layer of decoupage medium onto the item you are decoupaging.

What is decoupage in art?

Decoupage is a craft technique of affixing paper decorations to a hard surface with glue. By looking at a finished project, you would think this craft technique would be complicated, but it isn't. Decoupage started in France in the 17th century as the poor man's alternative to painted furniture. It is actually quite simple.

What surface can you use to make a decoupage?

Almost any surface can be used to create a decoupage project. Suitable surfaces include wood, papier mache, terra cotta, tin, cardboard and glass. Optional: basecoat your surface with acrylic paint. Pick your Mod Podge formula.

What is decoupage in art?

I use it as a noun with the Wikipedia definition: “is the art of decorating an object by gluing colored paper cutouts onto it in combination with special paint effects, gold leaf and so on.” Mod Podge is a glue that you can decoupage with!

How long does modge podge take to cure?

CURE TIME - Want to explain the difference for those who aren't aware, as most Mod Podge formulas dry within hours or overnight but are not fully cured for 3 - 4 weeks. Acrylic products typically dry right away, or within hours (or in humid environments maybe longer). You can touch them, hang them, but you shouldn't expose them yet to rough handling. Curing is when solvents in a product evaporate and a product reaches its maximum strength. Curing is a chemical process. Even craft paint goes through this process, as does wall paint, etc. You can hang a Mod Podge canvas once it's dried. Wear Mod Podge earrings. Fill a Mod Podged mason jar with candy and gift it. You shouldn't let people use a Mod Podge stepstool or table until it's cured. Or a Dishwasher Safe mug. This is because those particular items will get handled and "abused" more. So you want your acrylic medium (in this case, Mod Podge) to have time to reach its strongest state. Also an item is curing the entire 3 - 4 weeks. That means about 1.5 - 2 weeks in, it's at about 50% cured. But cure time depends on environment (where you live) and other factors. Use your best judgement on when you can use the Mod Podged item based on how the final product will be handled. If it's going to be beat up or washed, wait the four weeks."

How to apply modge podge to a project?

Add a protective coat of Mod Podge to the project using a sponge or flat brush. Allow to dry and then repeat. Let dry before using.

What type of glue is used for coloured paper cutouts?

This type of art uses layers of coloured paper cutouts from magazines or purpose-manufactured papers, that are glued onto various surfaces with Mod Podge, a specific decoupage glue.

How long does it take for modge podge to dry?

Smooth, Smooth, Smooth. Keep smoothing until all of the bubbles are removed. Then, AND THIS IS IMPORTANT, let the project dry for 15 – 20 minutes. Don't put a top coat on right away. Add a protective coat of Mod Podge to the project using a sponge or flat brush. Allow to dry and then repeat.

What paint should I use for decoupaging?

Many items need to be basecoated before decoupaging if your surface is unfinished. I recommend FolkArt, Apple Barrel, or Martha Stewart acrylic paints.

What Can You Decoupage Onto?

Personally, I like to work with wooden plaques when it comes to decoupaging. Wooden plaques come in all different sizes and can be purchased at most local craft stores, and they are not expensive. In addition, they make very attractive background canvases for working with decoupage and design transfers. In my opinion, the finished product is just as nice as if you were working on a much more expensive surface, such as slate. Michaels, A.C. Moore, and Jo-Ann's Fabrics & Crafts all carry wooden plaques. They are not expensive, and there is a weekly coupon available online.

What Supplies Do You Need for a Decoupage Project?

Something to decoupage onto, such as a wooden plaque. (Something made of rock, slate, glass, or even tin can work, too.)

How to use modge podge on plaque?

Drill to drill holes in your wooden plaque (this is very easy to do). Mod Podge (sealant) to use as glue for your designs, and then to seal your plaque with once designs are glued down. Paintbrushes to apply Mod Podge to the back of cutouts and also for sealing your plaque. You can use small brushes when you apply your designs to your plaque, ...

What do you need to transfer a design?

To transfer designs, you will need: a picture of something you want to transfer. transfer paper. a writing implement with a strong point (you can use a regular pen) something to transfer your picture onto such as a wooden plaque or frame, a rock, or a piece of slate.

Is slate paint more expensive than wood?

Slate is a bit more expensive to purchase than wood, and quite frankly, I think painting a wooden plaque with a slate-gray acrylic paint works just as nicely to this effect. Plus, it lowers the chance of it falling down and breaking in half like the one I made for my mom years ago.

Can you decoupage with napkins?

Napkins offer a wide variety of images that can be used for decoupage. Simply cut out the images, peel the layers of paper off of the back of the napkin, and glue to your project! Pinterest is also a great resource for finding images to decoupage with. The best resource for clip art, however, is Dover Publications.

How to seal a decoupaged surface?

Before you do so, gently buff the decoupaged surface with steel wool, then clean it with a damp cloth. Once it has dried, proceed to apply the sealer. If you want your design to look as if it were painted on, repeat the process of buffing, cleaning, and sealing as many times as needed to achieve the desired appearance.

How to decoupage furniture after it has dried?

Once it has dried, proceed to apply the sealer. If you want your design to look as if it were painted on, repeat the process of buffing, cleaning, and sealing as many times as needed to achieve the desired appearance. Almost any furniture or home accent can be updated through decoupage.

What is the first step in decoupage?

The first step of any decoupage project is to prepare the object you plan to transform. Repair any surface imperfections—whether scratches, gouges, or bona fide holes— and if applicable to the material with which you are working, sand the object to a smooth finish.

What is decoupage in art?

The fancy French word decoupage refers to the simple act of gluing paper or fabric cutouts onto an object. The results can be magical; once varnished, the glued-on design looks as if it were inlaid. For hundreds of years, people have been experimenting with decoupage, and in expert hands it’s truly an art form.

Step 2: Apply glue

Using a paint brush, apply a thin layer of decoupage over the entire surface. Stretch your material over the wet decoupage glue and, with the same brush, apply a second light coat of decoupage over the surface of the material to seal it.

Step 3: Make corners

For crisp edges, make a vertical cut in your fabric and overlap the fabric at the corners before sealing with decoupage.

Step 4: Trim

Cut off any excess material and seal the loose edges with a bit of decoupage.