The easiest way to have your Pride Mobility scooter repaired is by dialing the number on your scooter’s warranty (800-800-4258) and speaking with a representative. They’ll be able to tell you about repair shops in your area that will know how to help you.
Full Answer
How do I troubleshoot my Pride Mobility scooter?
Pride Mobility Scooter User Manuals and Where to Find Them The simplest way to troubleshoot your pride mobility scooter is by consulting the user manual, which you will receive from your supplier when purchasing a new mobility scooter. If you do not have the hard copy, you can find the online manuals from the following sources.
How do I get my mobility scooter serviced?
Regular service checks are vital to keeping your scooter running smoothly. Motorized scooters must be serviced by an authorized Pride provider. Our providers are trained to perform diagnostic testing and repairs. Give your provider a call and schedule an appointment if you need service for your mobility scooter.
What should I do if my Scooter doesn't work?
If your scooter still doesn't work it may be time to call your local mobility store for help. If you're in Oxfordshire or Berkshire, call us. Our experienced engineer will get you up and running as soon as possible. We look forward to hearing from you.
Why choose pride® electric scooters?
When it comes to mobility solutions, Pride® electric scooters are in a class of their own. With different models that will cater to your specific needs, there is a scooter for every budget and application.
Where is the reset button on my Pride Mobility scooter?
Reset Button Naturally, all the electrical systems go offline when the breaker trips. This will cause the reset button to pop out at the rear section of your scooter. Please allow the electronics a few minutes to cool down before you push the reset button to release the breaker.
Why is my mobility scooter not working?
Batteries. The most common cause of mobility scooter breakdowns is the battery. With constant charging and discharging, scooter batteries lose their ability to hold charge.
How do I reset my electric mobility scooter?
If the scooter is over loaded, the circuit breaker may trip and shut off power to the motor. Correct the riding condition that caused the over load, wait a few seconds, and then push the reset button to reset the circuit.
Why is my mobility scooter beeping and not moving?
Beep Codes. Condition: The battery voltage is to low and can not power up the scooter. Solution: Replace charge the scooter completely, or replace the batteries. Condition: The battery voltage is to high and the scooter can not operate.
What is the average life of a mobility scooter?
A typical mobility scooter will last eighteen to twenty-four months with proper care and usage.
Why is my electric scooter not moving?
When your electric scooter doesn't respond, check if the main ignition fuses are turned on. If it's not, switch it on, and start the engine again. If it doesn't start, you need to replace it with a new fuse. It's best to have a technician remove and replace your broken fuse for your safety.
Where is the fuse on electric scooter?
All electric scooter have a fuse or a circuit breaker. Circuit breakers are usually on the outside of the scooter. Fuses are usually located on the outside of the scooter or under the footplate in the wiring harness near the battery pack.
How do you test a mobility scooter motor?
0:010:46How To Test Motor Resistance For A Mobility Scooter - YouTubeYouTubeStart of suggested clipEnd of suggested clipThat the proper reading for ohms of a functioning motor is going to be 0.5 to 1.5 ohms so it's halfMoreThat the proper reading for ohms of a functioning motor is going to be 0.5 to 1.5 ohms so it's half an ohm to 1.5 ohms so as you can see. This one here is within the range it's 0.5.
Why Does My Pride Mobility scooter keep beeping?
If you hear two beeps from the Pride Go-Go Sport, then the battery voltage is too low to operate the mobility scooter for traveling, according to the mobility scooter forum. The solution to this problem is to completely charge the Pride Go-Go Sport until the meter on the device indicates completion.
Why does my mobility scooter Beep 5 times?
If your Pride Mobility Go-Go Scooter Scooter beeps 5 times, the solenoid brake trip has occurred. The freewheel lever may be in the freewheel position.
Why is my mobility scooter making a noise?
All scooters make electrical, motor and mechanical noises when they operate. They can also make a variety of road surface noises including rumbling and clicking. It's impossible to tell if the sound is "normal". As they break in and age, noises can change in pitch, volume or general sound.
Why is the green light flashing on my mobility scooter?
If the charging indicator is green, this means the battery is fully charged. In this case, the battery charger must be disconnected from the battery so as not to cause overcharging. If the charging indicator is flashing alternate red/green, this indicates there is an electrical problem with the battery pack.
Where is the fuse on a mobility scooter?
Under the seat and shroud are the batteries. To gain access to the batteries and the in-line fuses, you must first remove the seat and then remove the shroud. There is a fuse box containing a fuse on the battery cable for each battery.
How do you test a motor on a mobility scooter?
0:010:46How To Test Motor Resistance For A Mobility Scooter - YouTubeYouTubeStart of suggested clipEnd of suggested clipThat the proper reading for ohms of a functioning motor is going to be 0.5 to 1.5 ohms so it's halfMoreThat the proper reading for ohms of a functioning motor is going to be 0.5 to 1.5 ohms so it's half an ohm to 1.5 ohms so as you can see. This one here is within the range it's 0.5.
Where is the battery in a mobility scooter?
0:151:50How to Change the Batteries on a Mobility Scooter - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe rear cowling should lift off easily from the scooter. Place this to one side beforeMoreThe rear cowling should lift off easily from the scooter. Place this to one side before disconnecting the batteries from the scooter electrics.
How to get technical assistance for a Pride scooter?
Getting technical assistance for your mobility scooter requires getting in touch with an authorized Pride® dealer. We recommend reaching out to the provider where you bought the scooter originally. If you need to find a mobility scooter repair service near you, we make the process simple.
What to do if you have a scooter problem?
If you are experiencing difficulties with your scooter, it may be time to take it to a mobility scooter repair service provider. Authorized Pride® dealers employ technicians that are knowledgeable in how our products work.
What is Covered by the Pride Warranty?
Pride Mobility covers some scooter parts. You can easily find the pride warranty information on our website.
How to find a dealer for a mobility scooter?
Once you type in your address and select your product type, you can click the Click Here to Find Nearest Dealer button. This brings you to the search results. You can see a list of mobility scooter dealers in that area, their addresses and phone numbers. You can also expand your options by using the dropdown mileage menu to find dealers anywhere between 15 miles to 250 miles from the location you inputted.
Do scooter dealers have warranty?
It is important to know that when dealers sell the scooters to customers, they may offer their own warranty. To learn which parts and services are covered by their specific warranty, please contact them for more information.
How often should I charge my scooter?
To maximize your battery range we recommend charging the unit daily if you use it daily. If you use the scooter less than daily a once a week maintenance charge is recommended. Please feel free to reach out if you have any additional questions.
Does Medicare require a face to face exam for a scooter?
Medicare requires a face-to-face examination with your physician prior to writing a prescription for a power mobility device. During your exam, your physician must first consider the use of cane, walker, and manual wheelchair before considering a motorized scooter.
Does insurance cover scooter repairs?
Call the number listed on your insurance card and speak to a representative. If your insurance doesn’t cover motorized scooter repairs and you need help paying for the repairs, there are options available.
Does Pride accept credit cards?
Many Pride providers accept credit cards, cash or money orders for their services. They may also offer financing options. Over hundreds of Pride providers participate with CareCredit, a credit card that allows you to pay for medical equipment and services over time. The payment plan is based on your budget.
Do we have replacement keys for a scooter?
I’ll be happy to help point you in the right direction. We do have replacement keys for our scooter, however to ensure that the you select the correct key please send your serial number to: [email protected]
Is an electric scooter considered medical equipment?
If your electric scooter is prescribed by a doctor, your scooter may be considered medical equipment . Medicare Part B may cover a portion of the cost of a power mobility device, such as a motorized scooter, if it is medically necessary.
How to clean scooter batteries?
Keep Batteries Clean: Just like the batteries on your car, there can be buildup on your scooter batteries. Check them regularly and clean them with a wire brush or battery cleaner spray.
How to fix a scooter ignition switch?
The Solution: Before replacing the entire ignition switch, disconnect the scooter’s batteries and try to clean it. You can use a pressurized can of air to blow dirt and grime out of the ignition, which may be enough to fix it.
What happens if you wear your scooter tires?
Over time, the tread on your tires will wear down, making them ineffective. Similarly, the inner tubes in your tires may also deteriorate or be punctured. Worn/flat tires make your mobility scooter inefficient at best and outright dangerous at worst.
Why does my scooter battery wear down?
The Cause: Batteries wear down over time. If you’ve had your mobility scooter for a few years, or tend to run the battery all the way down each time you use it, chances are it will show signs of degrading. This could lead to loss of speed, range, and even a non-working mobility scooter.
What does it mean when a scooter is lurching forward?
If you notice your scooter is “lurching” forward randomly while using it, that’s a sign that the motor has begun to fail.
Why do scooter keys break?
They can become corroded over time due to exposure to the elements, and cease working/moving. On top of that, keys are notoriously easy to break, and when they break inside the throttle, they leave behind a hard-to-remove piece of metal.
Why won't my scooter start?
Check Your Connections: Sometimes, the reason your scooter won’t start is simply that the battery is slightly loose in its seat.
What is the most common issue with mobility scooters?
The most common issue our mobility scooter rental customers encounter is a dead battery.
How to get scooter out of freewheel mode?
Then, pull the lever back to reactivate the drive and the brake systems and take your scooter out of freewheel mode. Remove the key from the key switch. Never sit on the scooter when engaging or disengaging the freewheel mode. Stay by the sides. Return the scooter to drive mode after pushing it to lock the brakes.
How to charge a scooter with a key?
Place the front of your scooter near to a standard electrical outlet. Take out the key from the key switch. Take care that the manual freewheel lever is in the drive position. Plug the 3-pin charger power cord into the off-board charger port. Spread out the charger power cord and plug it into the electrical outlet.
Why does my scooter reset?
Reset Button. When the scooter is running on a low battery, the main circuit breaker may trip to prevent damage to the motor and electronics. Naturally, all the electrical systems go offline when the breaker trips. This will cause the reset button to pop out at the rear section of your scooter.
How to contact Get Around Mobility in Las Vegas?
Remember, if at any time you experience an issue with you pride mobility scooter while renting from Get Around Mobility in Las Vegas, you may contact us directly at 702-637-0008 and we will gladly help you get back on track. You may also view the full manual for your scooter rental here.
Can you carry heavy on a scooter?
Weight: Scooters are not made to carry heavy loads. Please ensure you are renting a scooter appropriate for your weight. Try also to limit any access weight, including baggage weight. It’s best to strip it down to the absolute essentials only.
Does Pride scooter have irregular start and stop?
In rare cases, the pride mobility scooter rental may demonstrate irregular functionality. If your mobility scooter rental is exhibiting a start and stop pattern, where the scooter travels a few meters then stops, then goes a few more meters and stops again, please try the following reset methods.
What are the problems with a mobility scooter?
Most mobility scooter proprietors have different issues eventually including lights not working, scooter not start, solidified wheels, consistent signaling sounds, etc. We briefly discuss the most common problems and their solutions to the mobility scooter.
How to start a scooter if you can't evacuate the key?
If you are unable to evacuate the key, you can even now begin the scooter by utilizing a couple of needle-nose forceps to wind the leader of the messed-up key, enabling you to keep utilizing the scooter until you get an opportunity to fix it appropriately.
Why is my scooter engine not working?
It’s hard for it to flop yet not feasible. The most well-known purpose behind engine failure is dampness infiltration. The engine lodging will regularly be shielded from dampness. However, dampness can discover its way in if the engine is presented to a great deal of water or submerged in it.
Why is my scooter breaking?
1. Battery Issues. The most well-known reason for mobility scooter breakdowns is the battery. With steady charging and discharging, scooter batteries lose their capacity to hold a charge. You should check the battery connections with ensuring they are secure and situated appropriately.
What is a fuse on a scooter?
A fuse is wired through many different parts of a mobility scooter. It distributes the electricity to prevents overload. If one specific part of your scooter isn’t working well, considering it’s a blown a fuse. It’s not a big problem; you just have to change the fuse you can do yourself.
What would happen if a scooter was left in the rain?
Coordinating a hose towards the engine, leaving the scooter in the rain, or driving in profound puddles would all be able to make the engine come up short which at that point slices off capacity to the wheels.
How to check if a battery is loose?
If you can, check for any loose wires connecting the engine or battery. Open up the battery and engine compartments. Then check whether any of the wires feel loose or looks strange. If you can’t discover any, request a technician to investigate.
What causes a mobility scooter to break down?
If your mobility scooter breaks down without an obvious reason such as an accident, then the cause is most likely to be found amongst the following issues: battery, motor, tires, potentiometer, controller/joystick, or ignition key . Let us take a closer look at each of these problems and how you can resolve them. 1.
What is a mobility scooter?
Owning a mobility scooter is a life-changing event for disabled or elderly people as they rely on these machines to get around without needing to hire a car service or use walking aids. While they're extremely useful in giving people their independence back as best as possible, mobility scooters are still just like any other mechanical ...
How to find beep code on scooter?
Thus, you can simply look at it for assistance. Alternatively, you can Google your mobility scooter model followed by the number of beeps you are hearing, to view results on what part or system is having an issue.
Why does my scooter's speed potentiometer fail?
Among the most common reasons that potentiometers fail are due to moisture and rust, because they are often exposed to the elements. They can easily suffer from corrosion, which causes the unit to malfunction.
Why is my scooter not traveling?
Your scooter doesn't cover as much distance as it used to: When you start to notice that your mobility scooter isn't able to travel as far as it used to, chances are this is due to a battery malfunction.
Why does my scooter battery fail?
It is to be expected for the battery on a mobility scooter to fail due to constant charging and discharging, which causes the battery to lose its ability to hold a charge.
How many volts should a scooter battery be?
If either one measures below 11 volts, you should dispose of it. A battery that reads 12 volts or more without a load on the scooter is a keeper. Even though most scooter batteries are affordable, you want to keep them in good working condition for as long as possible.
What is a Maxima scooter?
The Maxima 4-Wheel scooter features an upgraded electronics package to deliver heavy-duty performance and value.
Is Pride a scooter?
When it comes to mobility solutions, Pride® electric scooters are in a class of their own. With different models that will cater to your specific needs, there is a scooter for every budget and application. From compact to full-sized, you are sure to find the perfect Pride® motorized scooter.
Can you use a Pride scooter with a touch device?
Touch device users can use touch and swipe gestures. When it comes to mobility solutions, Pride® electric scooters are in a class of their own. With different models that will cater to your specific needs, there is a scooter for every budget and application. From compact to full-sized, you are sure to find the perfect Pride® motorized scooter.
