Usually, the problem is easy to fix, though the procedures vary depending on what type of tub stopper you have. Place the plunger, threaded rod, and trip lever back into the hole in the tub and screw the plate back into place. Close the stopper, run some water into the tub, and see if it stays.
How to fix a stuck bathtub drain lever?
Jan 16, 2014 · This Old House plumbing and heating expert Richard Trethewey shows how to adjust a leaky tub stopper. (See below for tools.)SUBSCRIBE to This Old House: http...
How do you fix a stuck pop up stopper on a bathtub?
How to Fix a Bathtub Pop-Up Drain Stopper. Remove the screws that secure the overflow cover plate. Pull the plate and lever away from the overflow hole, partially pulling out the mechanism. Adjust the nut on the linkage—lengthen it to raise the stopper or shorten it to let it drop lower.
How to replace a bathtub overflow plate?
Nov 03, 2012 · For more information or a written out step by step you can stop by http://www.thediyguy.net/2012/11/bath-tub-trip-lever-bath-tub-stopper-replacement-or-adjus...
How do I know if my bathtub trip lever is bad?
Sep 02, 2016 · Check out the video to see how to do a quick fix! Is it impossible to keep the water in your bathtub? You might have a stuck Drain Lever. Check out …
How does a tub trip lever work?
With the trip lever down, the plunger is lifted and the drain is open; when the trip lever is up, the plunger is forced down and the drain is closed. And if the tub is accidentally overfilled, excess water can still run down the overflow tube behind the trip-lever plate and can drain away because the plunger is hollow.Jan 11, 2021
How do you fix a bathtub drain that won't stay closed?
0:241:35Bathroom Repair : How to Repair a Pop-Up Tub Drain Stopper - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse a screwdriver usually a flat bladed. This portion will unscrew out.MoreUse a screwdriver usually a flat bladed. This portion will unscrew out.
How do you fix a pop-up drain stopper?
0:007:55Fix a Pop Up Drain Stopper That is Stuck | Dont Buy a New PopperYouTubeStart of suggested clipEnd of suggested clipAnd you can push it on it it'll pop. Up you push it down to stop the water from draining. And youMoreAnd you can push it on it it'll pop. Up you push it down to stop the water from draining. And you should be able to push on it and it releases and the water drains well this one is stuck.
Why won't my pop-up plug stay down?
If the stopper moves as it should but doesn't stay put, all you need to do is tighten the nut (turn it clockwise). If the action is too stiff, loosen the nut a little. Check the action and adjust until it feels about right.
How Trip-Lever Drain Stoppers Work
First, it's important to understand something about how this style of drain stopper works.
How to Fix a Lift-Bucket Drain Stopper
A trip-lever drain stopper that uses a lift-bucket plunger can be identified by the absence of a pop-up stopper in the drain opening. When problems occur with this type of drain, it is for one of two reasons:
How to Fix a Pop-Up Drain Stopper
A trip-lever drain that operates a pop-up stopper uses a slightly different mechanism. Rather than a lift-bucket plunger that seals a drain opening at the bottom of the overflow tube, there is a spring at the end of the connecting rod.
How a Pop-Up Stopper Works
Pop-ups are simple mechanical devices that use a system of links and levers to move a drain stoppers up and down to seal a sink bowl or bathtub.
How to Remove a Bathtub Pop-Up Drain Stopper
It’s easy to remove a tub stopper to check it for mechanical problems or blockage. You’ll encounter a couple of different types of bathtub pop-ups: old-style mechanisms like the one shown in our illustration above, and newer spring-loaded pop-ups.
How to Fix a Sink Pop-Up Drain Stopper
Water may leak or refuse to drain around a sink pop-up for a number of reasons. If your sink pop-up won’t pop up or seat properly, fixing it is quite easy—usually just a matter of adjusting a few parts. The culprit is often a buildup of hair around the base of the stopper or the pivot rod mechanism.
Why is my bathtub not draining?
You might also encounter the problem of your tub not draining because your trip valve seems to be stuck. This is another indication that your trip lever may need some attention.
How does a trip lever work?
The trip lever functions because the switch part of the lever is connected by a metal link system to a metal rod behind the bathtub walls, allowing you to push down or pull up on the bathtub drain stopper.
What is a trip lever?
A trip lever is the device that you either flip up or down on your bathtub to lift or drop the stopper in the bottom of the bathtub. It is a mechanism that is hidden behind the walls of the tub that you control through a toggle switch located on the overflow drain. Since the mechanism is hidden, the only way to know if something is wrong with ...