To strain:
- Insert chain into chain jaws (remove twist).
- Clamp wires with the wire grips at both ends.
- Crank the handle to tension.
How do I choose a strainer post?
Strainer posts must be stayed for each fence line it is connected to, so that the fence does not pull the post over. Strainer assemblies can be wooden, steel or concrete. Wood – select timber, preferably local, that is durable in the ground. Treated timber is light and easy to cut to length and is resistant to rot and termites.
How do you use a mesh strainer?
The first strainer keeps the ice and other big stuff out, and the mesh catches the rest. Now, you’re also going to use the mesh strainer anytime you’re making a drink with egg whites in it. After shaking the cocktail, double-strain it into the serving glass, allowing the mesh to catch most of the egg whites.
Should you put the strainer in the sink or the pot?
What we should really be doing is taking the strainer, placing it directly into the pot and then pouring the water out into the sink. Less waste and less chance of burning ourselves! Do you know how many loose noodles I’ve lost to the cold, silver bottom of my sink? The answer is too many. Don’t miss our solutions to more pasta mistakes.
How do you use a pasta pot with strainers?
And that is where the actual purpose of the pasta pot with strainers comes into play. All you need to do is attach the insert on the top of the pot and hold it upside down on the sink. The insert will adequately contain all of the pasta inside while letting all the excess water drain out.
How do you install a strainer post?
2:133:45Steel Strainer Post Assembly: Installation Within 15 MinutesYouTubeStart of suggested clipEnd of suggested clipAnd then fill the hole back. In step3 place a tension cable over the strainer post lower it to theMoreAnd then fill the hole back. In step3 place a tension cable over the strainer post lower it to the ground and then walk the cable out there where the footplate will be located.
How long do you cut strainer posts?
The stay is of similar diameter to fence posts (100 to 125mm), its length is determined by the position on the strainer. As a rule, the stay should be 4 times longer than the distance from the ground to the position on the strainer where the stay joins it.
How long should a strainer post be?
What Length Should My Stay Be? The stay plays a critical part in the holding power of a fence strainer assembly. As a general rule of thumb, your stay should be at least 2½ times the height of your fence. So if your fence is 1.2m (48“) high, then your stay needs to be at least 3m (10') long.
What is strainer post in fence?
Strainer-post definition A sturdy post , situated at one end of a post and wire fence, that takes the major tension of the wires.
How deep should farm fence posts be buried?
The general rule of thumb when setting a post is that the depth of the post's hole needs to be one-third to one-half of the actual above-ground height of the post. So, a six-foot-high finished post ideally needs to be buried three feet into the ground.
How deep should stock fence posts be buried?
Erecting posts and stakes Straining posts are to be dug in to a depth of at least 90cm, properly rammed, firmed (using stones where necessary) and strutted in the line of the fence.
How far apart do you put fence posts for cattle?
Fence posts need to spaced 50-100 feet apart. Using the right energizer. They suggest 1 joule of output per mile of fence. Space your ground rounds far enough apart.
How far apart are woven wire fence posts?
The typical spacing of posts is between 8′ and 12′. The distance should be determined by the type of fence and the amount of support that the fence needs in order to stay taught.
How far apart do you put fence post?
Most fence posts can be spaced 8 to 12 feet apart. While this is a general criteria, it doesn't cover all scenarios. For instance, high tensile fence can have larger spacing, requiring line posts every 15 to 20 feet for field fence styles, and as much as 20-30 feet for high tensile barbed and smooth wire.
What are straining posts?
Strainer posts are larger posts for use at the ends or corners of netting or line wire runs. These larger posts enable the netting to be strained up (pulled tight). Each strainer is usually braced with smaller diameter peeled posts.
How do you tie a wire to a strainer post?
0:463:05Tying Off Wire to a Strainer Post! (Termination Knot) #EP3 - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo if you trap that with your thumb. And then just push that loop up and through. And then pullMoreSo if you trap that with your thumb. And then just push that loop up and through. And then pull against itself so when you pull back and get a nice tight loop.
How do you strain a fence?
0:325:50Fencing Knots 3 The Strainer or speed Knot - YouTubeYouTubeStart of suggested clipEnd of suggested clipAt this end of the strainers. The next thing that I'm going to do is I'm going to get the other endMoreAt this end of the strainers. The next thing that I'm going to do is I'm going to get the other end of my strainers. And I'm going to put the chain on them. And put the chain into one of these claws.
What is a good distance between fence posts?
around 8 feetTypical spacing is right around 8 feet between each post however different circumstances may call for different measurements and it is not uncommon to have spacing between posts reach up to 10 feet. Once you have a rough idea of your post layout start by digging your first hole.
How do you stay in a strainer post NZ?
1:094:01Strainrite | How to install a blocked strainer for electric fence Part 2YouTubeStart of suggested clipEnd of suggested clipAnd without moving it just set your foot on it and Mark it out for the corner of the state cornerMoreAnd without moving it just set your foot on it and Mark it out for the corner of the state corner cut through the ground easily. Down about 50 passed it gene. And once you got up mark.
How do you brace steel posts for concreting?
1:493:33How to set steel posts in concrete. part 1 in brisbane - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe now have brackets which I've made little pieces of timber with a bolt on either side. And we areMoreWe now have brackets which I've made little pieces of timber with a bolt on either side. And we are this is how we fit the steel. Either the concrete.
How do you tie a wire to a strainer post?
0:463:05Tying Off Wire to a Strainer Post! (Termination Knot) #EP3 - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo if you trap that with your thumb. And then just push that loop up and through. And then pullMoreSo if you trap that with your thumb. And then just push that loop up and through. And then pull against itself so when you pull back and get a nice tight loop.
What Is The Best Way To Install A Strainer Post?
Driving a post in is the superior way. It causes the least disturbance to the soil (which has the job of supporting the post and thus the entire fenceline).
Why Do Strainer Posts Move?
Think of a see-saw, what happens when one kid is heavier than the other? The lighter kid goes straight to the top.
How Important Is The Diameter Of The Post?
It isn‘t (within reason). We recommend 80NB (89mm O.D) or 100NB (114mm O.D) strainer posts. A commonly held belief is that the greater the diameter of the post, the greater hold it will have in the ground. This isn‘t accurate.
Why Use A Diagonal Steel Stay Assembly?
Because they‘re the easiest, quickest and one of the strongest assemblies you can install. They‘re also fully adjustable, meaning you can’t get it wrong.
Why does my fence post pull out?
If a post pulls out, it is most likely due to; the post not being set deep enough or the stay not being long enough.
Can you backfill a hole with a timber strainer?
Digging a hole, dropping a large diameter timber strainer into it and then backfilling it, is a lot of work for no real gain. The same goes for setting steel posts in concrete.
Can you make a cheesy entree ahead of time?
This cheesy entree is a make-ahead dream. Just assemble it ahead of time and put it in the oven when company arrives. I round out the meal with a tossed salad and warm bread. —Karen Jagger, Columbia City, Indiana
Can you put a strainer in the sink?
In her video, Johanna explains that everything we’ve known about using strainers is a lie. We’re not actually meant to put the strainer in the kitchen sink before pouring. What we should really be doing is taking the strainer, placing it directly into the pot and then pouring the water out into the sink.
How to get strainer lid off?
Hold the lid, place your forefinger and middle finger on top of it (the strainer lid will come off if you don't).
What to look for when buying a strainer?
When buying a strainer, the things you should look out for in the strainer are performance, durability, ease of cleaning, and appearance.
What is a cocktail strainer?
A cocktail strainer is a bar accessory used to strain ice and chunky ingredients from the mixed drink poured into the glass.
Why do bartenders strain martinis?
Again, we strain cocktails to pour out old ice to pour the drink over fresh ice. Another reason why bartenders strain martinis and similar cocktails is to extract chunky ingredients like a piece of fruit.
How to shake a cocktail with a forefinger?
Have a firm grip on your mixing tin with your forefinger and middle finger, place on the strainer lid to secure it. Place your cocktail shaker on the serving tin while shaking slightly to let the ice move around the drink.
What is a julep strainer?
When drinking the drink from the bottle, the strainer is kept in place by the long handle. It is more stable and easier to clean than others, despite working a little slower. A Julep is a decent option if you're a novice because its design allows for more flexibility when keeping it over the bottle and moving the drink over.
How many strainers are there in the spirit world?
There are three types of strainers found in the spirit world, each with its purpose.
What is a strainer in a fence?
Strainer assemblies also known as “end assemblies” are the most important part of the fence as they take the tension of the wire and eliminate any fence movement. Strainers are required at the end of each fence line, gateways, corners and changes in fence direction,at the crest or hills and bottom of gullies. Strainer assemblies may also need to be included at intervals in long fences over flat ground. Strainer posts must be stayed for each fence line it is connected to, so that the fence does not pull the post over.
What is a line post?
Line posts are set at regular intervals between strainer assemblies and are used to guide the line of wires and to provide additional support. Like the strainer assemblies, line posts can also be wooden, steel or concrete. The type of line post selected will depend on what you are trying to fence in and what life span you require from the fence. Different materials can be used in combination if suitable.
How to determine number of posts needed for a fence?
The number of posts required is determined by the fence length (distance between strain assemblies) divided by the interval between line posts. Post intervals will be dependent on livestock type and stock pressure. A suspension fence can be used as an alternative to using close interval posts and is best suited to flat country. This is where the line posts are set further apart and droppers are used in between line posts to maintain fence integrity and help spread stock pressure from a single wire, to all wires in the fence, reducing the risk of overloading and subsequent wire breakage Droppers are made from wood, steel, fibreglass or plastic.
How to make a fence straight?
To ensure the fence is a straight as possible it is recommended a sight wire be strained close to the ground between the end assemblies. Using this sight wire as a guide lay line post at predetermined intervals along the fence line. Wooden or concrete posts will need holes to be dug or a mechanical driver can be used. Steel Y shaped posts can be driven direct into the ground using a post driver.
What is the Purpose of a Pasta Pot with Strainer?
As we have mentioned above, preparing pasta can be a tedious process. First, you need to boil the shells for a while.
What to do after putting pasta in a pot?
After putting the pasta inside the pot, the next step would be to fill it with water. Some of the pots will have the water label marked inside the pot.
Can you put uncooked pasta in a pot?
First and foremost, you need to put the uncooked pasta inside the pot. Here, you need to consider the overall capacity of the pot .
Do you need to attach a strainer insert?
Now that the past is cooked properly, you need to attach the strainer insert. However, some of the units might require you to attach the insert on step number one.
What size strainer is best for double straining?
RSVP 3-Inch Stainless Steel Conical Strainer ($8) – This is a really basic mesh strainer, and it’s exactly what you need. The relatively large, 3-inch size and conical shape make it perfect for double-straining cocktails.
How to use a julep strainer?
To use a julep strainer, all you have to do is pop it into your mixing glass at an angle, hold it in place with your index finger, and pour the drink into its serving glass. Cocktail Kingdom Premium Julep Strainer ($11) – As usual, Cocktail Kingdom’s offerings are the industry standard.
How to strain ice from a cocktail?
Finally, you’re also going to want a mesh strainer, sometimes called a tea strainer. This one uses a really fine metal mesh to strain out any persistent little bits of pulp or shards of ice that have resulted from vigorously shaking the cocktail. To do that, you have to use a technique called double-straining, which is exactly what it sounds like: you hold the mesh strainer over the serving glass with one hand and strain the drink into it (out of the shaker, using a Hawthorne strainer) with the other. The first strainer keeps the ice and other big stuff out, and the mesh catches the rest.
What are the different types of strainers for cocktails?
Cocktails strainers are generally broken up into three categories: Hawthorne strainers, julep strainers, and mesh strainers. The easiest way to think about it is that there are three different types of things you’re going to want to strain out of your drink, depending on what you made and how you made it.
What is a vintage julep strainer?
Vintage Julep Strainer ($12) – This vintage julep strainer takes on a classic scalloped seashell design, so you can feel like a real genteel southerner from yesteryear. It also features an indent in the handle, which will help keep it in place as you’re straining your drink.
What are the different styles of cocktail strainers?
The three styles of cocktail strainer, from left to right: julep, Hawthorne, and mesh.
Can you use a julep strainer on a cocktail glass?
Anyway, nowadays it’s used to strain stirred cocktails out of your mixing glass. Because stirred cocktails typically don’t have anything other than spirits and other alcoholic ingredients (nothing too pulpy and substantial, anyway), it’s not necessary to have an adjustable opening like on a Hawthorne strainer. You’re simply separating the booze from the ice. To use a julep strainer, all you have to do is pop it into your mixing glass at an angle, hold it in place with your index finger, and pour the drink into its serving glass.
