Plug in the pump, connect its drainage hose, and run this to the drain. Place the pump in the deepest part of the hot tub and switch it on. Allow to drain, but pay attention to the water level so you can switch off the pump when the water has been removed (unless it is a design that will do so automatically).
How do I drain my hot tub?
HOW TO DRAIN YOUR HOT TUB. Turn the power to the spa off at the circuit breaker. Place the pump inside the spa. If your pump’s outflow hose isn’t long enough to reach a drain, connect it to a garden hose. Turn the pump on and let the spa drain. When the hot tub is empty, turn off the pump, remove it from the spa, detach the hose,...
What do you do when your hot tub is empty?
When the hot tub is empty, turn off the pump, remove it from the spa, detach the hose, and return it to storage. Clean your empty spa. Once the water is drained, you can easily inspect and wash the shell’s interior, and remove and clean your spa filters before refilling it.
How often should I drain my spa or hot tub?
Draining, or emptying your spa or hot tub, is necessary every 2-4 months, to reduce the amount of dissolved solids in the spa, and any germs or "baddies" that may have built up some resistance to the spa chemicals. Draining is also sometimes preferable to intensive shock treatment, which can be harmful over time to spa seals and finishes.
How do you winterize a hot tub?
A small air compressor can also be used, (with low pressure), connected into the pump drain plug. This is important, to prevent standing water from developing into a bacterial mess, inside of the hoses or equipments. The same process is used to winterize a spa or hot tub.
How do I drain my infinity spa?
0:161:54How to Drain Your Hot Tub - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll you unscrew the cap then Cece photos your hose on the. End. And once it's on there you're goingMoreAll you unscrew the cap then Cece photos your hose on the. End. And once it's on there you're going to take the vase.
How do I drain the water in my hot tub?
Turn the power to the spa off at the circuit breaker. Place the pump inside the spa. If your pump's outflow hose isn't long enough to reach a drain, connect it to a garden hose. Turn the pump on and let the spa drain.
Where is the drain plug on my hot tub?
Your hot tub comes equipped with a drain spigot, which is located on the outside of the tub, near the bottom rim. (Some models have two spigots, a primary and an auxiliary. The primary spigot is the one you'll use to drain the hot tub; the auxiliary one is for bleeding the internal lines.)
How do you manually drain a hot tub?
1:472:46How to drain (empty) a spa by gravity if you do not have a submersible ...YouTubeStart of suggested clipEnd of suggested clipJust insert the screwdriver. Behind the rubber gasket. And help push it kind of in a twisting motionMoreJust insert the screwdriver. Behind the rubber gasket. And help push it kind of in a twisting motion. So that opens up and now the water straining out and how long does it take to empty out your spa.
How do you drain a hot tub fast?
Drop one end of a long vacuum hose into the spa, and connect the other end to the wet/dry vacuum. Turn it on for a few seconds - just long enough to let the hose prime and get the flow moving. Turn off the vacuum, and quickly disconnect the hose so the water can flow out onto the ground.
How do you open a hot tub drain valve?
0:263:08How To Operate Hot Tub Drain Valves | Master Spa Parts - YouTubeYouTubeStart of suggested clipEnd of suggested clipBasically you have your cap on you're gonna take the cap off connect to your hose. This end hereMoreBasically you have your cap on you're gonna take the cap off connect to your hose. This end here spins and then you're gonna pull it out. Once it's pulled out.
How do you drain a hot tub with a hose?
0:008:42How to Drain a Hot Tub - Garden Hose or Submersible PumpYouTubeStart of suggested clipEnd of suggested clipIn this thing is a float that tells it automatically. Whether or not it's in the water. And onceMoreIn this thing is a float that tells it automatically. Whether or not it's in the water. And once it's in the water the hose starts to fill up with water automatically.
Can I drain my hot tub on my lawn?
You shouldn't drain your hot tub on your lawn. Spa water contains harmful chemicals like chlorine or bromine that will kill your grass and discolor your well-kept lawn. Instead, run your hose or drain well away from grass or vegetation and also away from the foundation supporting the hot tub.
How often should you drain a hot tub?
With average use, your hot tub should be drained and refilled about once every three or four months. But since everyone uses their hot tub differently, the answer can vary based on how many people use it and how often. Hot tub manufacturers like Jacuzzi offer some handy tips for figuring out when to drain and refill.
How long does it take to drain a hot tub with a garden hose?
This will usually take around 30 minutes to completely empty your hot tub. Locate the drainage valve of the hot tub. Connect the garden hose and run this to a drain. Open the valve to allow the water to drain out.
How do you balance a hot tub after filling?
3:375:01Chemicals for Hot Tub Start Up - Step-by-Step Instructions - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhich is a recommended range by the way. One last test and that's it once enough time is passed toMoreWhich is a recommended range by the way. One last test and that's it once enough time is passed to allow the chlorine to fall to the recommended levels then your water is balanced. And ready to enjoy.
How long can a hot tub stay empty?
Usually, 10 to 14 days. It will not freeze overnight. Leave the cover securely fastened in the event of a power outage and keep the cabinet door shut. Additionally, you could put a light bulb or space heater in the cabinet around the mechanicals to buy a few more days.
How do I drain my hot tub with a hose?
5:208:42How to Drain a Hot Tub - Garden Hose or Submersible PumpYouTubeStart of suggested clipEnd of suggested clipThough you simply plug it in and then drop it in. And make sure you have enough slack on the hose iMoreThough you simply plug it in and then drop it in. And make sure you have enough slack on the hose i like to place it in the absolute lowest part of the hot tub.
How do you drain and fill a hot tub in the winter?
If you need to change the water, do so in small batches. Remove 6″-12″ of water at a time; refilling – and reheating – the water in between these partial drains. While this won't get you the same results as completely draining and refilling the hot tub, it will get you by until the weather warms up.
How often do you need to drain a hot tub?
With average use, your hot tub should be drained and refilled about once every three or four months. But since everyone uses their hot tub differently, the answer can vary based on how many people use it and how often. Hot tub manufacturers like Jacuzzi offer some handy tips for figuring out when to drain and refill.
Can I drain hot tub water on my lawn?
You shouldn't drain your hot tub on your lawn. Spa water contains harmful chemicals like chlorine or bromine that will kill your grass and discolor your well-kept lawn. Instead, run your hose or drain well away from grass or vegetation and also away from the foundation supporting the hot tub.
Draining Using the Spigot
Knowing how to clean your hot tub is something you should look into before you make the purchase. Here’s a guide on how to drain your hot tub using the spigot.
Draining Using an Internal Pump
Many hot tub owners also invest in a submersible pump, one that can quickly pump out the water in the spa and save a lot of time! In fact, for your average hot tub, this method will take no more than 15 minutes to clear the water.
How long does it take to drain a hot tub?
Drain your hot tub. Depending on the size of your spa, it should take around an hour to drain using the hot tub’s drainage spigot, or ten minutes to drain with a submersible pump. To drain using the spigot: Turn the power to the spa off at the circuit breaker.
What to do when a hot tub is empty?
When the hot tub is empty, turn off the pump, remove it from the spa, detach the hose, and return it to storage.
How many spigots does a spa have?
Your spa model may have two spigots, a primary and auxiliary spigot. Use the primary spigot to drain most of the water, and then open the secondary spigot to drain the internal bleedlines. Attach the garden hose to the spigot, being careful not to cross-thread.
What is an airlock in a hot tub?
An airlock is an air bubble that gets trapped inside your hot tub’s plumbing as it’s being filled with water . One or more air bubbles can cause the spa to work improperly and could damage jet and circulation pumps if you run them with air inside.
How to clean a spa filter?
Cleaning your spa’s filters is even easier than cleaning the shell and should be done monthly. Remove the cover to the filter compartment. Remove any floating items from the compartment. Turn the filter retainer handle to unlock the filter and retainer. Remove the filter cartridge and retainer.
What is a hot tub?
A hot tub offers a soothing, relaxing experience each time you use it. It provides daily enjoyment, relief, and comfort, and can improve your quality of life. Because your spa takes care of you, it’s only fair that you give it a little TLC in return. It doesn’t take much to maintain your spa on a regular basis —just keep the water clean, ...
Do you need to change the water in a hot tub?
Whether you use a chlorine, bromine, ozone, or salt water system to purify your spa, you enjoy pristine water, free of contamination, for months on end. With every system, you'll need to change the spa water now and then.
How long does it take for a spa to drain?
Gravity Draining with a hose takes some time, my spa takes about 3 hours to drain. I come out every hour and move the hose to a new location in my backyard. You can also use a small submersible pump, like a pool cover pump, to drain the spa in 15-30 minutes. When it's about halfway down, I spray down the exposed walls with my garden hose, and again when empty.
How long can you leave a hot tub dry?
Wooden hot tubs will dry out without water in them, so it is not recommended to leave them dry for longer than a few days, just long enough for repairs or relocation.
How to clear out a spa line?
As the spa is nearly drained, turn on the blower, to clear out the lines (you may want to put the spa cover on first!). Use a powerful wet/dry vac to blow air through the pipes - from the skimmer and spa jets. A small air compressor can also be used, (with low pressure), connected into the pump drain plug. This is important, to prevent standing water from developing into a bacterial mess, inside of the hoses or equipments. The same process is used to winterize a spa or hot tub.
Why does my spa drain?
Some spa owners will drain for persistent cloudy water, or after a heavy use weekend by many people, or if they've managed to let the spa "go" - for some time without sanitation or filtration. I've drained my spa for all of these reasons at one time or another - otherwise, it's every 3 or 4 months.
Is it better to drain or shock spa?
Draining is also sometimes preferable to intensive shock treatment, which can be harmful over time to spa seals and finishes. I prefer to drain more often, and use fewer harsh chemicals, when possible.
Can you drain a hot tub?
There are some considerations for draining a hot tub, including: local water restrictions, spa water chemistry and in some areas - water discharge regulations. If you plan to leave the spa drained for an extended period of time, I have some tips below for that too.
Is spa purge a biofilm remover?
If you've never use one of these spa pipe cleaners, you'll be amazed at the amount of gross, brown bio-gunk that it foams to the surface. Spa Purge is a name of one spa biofilm remover, I get great results using Jet Clean, which is a lot cheaper.
What is MAAX technology?
MAAX uses durable, high quality materials and innovative technology in the manufacturing and design of its product to minimize the time you need to spend cleaning and caring for them. However, proper and regular maintenance is still vital.
What is MAAX Lumashine?
Help prevent dust build-up on acrylic tub and shower surfaces with MAAX Lumashine, a special acrylic surface cleaner that creates an anti-static, dust-repellent surface as it cleans. Lumashine is available from MAAX dealers.
How to clean acrylic paint?
Clean regularly with a non-abrasive cleaning spray, cream-based cleansing agent or dishwashing soap. Any cleaning product with the inscription "safe for acrylic" may be used. Pure vinegar is useful to remove stubborn stains, but if the stain persists, use 99% alcohol. Never use abrasive cleansers, scrapers, metal brushes, or anything that could scratch or dull the surface.
How to remove plaster residue from a wall?
Remove plaster residue with a plastic or wooden spatula wrapped in a moist cloth.
What is the best way to clean acrylic?
Any cleaning product with the inscription "safe for acrylic" may be used. Pure vinegar is useful to remove stubborn stains, but if the stain persists, use 99% alcohol. Never use abrasive cleansers, scrapers, metal brushes, or anything that could scratch or dull the surface.
Can you replace shower door gaskets?
Replace shower door gaskets (horizontal and vertical) if there is any tear or if they become discolored. Gaskets are easy to purchase and change, however, specific showers require specific models. Check your purchase invoice for details.
Can you use bubble baths on a tub?
Use therapeutic products, such as bath oils, salts and bubble baths with caution, as they may damage your tub's finish. Read the directions for such products closely and, if needed, test on a small surface prior to use.
What is F2 drain?
F2 Drain - An innovative solution for freestanding bathtubs
How much space is needed for a P trap?
The minimum space required for the assembly of the F2 Drain and the P-Trap is 10 3/8 inches between the bathroom rough floor and the ceiling below. You need to confirm this measurement to ensure you that your floor beams provide the required clearance space.
Can you access plumbing without demolishing the floor?
Access plumbing easily, without having to demo lish the flooring or ceiling.
How to power a spa?
• Allow anyone to stand on the spa cover. It is not designed to support weight. • Power the spa unless it is filled with water 5-6 inches below top of spa lip . • Operate the pump on high speed for ex- tended periods of time with the cover in place. Extended operation can cause heat build-up and interfere with spa operation.
What voltage should a hot tub be supplied with?
Parts containing live voltage, except parts supplied with safety extra-low voltage not exceeding 12V, must be inaccessible to a person in the hot tub. Earthed appliances must be permanently connected to fixed wiring.
How does SWM work in spas?
Smart Winter Mode -The Smart Winter Mode is used to prevent water from freezing in the plumbing. When SWM is enabled, the system periodically starts a purge of all pumps to ensure there is always warm water in the plumbing. This function is achieved by measuring the temperature of an on-board sensor to estimate the temperature in the equipment area. This protection starts as soon as there is a risk of freezing. The SWM protection will turn back off only after 24 hours without a risk of freezing. The delay between each SWM purge cycle depends on the pumps’ idle time (see table below).
Where to put warning signs at a spa?
Each spa has been provided with a warning sign that outlines safety precautions. This sign should be permanently placed in a location that is visible to all spa users. This sign has been mounted permanently to the front of the spa. Replacement signs can be obtained from: MAAX Spas 25605 S. Arizona Ave. Chandler, AZ 85248
How to register a Laspas spa?
SAVE THIS INFORMATION FOR FUTURE REFERENCE TO OFFICIALLY ACTIVATE YOUR WARRANTY YOU MUST GO TO www.laspas.com AND REGISTER YOUR SPA BY CLICKING ON THE REGISTER YOUR SPA LINK UNDER THE CUSTOMER CARE TAB AND FILL OUT ALL THE INFORMATION
What do you measure before entering a spa?
Before entering the spa or hot tub, measure the water temperature with an accurate thermometer.
How far away from a spa can you put a radio?
Do not permit electric appliances (such as a light, telephone, radio or television) within 5 feet (1.5m) of the spa or hot tub.
