How to Fit a Lock to a Shed or Outbuilding Door
- Position the Bolt on the Door. Firstly place the bolt on the door in the position where you would like it to go. ...
- Insert Your First Screw. ...
- Get the Bolt Level. ...
- Insert the Remaining Screws. ...
- Drill Holes and Fit Bolts. ...
- Position the Keep and Get it Level. ...
- Drill Holes and Insert Bolts to Bolt Keep. ...
What kind of lock do I need for a shed door?
This lock enables a door such as this to be locked securely with a 20mm square steel bolt into a keep made of 3mm folded steel securely coach screwed to the door lining. On the outside of the door all that can be seen is a discreet brass plate, so this fits in well with most shed door designs.
How do you secure a shed?
You can use security screws, but these can be ripped out of wood door or frame with a pry bar. By using bolts with a steel plate on the other side of the door will make it much harder to rip the hasp off of your shed. 5. Doors, Door Frames Hollow core doors are practically useless when it comes to providing security for your shed.
How to lock a shed door with a recess?
The recess was cut with a mallet and chisel as was the hole through the door to accommodate the dowel and door handle. If you are going to install a lock on a shed door like this then a rim lock, surface mounted to the back face of the door is the way to go. A modern version of the rim lock is the 'long throw bolt' type lock.
How to hang a shed door?
How to hang a shed door Checks to undertake before you start to hang a shed door. Measure across the diagonals of the door and also the opening... Lift the shed door to trial install it in position. Once you have confirmed the door will actually fit the hole lift it... Installing hinges on the shed ...
How do I install a shed lock?
0:041:467' Shed Door Latch Installation - YouTubeYouTubeStart of suggested clipEnd of suggested clipPlace the left door latch bracket on the left door so the square hole in the bracket aligns with aMorePlace the left door latch bracket on the left door so the square hole in the bracket aligns with a square hole in the door secure. The bracket to the door using a carriage bolt washer.
How does a shed door lock work?
0:474:46Locking T-Handle for shed, barn, camper or garage door. - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo a t-handle in case you've never used one is simply as I said a locking handle with a shaft inMoreSo a t-handle in case you've never used one is simply as I said a locking handle with a shaft in this case a three and a half inch shaft.
What is the best type of lock for a shed?
Compare the best shed locksProductNumber of keysBest overallABUS Diskus2Budget pickMaster Lock ProSeries 6230N2Best deadboltSchlage B60N2Best hidden shackleMaster Lock ProSeries 6271N41 more row•May 29, 2020
How do you fit a hasp and staple to a shed?
0:083:02Master Lock Hasp Installation - Standard and Hinged HaspsYouTubeStart of suggested clipEnd of suggested clipTo verify fit hasp assembly should fit flat against the closed door with the locking eye centered inMoreTo verify fit hasp assembly should fit flat against the closed door with the locking eye centered in the opening of the hasp. Arm. Remove the hasp arm away from the locking eye.
How do you remove a lock from a shed door?
0:101:57How To Remove Handle Lock From The Door - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can use a skewer or a nail or something along these lines. And you go through and you depressMoreYou can use a skewer or a nail or something along these lines. And you go through and you depress that button and then pull your knob. Off. Once the knob comes off go to the back of the lock.
What are shed locks called?
Shed Door Locks are the first line of defence to keep unwanted visitors out of your shed. The type of shed door lock that you use is driven by the type of door on your shed. A fully framed door can have a mortice lock in the same way that you have for your house.
Is a combination lock better than a key lock?
The simple answer is no. The mechanism of a combination padlock is such that it cannot be as strong as a keyed padlock. A combination padlock can also be cracked over time simply be trying each code in turn.
How do I install a hasp lock?
1:553:02Master Lock | Hasp Installation - Standard and Hinged HaspsYouTubeStart of suggested clipEnd of suggested clipFit carefully open the arm while holding it in place and mark the screw holes drill pilot holes toMoreFit carefully open the arm while holding it in place and mark the screw holes drill pilot holes to make sure that wood does not split when installing screws.
How do you secure a shed securely?
How to Secure Your Shed, and Stop Break-insChoose the Location Carefully. ... Anchor the Shed. ... Replace the Door Hinge. ... Improve the Lock. ... Obscure Windows. ... Fit an Alarm. ... Put Tools Away at Night. ... Use a Site Box for Smaller Items.More items...•
Are hasp and staple locks secure?
Hasp and staple fittings are usually used to secure outdoor buildings or gates, with use of a padlock. The hasp is fitted to the door, gate or storage box, and fits over the staple so it can be secured with the lock. The range includes a choice of materials and finishes.
What is a press lock?
Ref: LRL200. Description: Simple steel locks for low security uses, such as garden sheds and cupboard doors. These locks are not supplied with keepers as they are not normally used for architectural purposes and so a small slot is cut into the jamb to receive the bolt.
How do you secure a metal shed door?
0:001:01How To Make Your Shed Burglar Proof - YouTubeYouTubeStart of suggested clipEnd of suggested clipShut doors are usually mounted in place with surface mounted hinges which are great cos are nice andMoreShut doors are usually mounted in place with surface mounted hinges which are great cos are nice and strong and really easy to install. The problem is they're not that secure. Even if you have a
How do you lock a sliding shed door?
1:164:52#34 Lock a Roller Shed Door Tight | At The Ranch - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you're bringing the door shut in front of your tractor. And when it comes to the end we put on aMoreSo you're bringing the door shut in front of your tractor. And when it comes to the end we put on a heavy metal bracket that keeps the door from swinging.
What type of lock do you need for a garden shed?
The type of lock DIY Doctor would recommend fitting to a garden shed or any type of outhouse is called a Brenton Lock or bolt.
How to remove lock keep?
Remove the keep and then drill a pilot hole in the mark you have just made. Place the lock keep in the correct location and level it up securing it first using screws. Now, take the keep and place it back in position and screw in a screw. As before, don’t do it too tight yet. Take your spirit level and level the keep up.
How to tighten a bolt on a door?
Insert each bolt and then on the inside, add your large washers and nuts. Tighten each nut up securely using a spanner or socket and you should now be done! Close the door up and extend the bolt so that the door is locked to test your skills.
Why is the hole in a bolt always square?
The hole in the metal is always square and larger than the thread of the bolt. This is because the underside of the bolt head is also square (See A in the image left) and this piece of the bolt fits snugly in the hole to stop the head of the bolt turning when you are tightening the nut on the other side.
How to keep a door from binding?
Close the door up and then extend the bolt out as if you were locking it up. Take the keep and place it over the bolt so that the bolt section is totally covered. Ensure that there is a little movement top and bottom within the keep so that bolt does not bind and make it awkward to close/
Is shed and garden security good?
Shed and garden security offers a very good return for your money as insurance premiums can be lowered if you have adequate security on any out-buildings as most insurance companies consider out-house equipment to be the most vulnerable when it comes to thieves.
Can a bolt be pulled through a door?
As you can see from the image below, the bolts pass through the door and, before the nuts are put on, a large washer is placed over the bolt. This makes it impossible for the bolt to be pulled through the door.
Where are locks on ledged doors?
Locks for ledged and braced doors are normally fixed to the central ledger at the mid-height. You do see some sheds that have locks fixed to the upper and lower ledgers as well. But having three locks to undo must make opening the door a bit of a chore.
What is a shed door bar?
Shed door bars are an extra level of security on top of that provided by a lock. The most basic designs is a removable steel bar that is locked in place across the mid-height of the door. This bar helps to protect the door lock by preventing the door being moved outwards.
What is a padlock protector?
The padlock protector is a metal shroud that is built into the hasp that covers the top section of the padlock. This extra layer of metal makes it more difficult for any would-be thief to cut their way in. The final shed door lock in this section is door bars.
How to use dome head square neck bolts?
Use dome head square neck bolts to secure the housing and receiver to make the fixings as secure as possible. The dome head means that the only way of removing the hardware from the outside of the door is by cutting it off. The bolts pass right through the door frame or the door ledger.
What is the least secure door lock?
Rim locks are the least secure of the options. The lock is fixed to the inside of the door with wood screws. The door catch secures into a strike plate or keep, fixed to the frame of the door.
Where should bar fixings be fixed?
For both varieties, the bar fixings should be fixed to the shed frame (rather than the cladding/siding) for maximum effect.
Can you lock equipment in a shed?
The answer is no, there is a bit of hardware called a Shed Equipment Anchor that enables you to securely lock equipment to the frame of your shed. It is yet another hurdle for a potential intruder to overcome.
How to level a door with a hammer?
Using wedges to line and level the door. Use a hammer to tap the wedges in to make adjustments to the doors position. Tap both wedges equally an equal amount to raise/lower the door. Tap a wedge on one side only to raise or lower that side. The aim here is to get a nice even gap around the perimeter of the door.
Where should a door stop be installed?
Make sure that a door stop is installed around the perimeter of the door opening.
What to do if a door isn't square?
If the frame or the door isn't square then you will need to work out where the out of squareness if any of the door needs to be cut off. A small amount of timber (up to about 5mm say) can be taken off by using a plane (a hand or electrical plane), anymore than this and you will need to use a saw.
How to measure a door to make sure it is square?
Measure across the diagonals of the door and also the opening to confirm that they are square. You could also measure the principal dimensions (door width and height) to make sure that the door fits the opening. Though this will rapidly become apparent when you trial lift the door into position.
Can you lift a door into position?
Once you have confirmed the door will actually fit the hole lift it into position. You can see from the picture at the top of the page that I had screwed the hinges to the door before lifting the door into position.
Do you need to install a latch on a shed door?
Fitting the hinges is only part of hanging a shed door. You will also need to install a latch and/or lock and possibly a handle as well.
What will affect the type of locks on a shed?
The materials your shed is made from will have a major impact on the type of shed locks you can install and expect a certain amount of security from.
What are the factors that affect the quality of a shed lock?
2. Humidity and Rain. If you live in an area where it rains a lot or suffers from high levels of humidity, you need to keep this in mind as you search for the right shed locks. Cheap padlocks, door handle locks, and electronic locks can be seriously affected by water and humidity.
How many types of door locks are there?
There are essentially six different types of door lock you can use to secure your shed, each of which has their own benefits and issues you should consider.
Why do my locks freeze shut?
These locks also tend to freeze shut if you live where it snows or is extremely cold in the winter months.
Do door handles have built in locks?
Door handles that have their own built-in locks are great for bedroom doors or house doors with a deadbolt installed. So, if you are going to install a door handle with a built-in lock, you should be prepared to install a deadbolt for added security. These locks range in price from cheap and ineffective too expensive and more effective.
Can you install a cylinder lock in a door?
You can also install a cylinder type lock directly in your door , if it didn't come with one already installed.
Can a bolt cutter cut through a lock bar?
They might be “bullet proof” as their ads claim, but a determined thief with bolt cutters can slice right through the locking bar. Cheap locks are made with steel internal parts rather than stainless steel or brass, because of this they can and frequently do rust shut.
What size door lock for a shed?
With its 5 ½ shaft length, the Doors & Door Hardware 5-1/2″ Black L Handle Door Lock Set is perfect for heavy-duty use. It can fit doors that are up to 4 ½ thick and works well as a double door shed lock. I’ve used this one for my steel shed that is 4 inches thick, and, surprisingly, there is still room for adjustments.
How thick is a shed lock?
Furthermore, this lock is also highly recommended for shed doors that are thick since it can fit into doors with a thickness of up to 5 ½ inches.
What is the best lock for a shed?
Choose a weatherproof lock since you intend it for outdoor use on your shed doors. In my opinion, stainless steel locks with all-weather crews are the best options.
What is the black powder coated on a shed door?
I appreciate that the shed door lock’s handles and the screws are black powder-coated. Such construction prevents the door lock from rusting and corrosion, especially when exposed to harsh environments, like storms and the sun’s scorching heat.
What is a master lock 40DPF?
The Master Lock 40DPF Stainless Steel Discus Padlock offers strength and security with its stainless steel construction and a hardened steel shackle. With its materials, the lock is made durable and reliable.
What is a storage shed lock?
Designed for maximum security, the lock is made to protect possessions inside our storage shed from burglars. Furthermore, it suffices for van, garage, and commercial vehicles. Others install this lock vending machine, heavy-duty door, enclosed trailer, cargo trailers, shipping container, and more.
What is a black T handle lock?
A shed lock that is widely used, the Black T-Handle Lock is ideal for outdoor use with its excellent lock features. From what I see, this device is perfect for the doors of the barns, chicken coops, sheds, and backyard playhouses.
What is a padlock in a shed?
The shed padlock is just that, a pad-lock that is put around either the Hasp & Staple or on the pad bolt. This is the most traditional way to secure your shed. Padlocks come in hundreds of different shapes and sizes, key or combination.
What is the best security for a shed?
We can use laminated glass or grills, strong locks to the doors and lastly look at securing the structure all the above will give the best security to our garden shed.
How to retain shoot bolt?
As you can see from the image above as the shoot bolt folds down you can then slip the padlock through the hole to retain the shoot bolt.
What is a combination door lock?
The combination digital door lock is a good mechanical digital door lock that is a versatile and cost-effective way of securing your shed. Using this type of lock is very handy if like me you don’t carry keys often.
How do I fix a combination shoot bolt?
Fixing the combination shoot bolt is very simple just insert a fixing into each hole make sure that the two parts are lined up correctly.
What type of glass is used in a shed?
Most shed only have 3 mm horticultural glass , this type of glass can even be broken by a bird flying into it. This being the case it does nothing for your shed security. Others have perspex for there windows.
Can you use screws on a hasp and staple?
While fitting the Hasp & Staple you could use screws as the fixings as they are all covered by parts of the Hasp & Staple. If you keep high-value items or items that would be difficult to replace then I would suggest you use some small bolts.
