27 February 2017 by Tamara Taylor
- First of all you will need to remove the teddy bear's head. ...
- Use a pair of scissors to push a small hole in the bear's fabric where you want the eye to go.
- Take a piece of dental floss and thread it through the eye of a long, thick needle with a large eye. ...
How do you fix a teddy bear that has holes?
Turn the teddy bear inside out to examine each seam for holes and to examine the thread which may be, if the teddy bear is very old, weak and rotten. Sew the holes closed and reinforce the seams as needed, using either a needle and thread or a sewing machine.
How do you fix a Teddy’s eye seam?
Sew the rest of the seam closed and fasten off the thread. You’ll notice that the seam is still pretty visible, and teddy’s eye is a bit bulgy. Take a pin and gently pluck any fur that is stuck in the seam out of the stitching and give it a little brush to fluff it up.
Can you replace a safety eye on a teddy bear?
Sometimes our furry little teddy bear and stuffie friends suffer from a bit too much love and can lose an eye in the process. You can always sew up the hole and add a button or an eye patch, but it’s also possible to replace a safety eye if you take the right steps.
How do you make a Teddy’s eye?
My teddy’s eye is at the end of a seam, but this process will work even if it isn’t. Firstly you will need to cut open a seam nearest to the eye. Make sure you cut the stitching and not the fabric. You’ll need to open the seam two and a half to three inches. You can see where teddy’s eye goes at the end of the seam in this photo.
How to make a teddy bear eye?
How to hide a seam in a sleeve?
How do safety eyes work?
How many inches do you need to open a seam?
Can you replace a safety eye on a teddy bear?
How can I restore my stuffed animals eyes?
Apply the toothpaste to the toy's eyes, working in circular motions, right to the edge of each eye. Now, use a clean, damp cloth to wipe away the toothpaste in a circular polishing motion. Dry the eyes with a clean cloth. If any toothpaste has spread onto the plush toy's fabric, use a dampened cotton bud to remove it.
How do you sew eyes on a stuffed animal?
1:083:53How to Sew the Eyes & Nose on a Stuffed Animal - YouTubeYouTubeStart of suggested clipEnd of suggested clipOkay we're just gonna do a simple very simple eye now you push the needle you go about a quarterMoreOkay we're just gonna do a simple very simple eye now you push the needle you go about a quarter inch in again. And you want to push the needle through and across the head.
How are teddy bear eyes attached?
Glass eyes should not be stitched in like a button, they will wobble around. These eyes must be tied in so that the wire loop slips down in behind the fabric and the eye sits snugly on the surface. For insertion of glass eyes the head is stuffed first.
How do you sew an eye?
8:1613:06How To: Sewing Hook & Eyes - YouTubeYouTubeStart of suggested clipEnd of suggested clipCreated. We'll go through the loop. From the front to the back. And again in an out and through theMoreCreated. We'll go through the loop. From the front to the back. And again in an out and through the loop from the front to the back. And you'll do this again so that it nice. And secure.
How do you sew button eyes on a teddy bear?
5:2911:00Sewing button eyes on your bear - YouTubeYouTubeStart of suggested clipEnd of suggested clipGo right into that loop go around the button see that pull it tight. Make a loop. Around the button.MoreGo right into that loop go around the button see that pull it tight. Make a loop. Around the button. And go right through. It.
How do you attach glass eyes?
0:262:15How to attach Glass eyes on a wire - YouTubeYouTubeStart of suggested clipEnd of suggested clipDirection to the A's point slightly. Out it just gives a slightly more natural expression. So that'sMoreDirection to the A's point slightly. Out it just gives a slightly more natural expression. So that's repeatedly stabbing in the same spot to create a tunnel.
How do you secure safety eyes?
How to use safety eyes. Using safety eyes is really simple. All you have to do is plot where you want them on your stuffed doll (sometimes a crochet pattern will tell you where the eyes should go), stick the post between stitches, and put the washer on the back to secure.
What are safety eyes for stuffed animals?
Safety eyes are an object that you use when you're making things like stuffed animals. They're two pieces that connect with a shiny ball that goes on the outside of your work to make eyes! They come in a variety of sizes and colors.
How do you embroider eyes on a knitted teddy bear?
1:216:42How to embroider the eyes on your knits - YouTubeYouTubeStart of suggested clipEnd of suggested clipFace. So now I just need to do a French knot you probably know this already but reminding it twiceMoreFace. So now I just need to do a French knot you probably know this already but reminding it twice round my needle. And then I take it in again between the strand.
How do you attach eyes to amigurumi?
3:114:46How to put safety eyes on crochet amigurumi - YouTubeYouTubeStart of suggested clipEnd of suggested clipRight there's a flat side and then there's a round side. You want the flat side to face the yarn. SoMoreRight there's a flat side and then there's a round side. You want the flat side to face the yarn. So you could just put it straight on the eye.
How do you sew eyes on amigurumi?
4:388:15How to Embroidery Eyes on Amigurumi - For Bunny ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd now we're going to move one stitch to the left and go up to create that diagonal. Line and thenMoreAnd now we're going to move one stitch to the left and go up to create that diagonal. Line and then i am going to come out another stitch to the left. And to create that upside down b.
How do safety eyes work?
Using safety eyes is really simple. All you have to do is plot where you want them on your stuffed doll (sometimes a crochet pattern will tell you where the eyes should go), stick the post between stitches, and put the washer on the back to secure.
How to get tail thread out of stuffed animal?
Starting at one end of the incision, insert the needle through a small section of the fabric, pull until the tail end of the thread is about 2 inches from being pulled through the fabric. Grab the tail of the thread and tie it to the base of the thread you pulled through the fabric. Tuck the short excess tail thread into the stuffed animal.
What happens when you add more stuffing to a stuffed animal?
The more stuffing added, the more dense the stuffed animal will become.
How to attach a button to a stuffed animal?
Before you begin, place the button in the location where you would like it to be attached. Attach your thread to the stuffed animal in this location, and thread the button onto the needle.
How to make a stuffed animal incision?
Using a pair of scissors, make an incision approximately 3 inches in length along the middle major seam on the back of the stuffed animal (a seam ripper may also be used to open an existing seam).
Where do you pass the needle on a button?
Pass the needle through to the back of the button.
Can you use scissors on stuffed animals?
However, these skills can be used on any stuffed object. Be aware when using scissors and a sharp needle; take any precautions to avoid misuse or injury. Prior sewing and knot tying knowledge is necessary. Adequate lighting is recommended.
Do you need a magnifying glass for needles?
You may need a magnifying glass as the eye of the needle is really small and may be difficult to see.
How to attach a button eye to a stuffed animal?
Place the button eye in the appropriate spot on the stuffed animal's head. Using a needle and the appropriate thread, attach the eye to the head by stitching through the entire head of the animal. Pull the thread completely through to the back.
What to do if a stuffed animal loses its eye?
When your child's stuffed animal loses an eye, don't throw the toy away. Instead, replace the eye and the toy will be as good as new. Even if you have no sewing experiencing, replacing eyes on a stuffed animal is easy. Just follow the instructions below. Advertisement.
How to clean a toy with plastic eyes?
Start with clean hands whenever cleaning a toy. Check what the eyes are made of. Plastic eyes can be damaged by abrasive items removing ink or gouging into the plastic, and heat can melt it. Glass eyes can chip, crack or break if mishandled. Decide whether to spot clean or wash the toy completely.
What is a wikihow?
wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, volunteer authors worked to edit and improve it over time. This article has been viewed 16,883 times. Learn more... Over time, with lots of love and cuddles, a stuffed animal's eyes can start to look scuffed, ...
How to clean eyes with soapy water?
Use a soft cloth to dip into the soapy water. Wring out the water so that the cloth is only damp, then use it to wipe the eyes. Avoid getting water behind or in the eyes. The cloth must only be damp, not saturated and wet.
Why do plastic eyes melt?
Plastic eyes can be damaged by abrasive items removing ink or gouging into the plastic, and heat can melt it.
How many times has wikihow been viewed?
To create this article, volunteer authors worked to edit and improve it over time. This article has been viewed 16,642 times.
How to dry hair on stuffed animals?
Hair dry on low if you have had to wash the stuffed animal as well. Alternatively, wash on a lovely warm day and air dry outside, under a porch or shaded area (being careful to avoid birds that might leave a mark).
How to get rid of a swollen ear?
1. Make a weak solution of warm soapy water. Use gentle dish soap or baby shampoo. Note: You may like to see whether water alone is sufficient before using any detergent. ...
How to remove stuffing from bear?
If your bear does not already have a hole in a seam through which the stuffing can be removed, very carefully open a straight seam (such as the back seam) by cutting the seam thread with a pair of scissors, a very sharp knife, or a seam ripper. Remove all of the stuffing and discard. 2.
What causes a teddy bear to be hard?
Don't overstuff your bear. This will cause your teddy bear to be hard, not fluffy.
What to use to wash a bear?
Scissors. Thimble (if sewing with a needle and thread) A bag of natural cotton or polyester fiberfill (approximately six times the size of the bear) An alternative to fiberfill stuffing is worn out panty hose. If you choose to use this you won't need to take the stuffing out of the bear next time you wash it.
What to do if your teddy is dusty?
If your teddy feels a bit dusty or makes you cough, gently tube vacuum it! It works great! You could wipe him/her with a wet wipe if she/he is dirty.
What to do if you still have a teddy bear face?
If you still have the face, try to sew it back on. If not, you could use some fabric and button eyes. The teddy may not look perfect this way, but at least it'll have a face.
How long will a refurbished teddy bear be good?
Take care of your newly refurbished teddy. It'll be good for decades to come.
What to say to a boy who is going to hospital?
Tell him he is going to hospital and has to have an operation and make it fun. After all, he will love his new look at the end and so will you.
How to make a teddy bear eye?
Firstly you will need to cut open a seam nearest to the eye. Make sure you cut the stitching and not the fabric. You’ll need to open the seam two and a half to three inches. You can see where teddy’s eye goes at the end of the seam in this photo. Teddy will look a bit trashed at this point but don’t be scared!
How to hide a seam in a sleeve?
Take a pin and gently pluck any fur that is stuck in the seam out of the stitching and give it a little brush to fluff it up. This will help hide the seam as much as possible.
How do safety eyes work?
Safety eyes have an eye with a post and a washer that has to be firmly pushed onto the post to hold the eye in place. Never put the washer on the eye before you have it in place on your toy. It will be extremely difficult to get it off, and you may have to buy another washer.
How many inches do you need to open a seam?
You’ll need to open the seam two and a half to three inches.
Can you replace a safety eye on a teddy bear?
You can always sew up the hole and add a button or an eye patch, but it’s also possible to replace a safety eye if you take the right steps.
