How do you extinguish a firelog?
There's nothing special or difficult to do when you need to extinguish your firelogs whether they're for indoor or outdoor use. As you would with any fire, simply douse them carefully with water. Another option is to use sand, making sure the flames are completely covered.
How do you seal wood logs for outdoor use?
Apply a penetrating oil-based sealer to the logs. The sealer can be hand brushed on for heavier coverage, or two coats with an airless sprayer will provide adequate coverage. Exterior log walls that have full sun exposure require an extra coat of sealer. A colored stain can be added to the sealer to intensify or change the color of the logs.
How do you extinguish a Duraflame log?
If you need to extinguish a burning log, do so thoroughly, to avert the possibility that it may reignite. Pour water over the Duraflame log in a slow, controlled manner using a metal container. This helps reduce the risk of splashing ash or scattering sparks or burning material.
How do you take care of a pine log home?
Because pine is a natural material, the wood requires preservation and regular maintenance to retain its natural beauty. Inspect your log home annually for any signs of insect infestation, fungi, mold or mildew. Once a year (fall is a good time) use a stiff broom to remove all surface debris, pollen and dust.
How do you extinguish a burning log?
Always ensure your chimney damper is fully open before you open the stove door to prevent smoke from billowing out. Lightly spray water or baking soda over the top of the embers to help put the fire out completely. Close the stove door. Sweep out remaining ashes once the stove has cooled down enough.
Can you put out a firelog with water?
Putting Out Duraflame Logs There's nothing special or difficult to do when you need to extinguish your firelogs whether they're for indoor or outdoor use. As you would with any fire, simply douse them carefully with water. Another option is to use sand, making sure the flames are completely covered.
How long does it take for a fire log to burn out?
two to three hoursThe main attraction of firelogs is that they're easy. They light without fuss, burn steadily for two to three hours, and when they're done you have only a small pile of ash to sweep up. Wood fires need constant attention, and even when the flame is out, hot coals may smolder for hours.
Can you use Pine Mountain Logs in fire pit?
Can I burn Pine Mountain Firelogs in my outdoor backyard fire pit or chiminea? Yes, all Pine Mountain Firelogs are appropriate for outdoor use, including fire pits, camping, and chimineas as long as they are not burning in an airtight container.
How do I extinguish a Duraflame log?
In an emergency, how can I extinguish the logs? Carefully douse fire with water or sand or use a dry chemical fire extinguisher.
How do you put out a fire in a fireplace before bed?
Baking soda contains sodium bicarbonate, which is an ingredient in many class C fire extinguishers that will completely extinguish any stray embers. Additionally, once you've waited at least a few hours but preferably overnight, scoop up all the ashes and place them in a metal ash container.
Which wood should you not burn?
Pine, fir, and spruce: cone-bearing trees make for a beautiful sight in the forest, but their wood shouldn't make up the bulk of your firewood pile, especially for indoor fires. Beneath their bark, conifers have a sticky, protective substance called pitch or resin that you won't find in trees like oak or maple.
How do you hollow out a log with fire?
0:2510:53Hollow Log Fire. - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you set a as large as you can find or as large as your camp needs a section of a hollow log. OnMoreAnd you set a as large as you can find or as large as your camp needs a section of a hollow log. On top of those coals. And that'll catch the inside of that log on fire and it will kind of burn.
Are fire logs better than wood?
Firelogs burn much cleaner than real firewood. They typically produce 70 percent less particulate matter, 85 percent less carbon monoxide and 50 percent less smoke.
How do you use Pine Mountain Firelogs?
0:000:27How to use and light a Pine Mountain firelog - YouTubeYouTubeStart of suggested clipEnd of suggested clipLight the wrapper at the arrows on top of the fire log. Close your fireplace screen and enjoy yourMoreLight the wrapper at the arrows on top of the fire log. Close your fireplace screen and enjoy your fire pine mountain more warmth more time more life.
Are Pine Mountain Firelogs safe?
The raw materials used to manufacture Pine Mountain firelogs and firestarters are non-toxic.
How do you use Pine Mountain roasting Logs?
LIGHTS FAST AND EASY: Stack 3 roasting logs for each occasion. Light the wrappers and withing 5 minutes your cooking fire is ready. 3 roasting logs will burn for up to 1 hour. Each carton contains enough Roasting Logs for 2 uses.
How do you dispose of Duraflame ashes?
If you don't have a garden or lawn, be sure to safely dispose of your ashes by placing them in a covered metal container away from the house and never place the metal container on a wood deck or patio while the ashes are still warm. So in the future, put those ashes to good use!
How do you put out a log fire at home?
0:031:13How to Put Out a Fire in a Fireplace - YouTubeYouTubeStart of suggested clipEnd of suggested clipLike a blanket a towel or anything like that flowers are readily available material in most homes.MoreLike a blanket a towel or anything like that flowers are readily available material in most homes. Just take the container. And dump it onto the fire and it'll smother the fire.
Can Duraflame logs be used outside?
DURAFLAME® OUTDOOR FIRELOGS The perfect firelogs for the great outdoors, and specially designed and tested for roasting campfire foods.
Can I roast marshmallows over Duraflame?
Roast your marshmallows over the fire, get them as burnt or as gooey and barely done as you wish, and then slam those babies between two grahams. Use duraflame OUTDOOR firelogs, tested for roasting campfire foods.
Step 1
Inspect your log home annually for any signs of insect infestation, fungi, mold or mildew. Once a year (fall is a good time) use a stiff broom to remove all surface debris, pollen and dust. Rinse the logs down, starting at the eaves and working down to the foundation.
Step 2
Chink and caulk the logs as required. Chinking is available from log contractors and can be applied with a caulking gun or putty knife. Read and carefully follow the manufacturer's product guide and application instructions.
Step 3
Apply a penetrating oil-based sealer to the logs. The sealer can be hand brushed on for heavier coverage, or two coats with an airless sprayer will provide adequate coverage. Exterior log walls that have full sun exposure require an extra coat of sealer. A colored stain can be added to the sealer to intensify or change the color of the logs.
Step 1
Vacuum or dust interior logs on a regular basis. Wood smoke, cooking greases and film produced by gas heat builds up on the logs over time, creating a dulling film.
Step 2
Examine interior logs. Are they sealed with a penetrating oil sealer or stain? Have they been varnished or coated with Polyurethane? If oil has been used on the logs, wipe them down with a soft cloth and a commercial cleaner/polish such as "Liquid Gold". This will cut the oily residue and restore the logs to their original beauty.
Step 3
Interior logs that have been varnished or coated with a top film sealer, need only to be wiped down with a bio-degradable mild de-greaser soap and water solution.
Step 4
Inspect exterior logs annually. Look for water damage, fungi, mold or insect infestation. Repair and treat as required. Repair and replace chinking as required. Chinking can be applied with a caulking gun or putty knife. Follow manufacturer's instructions on packaging label.
Step 5
Seal logs with an application of oil-based penetrating sealer. Stain may be added to the sealer to intensify or change the color of the logs. Sealer can be applied with a wide, soft paint brush or airless sprayer.
