Open the pi-star web address shown in the login screen or click here. (magic!) If http://pi-star/admin doesn’t work try the IP address. The IP address is the box on the right in the screenshot below. Depending on your network it could be a 10.0.x.x or 192.168.x.x IP address.
How do I download the RPI image for my hotspot?
If your hotspot uses a Raspberry Pi, download the RPi image. Pi-Star 4.1.x works for hotspots based on all Raspberry Pi boards, and must be used for hotspots based on a Raspberry Pi 3B+, 3A+, or 4B board. Extract the downloaded Pi-Star image zip file, and then flash the image file itself (ends in .img) to a 4GB or higher microSD card.
How to image a Raspberry Pi on SD card?
The part to look for is “Pi-Star_ RPi “. You’ll also need software to image the Pi’s SD card. The Raspberry Pi Imager will work if you don’t already have one. Extract the .zip downloaded from Pi-Star’s website. This should contain an .img and .md5 file. Checking the file hash is optional but recommended.
What is Pipi-star?
Pi-Star is digital voice software for personal, low-power hotspots, as well as repeaters. It can handle DMR, D‑STAR, and YSF, as well as P25, NXDN, POCSAG, and multiple cross modes when used with a multi-mode digital voice modem that supports those modes.
See more
How do I find the Pi Star IP address?
0:101:33Discover IP Address Pi-Star/ZUMspot - YouTubeYouTubeStart of suggested clipEnd of suggested clipAddress of the Raspberry Pi here's one here the some star. If I select that I now have the IPMoreAddress of the Raspberry Pi here's one here the some star. If I select that I now have the IP address. Where I know it's friendly name as um - star dot local dot.
How do I get to pi star dashboard?
3:335:54How To Get Into the Pi-Star Dashboard - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo we just type in PI - star. And then the password is raspberry all lowercase R is P the the Y. AndMoreSo we just type in PI - star. And then the password is raspberry all lowercase R is P the the Y. And sign in and yeah we'll save that.
What is a PI star?
Pi-star is a system of pre-packaged software and firmware that permits a Hotspot to be implemented on a Raspberry Pi (software) and ARM-based controller of an Analog Devices 7021 RF modem (firmware). Pi-star permits many of the Hotspot functions to be performed via a web interface.
How do I connect Pi Star to WiFi?
1:353:35Pi Star initial WiFi set up - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll right now you're going to take your your SD card which you just freshly. Made with the PI starMoreAll right now you're going to take your your SD card which you just freshly. Made with the PI star image on it and you put your text file on there for your wireless network. You're going to plug that
How do you restore a PI star?
If you want, or need, to restore a configuration file use the “Browse” window to locate the. zip file you wish to load onto the hotspot. Then click the green up arrow to upload (restore) the file to your hotspot.
Can not connect to PI star?
The most reliable solution I've found is to shut down Pi-Star, power off the hotspot, and then quickly power it back on. After that, it often starts up properly in Read-Only mode. Sometimes it works to re-run Pi-Star Update and then Pi-Star Upgrade (even if you're on the latest version).
How do you SSH into pi stars?
0:363:34Using Windows ssh to ssh into pi-star - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd I'm going to use the syntax of SSH the username PI star for PI stars the default username on allMoreAnd I'm going to use the syntax of SSH the username PI star for PI stars the default username on all your hot spots the same username and password you'd use access the web page in the admin mode.
What does Mmdvm stand for?
MMDVM stands for Multi Mode Digital Voice Modem. There are alternatives on the market and some run as much as $200, but the Jumbo Spot I found costs $85 shipped from California.
How do you use Ysf with a pi star?
Open your Pi-star dashboard and select Configuration. Change the setting of YSF Mode to switch it on. Then click on Apply Changes. When the Pi-star restarts there will be a new Yaesu System Fusion Configuration section appear, beneath the DMR Configuration one.
How do I add a hotspot to BrandMeister?
How to proceed ?Login to your BrandMeister Selfcare.On the top right, click on your Callsign.Click on the “SelfCare” option.At the bottom of the page, check the box “Hotspot Security”A password box will appear. Enter your personalized hotspot password and click “Save”.
Why is DMR net yellow on Pi star?
Additional note: If you have updated to dashboard version 20210312 or later and this update changes your DMR Master, on the Admin page in the Network Status module, DMR Net might be highlighted yellow, which means one of your DMR services is failing to log in.
What is a Sigma Antibond?
0:016:16Sigma and Pi Bonds Explained, Basic Introduction, Chemistry - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo what you need to know is that a single bond is a sigma bond a double bond contains one sigma. AndMoreSo what you need to know is that a single bond is a sigma bond a double bond contains one sigma. And one pi bond a triple bond contains one sigma and two pi bonds.
How does a DMR hotspot work?
A hotspot, simply put, is your internet gateway to a particular DMR network. You would use a hotspot when you either don't have a DMR repeater nearby, or simply don't want to tie it up for any length of time.
How is a nodal plane produced in molecular orbitals?
The difference results in the overlap of orbital lobes with opposite signs, which produces a nodal plane perpendicular to the internuclear axis; hence it is an antibonding molecular orbital, called a pi star (π*) orbital An antibonding molecular orbital formed from the difference of the side-to-side interactions of two ...
Is Pi 4.1.0 available for Raspberry Pi?
4.1.0 is available for Raspberry Pi hardware. All the Pi-Star features
Does Orange Pi Zero have GPIO?
Orange Pi Zero gets a new kernel and improved GPIO support.
What is Pi Star?
Pi-Star is digital voice software for personal, low-power hotspots, as well as repeaters. It can handle DMR, D‑STAR, and YSF, as well as P25, NXDN, POCSAG, and multiple cross modes when used with a multi-mode digital voice modem that supports those modes.
What modes does Pi Star support?
Pi-Star supports the capability to run YSF2DMR, YSF2NXDN, and YSF2P25 cross modes. For more info, see Pi-Star cross modes.
How to flash Pi Star to micro SD card?
Extract the downloaded Pi-Star image zip file, and then flash the image file itself (ends in .img) to a 4GB or higher microSD card. A good app for this is Etcher by balena, available for Windows, Mac, and Linux.
When will Pi Star V4.1.x be released?
Pi-Star V4.1.x was released as a regular version on Mar 26, 2020. It can be downloaded from the Pi-Star website (now at V4.1.5): Pi-Star_RPi_V4.1.5_21-Jun-2021.zip.
Is Pi Star a software?
There's one aspect of Pi-Star some people don't quite understand that sometimes leads to confusion about feature requests: Pi-Star is a well-made software package built upon and depending on components other people are coding, including the MMDVM suite by Jonathan, G4KLX, and the firmware by Andy, CA6JAU.
Can I use Pi Star 4.1.x on a Raspberry Pi?
If your hotspot uses a Raspberry Pi, download the RPi image. Pi-Star 4.1.x works for hotspots based on all Raspberry Pi boards, and must be used for hotspots based on a Raspberry Pi 3B+, 3A+, or 4B board.
Does Raspberry Pi 3 have an AP?
The Auto AP feature, which works with the Raspberry Pi 3 and Zero W, was added in version 3.4.11. If the feature is enabled (which is the default), after Pi-Star boots up (takes about a minute), it will attempt to connect to a known WiFi network. If it can't connect within another two minutes after boot up, Auto AP automatically activates its own network access point, which you can use to connect to Pi-Star in order to configure WiFi settings.
What is Pi Star update?
The less frequent Pi-Star version upgrades makes operating system-level changes to the system services and packages required to support new features. Both the update and upgrade processes automatically switch Pi-Star into Read-Write mode, so there's no need to switch manually.
Does Pi Star backup have a password?
Remote Access Password – Since Pi-Star backup does not back up this password, if you want to use your own password, which is a good idea, you'll need to enter your own password. It's also a good idea to make a new backup of your Pi-Star V4 configuration. For more info, see Backing up and restoring Pi-Star.
Can you upgrade Pi Star V3 to V4?
If you're upgrading an existing hotspot from Pi-Star V3.#.## to Pi-Star V4: Due to the complexity of the OS upgrade, you can't just click the Upgrade link or run sudo pistar-upgrade. (Yep, Andy has spoiled us!) However, there's a shortcut that can make the upgrade easier. Just watch this short (3 min) tutorial video by Craig, W1MSG: Upgrade to 4.0.
