You have two options when fastening AZEK trim: screws or nails. I like using the Cortex Screws because they countersink perfectly and then are plugged without glue. This option will provide you a nice, finished look. If you choose to use nails, you will have to use a full round head, smooth nail with a shank size that you can’t bend in your hand.
What fasteners should I use with Azek trim and moulding products?
• To take advantage of the performance of AZEK Trim and Moulding products, use a highly durable fastener such as stainless steel or hot dipped galvanized. • Staples, small brads, and wire nails must not be used. • The fasteners should be long enough to penetrate the solid wood substrate a minimum of 1 1/2".
How do you fasten Azek trimboard?
Fasten using nail (minimum 1 1/2” long with minimum of 5/16” head) in every other hole Fasten trimboard according to standard AZEK Trim guidelines. Keep pieces together while measuring and cutting for a more accurate fit
What kind of nails do you use for Azek trim?
They should be stainless steel or hot dipped galvanized and long enough to penetrate the substrate a minimum of 1-1/2”. For best results, use fasteners designed for wood trim and wood siding. These fasteners have a thinner shank, blunt point, and full round head. Standard nail guns work well with AZEK Trim.
How do I minimize expansion and contraction of Azek trim and moulding?
• Properly fastening AZEK Trim and Moulding material along it’s entire length will minimize expansion and contraction. • When properly fastened, allow 1/8” per 18 feet of AZEK Trim and Moulding products for expansion and contraction. Joints between pieces of AZEK Trim and Moulding material should be glued to eliminate joint separation.
What is the best way to fasten AZEK Trim?
0:040:53How to Fasten PVC Mould and Trim - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe proper fasteners for Azek trim should be long enough to penetrate the solid wood substrate aMoreThe proper fasteners for Azek trim should be long enough to penetrate the solid wood substrate a minimum of one and a quarter inches. Standard nail guns do work well with a sec trim.
What fasteners to use with AZEK trim?
To take advantage of the performance of AZEK Trim and Moulding products, use a highly durable fastener such as stainless steel or hot dipped galvanized. Staples, small brads, and wire nails must not be used. The fasteners should be long enough to penetrate the solid wood substrate a minimum of 1 ½”.
Should I nail or glue PVC trim?
To fasten the trim to the wall, I use 2 1/4-inch-long 15-gauge nails. On the interior of a home, nail holes in PVC can be filled with almost anything used with wood; Bond-and-Fill is a safe choice. To glue joints together, use PVC cement, since wood glues like Titebond II don't work all that well with PVC.
What fasteners to use with PVC trim boards?
Fastening your PVC Trim Boards We recommend using 8d nails, which are usually used for wooden trim with a minimum strength of 12 gauge.
What do you fill azek nail holes with?
0:381:53Filling Nail Holes in VERSATEX PVC Trimboard - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can use a two-part methyl methacrylate like bond and fill or trim welder by extreme adhesives.MoreYou can use a two-part methyl methacrylate like bond and fill or trim welder by extreme adhesives. These products must be mixed properly.
How do you fasten PVC trim?
2:555:20How to Install PVC Trim & Mouldings - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you take a little rubber hammer. And hit that off so it works very very good i want to show youMoreSo you take a little rubber hammer. And hit that off so it works very very good i want to show you another option of how you can put a window trim around and that in this very unique supply gem pvc.
What is the best adhesive for PVC trim?
Titebond Ultimate PVC Trim Adhesive and Sealant is a one-component, advanced polymer adhesive sealant designed for a variety of PVC trim, moulding, deck railing and beadboard installations. It adheres and seals PVC trim to virtually any material including wood, metal, masonry, other PVC trim and more.
What nails do you use for PVC trim boards?
Cellular PVC manufactureres recommend high-quality fasteners such as stainless steel or hot-dip galvanized. In sea-coastal areas, TYPE 316 stainless steel nails are recommended.
Can azek be glued?
0:040:38How to Use AZEK PVC Adhesive - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhen properly applying a second he Civ the glued Azek joints will not separate Azek adhesive has aMoreWhen properly applying a second he Civ the glued Azek joints will not separate Azek adhesive has a six to ten minute working time depending on heat and humidity.
Will PVC trim hold a screw?
Fasten PVC trim with stainless steel screws or hot-dipped siding nails. When it comes to choosing your fasteners, don't scrimp by using fasteners that won't last as long as the vinyl trim. Stainless steel screws with small finish heads are the best choice because they'll never corrode.
Can I use a nail gun on PVC trim?
Can You Use a Nail Gun on PVC Trim? The answer is yes, you can use nails to fasten PVC trim. Use a coil nailer and stainless 8d nails with full round head for PVC trim installation. For indoor trims, the 15-gauge finish nailer works well.
Does Liquid Nails work on PVC trim?
Liquid nails does have a few products that will work when bonding PVC and wood and the three that the company recommends are: Liquid Nails Siding & Trim. Fuze It. Liquid Nails Polyurethane.
How do you hide screws in azek?
0:181:23Cortex® Hidden Fastener System for TimberTech® AZEK® DeckingYouTubeStart of suggested clipEnd of suggested clipDrive into the board until the setting tool releases the screw holding. The collated plugsMoreDrive into the board until the setting tool releases the screw holding. The collated plugs perpendicular to the board. Set the plug in the hole.
How do you hide screws in PVC trim?
0:272:03FastenMaster Cortex Hidden Fastening System for PVC TrimYouTubeStart of suggested clipEnd of suggested clipIn addition by removing the felt washer on the setting tool the screw can easily be backed out orMoreIn addition by removing the felt washer on the setting tool the screw can easily be backed out or used to adjust the trim height.
How do you attach azek fascia?
0:121:19How to Install PVC Rim Joist Covers - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe top and bottom screws should be positioned no more than a half inch from the edge of the rimMoreThe top and bottom screws should be positioned no more than a half inch from the edge of the rim joist cover. The third screw should be approximately centered in the board. Repeat. This configuration.
Can I use a nail gun on PVC molding?
Can You Use a Nail Gun on PVC Trim? The answer is yes, you can use nails to fasten PVC trim. Use a coil nailer and stainless 8d nails with full round head for PVC trim installation. For indoor trims, the 15-gauge finish nailer works well.
Why use Azek trim?
Because AZEK trim is a PVC material, it’s important to use their proprietary P VC adhesive when connecting joints or adhering components to make larger sizes. It’s the glue that will compensate for any movement and keep your joints and connections from separating.
Is Azek trim a structural product?
AZEK trim is not a structural product, so that should be accounted for when planning your project.
Can you use nails on Azek trim?
This option will provide you a nice, finished look. If you choose to use nails, you will have to use a full round head, smooth nail with a shank size that you can’t bend in your hand. Once again, consult the installation PDF for further instructions.
Can Azek trim be sanded?
AZEK trim shapes like wood for the most part. Material can be adhered, routed, cut, lathed, milled and sanded to just about any shape imaginable! There are a couple of things to expect. First, work with it like it’s finish material. And secondly, the dust created has a lot of static electricity so it clings to everything (Clothes, tools, etc.) Solution? Get some anti-static spray and spray your clothing, your tools and anything else you want to clean up more easily.
Does Azek trim have expansion?
Be mindful of AZEK’s expansion and contraction. It’s important to understand that AZEK trim has a higher expansion/contraction value than wood, so it’s very important to follow their recommended gluing and fastening systems.
Does Azek trim need bondo?
Plus, AZEK trim has a great system for specialty post wraps. Another feature with AZEK trim is a hidden fastening system that consists of a counter-sunk screw and plug (which incidentally doesn’t need to be glued or finished). Bondo can also be used on AZEK trim, as well as caulking, primer, and vinyl safe paint.
Is Azek trim good for longevity?
With today’s modern materials, there are a whole slew of wood alternatives that may be a better fit for specific applications. For this project, we felt that AZEK trim would be the best choice for longevity and low maintenance.
Do Azek trims need paint?
AZEK Trim products do not require paint for protection, but may be painted to achieve a custom color or to cover nail holes that have been filled. However, PaintPro Trim must be painted and also must be painted within 180 days of outdoor UV exposure.
Can you use mild detergent on Azek trim?
When using cleaners other than a mixture of mild detergent and water, it is best to test on a small area or a scrap piece of AZEK Trim, to make sure it does not harm the surface or damage the product’s appearance .
Can you use Azek trim in structural applications?
No, AZEK Trim cannot be used in structural applications. WARNING: AZEK Trim products cannot be used in any stress or structural applications. AZEK Trim products can only be used as the decorative part of your application; either wood or metal structural components need to be incorporated for structural applications.
Can you use staples on Azek trim?
IMPORTANT: Staples, brads, and wire nails should never be used. These products have shanks that are too small in diameter to control the thermal expansion and contraction properties of AZEK Trim.
Can you use a nail gun on Azek?
Standard nail guns work well with AZEK Moulding. If using pneumatic tools, use a fastener with a full round head and set the pressure so the fastener goes just beneath the surface of the AZEK board. IMPORTANT: Staples, brads, and wire nails should never be used.
What is azek trim?
Cellular PVC board (polyvinyl chloride) azek trim is a close cousin of the familiar white plastic plumbing pipes. (The “cellular” part just means it’s filled with zillions of tiny air bubbles to make the material lighter and less expensive to manufacture.)
How to make a trim for corners?
Start by ripping 45-degree bevels on one edge of each board on a table saw. Then push the bevel tips together tightly and tape the boards together with packaging or duct tape. Apply cement to both bevels, then fold the boards together and clamp the joint for about 15 minutes with more strips of tape.
What is the advantage of PVC seams?
Cement seams for sturdy, watertight joints. One advantage of PVC is that you can “weld” joints to keep them tight and prevent water from penetrating behind the trim. Manufacturers recommend a special type of PVC cement that has a longer “open time” than the type of cement that plumbers use on plastic pipes.
How thick is PVC trim?
PVC trim is sold in 5/4 (1-in.) and 4/4 (3/4-in.) thicknesses in the common widths found with wood. But the selection may be limited. You’ll probably have to special-order some thicknesses and widths. PVC trim boards are sometimes only sold in 18-ft. lengths, so you may want to have your order delivered.
Is PVC trim cheap?
PVC trim isn’t cheap; expect to pay about the same price you’d pay for clear, knot-free wood. Other PVC products are also available, including preformed outside corners, tongue-and-groove boards, and sheet goods that you can carve up and work just like plywood. Find PVC trim by contacting lumberyards in your area.
Can you use cellular PVC trim like wood?
Although you install cellular PVC azek trim almost like wood, there are a few crucial differences. In this story, we’ll show you those special cutting, joining and fastening techniques so your PVC azek trim will perform flawlessly for the life of your home. Don’t worry—there aren’t any fancy tools or skills required.
Does azek trim absorb water?
PVC azek trim impervious to rot and insect attack and doesn’t absorb water. It holds paint well because water can’t penetrate the material behind the paint. And if you like the look of white trim, you may not have to paint it at all (more on this later).
What is the #1 trim brand?
AZEK®Trim is the #1 brand of trim.
How many FASTENERS ON EACH SIDE OF JOINT?
USE TWO FASTENERS ON EACH SIDE OF JOINT
What to do when cutting Azek plastic trim?
I picked up a handy tip from Mike Guertin: When cutting Azek, or any plastic trim for that matter, spray your clothes with static guard. Otherwise, the "sawdust" from cutting the trim will stick to you like snow in a blizzard.
How long does it take to glue a peice together?
whenever I need to glue small peices together, I use regular pvc glue. You get about 30 seconds of working time, so be fast.
What is caulk spackle?
caulk is for joints. Spackle is for holes. I use bondo
What type of caulk do you use to fill nail holes?
To fill nail holes, you will want to use a polyurethane or acrylic based caulk or exterior spackle.
Does Rustoleum cover Azek?
You may want to reconsider. Most everything will weather differently than the Azek, even the Azek gluelines. I've used Azek and Royal products and there is color variation within the product (less with Azek) enough to look shabby. I've found that Rustoleum will cover well, stick well without surface prep, and has not resulted in any callbacks.
Can you use MH Ready Patch on Azek nails?
I've used MH Ready Patch to fill the Azek holes and had no problems. The bondo can get messy. Maze nails ( http://www.mazenails.com) sells white painted SS nails that make life a lot easier. I learned that on the second round of trim.
Can Makita saws cut cement?
as for cutting it, I have both the cordless and electric Makita saws for cement siding. Put these on an EZ Smart rail and your cutting problems are solved.
