Use the Allen key to tighten the 4 screws within the rail. Go on back to the base of the banner stand. Put pressure on the area where the banner and leader are connected and gently pull the pin out of the side of the base while maintaining just enough pressure to let the banner retract into the base slowly.
How do I install a retractable banner stand?
Remove screws holding the cover. Carefully remove cover to your retractable banner stand. Tape leader to allow you to roll up tension core easier. Wind up the core to load the spring tension. When at tension install pin to hold core in place. Attach banner to the leader. Slowly let banner rewind into place.
How do I Fix my Pull Up banner?
We also share step by step instructions to fix your pull up banner in the following paragraphs. Remove the end caps on your pull up banner. Remove screws holding the cover. Carefully remove cover to your retractable banner stand. Tape leader to allow you to roll up tension core easier. Wind up the core to load the spring tension.
How do I remove the banner from the base of the stand?
Go on back to the base of the banner stand. Put pressure on the area where the banner and leader are connected and gently pull the pin out of the side of the base while maintaining just enough pressure to let the banner retract into the base slowly.
How do you replace a banner on a table?
Lay a strip of the double sided tape across the top edge of the leader, sticky side down. Now overlap about an inch of the leader with an inch of the bottom of the replacement graphic and tape the sides to the table. Remove the tape backer and press the banner down to stick in place. You can go ahead and untape them from the table now.
How do you retension a retractable banner?
0:031:02How to Re-Tension a Retractable Banner - Quick & Easy - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf your tabletop banner has lost tension start by opening the unit release the bottom roller byMoreIf your tabletop banner has lost tension start by opening the unit release the bottom roller by pushing it to the right and lifting it out. Completely unroll the banner.
How do you change a retractable banner stand?
0:092:04How to Change a Banner in a Retractable Banner Stand - YouTubeYouTubeStart of suggested clipEnd of suggested clipPiece once you find the leader piece you go ahead and put the locking pin into place. Don't take theMorePiece once you find the leader piece you go ahead and put the locking pin into place. Don't take the banner off until you put that locking pin into place once it's in place.
How do retractable banner stands work?
A retractable banner stand includes a spring-like mechanism in the base of the stand which causes the banner to roll up around a roller in the base when it's not in use. Retractable banner stands are also sometimes called roll-up banner stands because of this feature.
How do you take apart a retractable banner?
0:415:02How To Replace A Pull Up Banner by Sign-Age - YouTubeYouTubeStart of suggested clipEnd of suggested clipOkay let that roll up put that just like that now up here at the top remove one of these you takeMoreOkay let that roll up put that just like that now up here at the top remove one of these you take the end caps off. And then this pops apart. Like that once you hear the click it's open.
Can you reuse retractable banner stands?
Good news. You can. Pull up banner replacement graphics are easy to create, and can bring life to an old stand. You can reuse most retractable banner stands.
How do you take apart a banner stand?
DISASSEMBLYDetach the bottom support pole and remove from the banner.Lower the side poles.Detach the top support pole and remove from the banner.Disassemble the hardware and place into the carry case.Roll or fold the banner for transportation/storage.
How do pull up banners work?
Also known as a pull-up banner, they consist of a spring-loaded base attached to a banner with printed graphics. Designed to be pulled up out of the base when you need the display, they can be quickly rolled back when it's time to go, as well. Take the banner out of the carry case.
How do you install a roll up banner?
1:342:57Roll Up CLASSIC - New Banner Installation Instruction by Dolphies ...YouTubeStart of suggested clipEnd of suggested clipMaking sure it's evenly close over the back flip out the legs assemble the bowl hook it onto the topMoreMaking sure it's evenly close over the back flip out the legs assemble the bowl hook it onto the top. And then third the pole into the Sun. Making sure that it goes in all the way down to the roof.
How do you fix a pop up stand?
1:1011:12How to set up your 3x3 Pop up stand with counter and lights by XL DisplaysYouTubeStart of suggested clipEnd of suggested clipOh pop the plastic bag over here. Now when you come to put up your exhibition stand always ensureMoreOh pop the plastic bag over here. Now when you come to put up your exhibition stand always ensure that the purple nodes are positioned at the top of the stand.
How do I change my standee banner?
Change your Standee Banner in 4 Easy StepsStep 1 - Type of Standee & Existing Banner. 1st step is to find out the type whether it is a roll up, x banner, double side roll up. ... Step 2 - Lock standee and remove banner. ... Step 3 Pasting the banner. ... Step 4 - Checking and rolling in.
How do you fix a roll up standee?
0:007:11How To Fix A Pull Up Banner - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd this is how to reset a spring for a silver step you've got this top piece needs to be come offMoreAnd this is how to reset a spring for a silver step you've got this top piece needs to be come off you've got two screws on this side and two on the opposite side same position just use a Philips
How do you assemble a pull up banner?
1:112:38How to Assemble and Using a Pop Up Banner Stand - YouTubeYouTubeStart of suggested clipEnd of suggested clipSimply put the hook into the poll and slowly raise up exposing your image on the front side youMoreSimply put the hook into the poll and slowly raise up exposing your image on the front side you might want to step on the bases feet in order to help stabilize.
What is a retractable banner stand?
Retractable banner stands are awesome trade show displays. They're inexpensive, easy to set up and take down, and easy to transport. You can use just one, or set up four our five for a back wall display.
What to do if playback doesn't begin?
If playback doesn't begin shortly, try restarting your device.
How to clamp a graphic?
Just open the clamp and slide the graphic into the clamp mechanism. Sometimes it takes a little patience to get it into the clamp completely straight. Once your graphic is in the top, secure the clamp to the graphic. Some clamp bars require a hammer or mallet to tap the clamp closed.
Why does my graphic base spin?
Because when you're affixing a new graphic , the tension in the base can be tricky. If it starts to retract before you affix the graphic correctly, it can spin or roll-up the graphic incorrectly, or worse yet, it can spin with no graphic, which means you'll need to take the base apart and re-set the tension (no fun.)
How to attach a graphic to a bar?
I normally affix the top of the graphic to the top bar first. Most top bars use a clamp mechanism. Just open the clamp and slide the graphic into the clamp mechanism. Sometimes it takes a little patience to get it into the clamp completely straight. Once your graphic is in the top, secure the clamp to the graphic. Some clamp bars require a hammer or mallet to tap the clamp closed. Make sure if you use a hammer, that you place a rag or something soft over the clamp so you don't ding the metal bar.
How to remove a graphic from a key?
Once your graphic is secure to the base, and clamped at the top (or being held firmly by a helper,) you can then start to remove the key MAKING SURE YOU HOLD THE BASE FIRMLY BEFORE YOU REMOVE THE KEY. The tension mechanisms are strong, so once you "wiggle" the key out, it's going to want to pull the graphic into the base.
What holds a graphic upright?
The base that you're graphic will affix to and "retract" into when storing or transporting. The top bar that holds the top of your graphic. And the pole, which is used to hold your graphic upright. Most stands feature one of three different types of methods to hold your graphic in place.
What is the best solution for a banner stand's top rail?
The best solution for a banner stand's top rail, adhesive tape AND pressure.
Why is a banner stand cheap?
Most likely, a stand that costs less to purchase because it's made of thinner material. A thin aluminum base is soft, and could pinch and bend. A pole cheaply made could bend, causing your banner to lean or wobble.
Can a banner stand fail?
Truth be told, sometimes a low quality banner stand can fail. The leader strip (the part that connects the banner to the base) can lose adhesion. The top rail can release the banner. Those are big problems (though they can usually be fixed). Other, minor issues can occur as well. A low quality or cheap stand could tilt to one side. Likewise, a cheaper material can curl badly.
Setting up
1) Open up the feet on the base. They should turn so they are perpendicular to the base.
Taking Down
1) Remove the locking pin. Take the locking pin out of the base to engage the retracting mechanism. Now you can clip it into that spot under the base for safe keeping until the next use.
Common problems
One of the most common issues we have heard from customers about with this stand is that the banner won’t retract. While this can be frustrating when you are trying to pack up in a hurry, it is actually very easy to correct.
