how do you fix low beam headlights

How do you fix low beam headlights?

• Find the blown out bulb.
• Buy the replacement bulb.
• Get your tools ready.
• Disconnect the negative terminal on the battery.
• Remove the trim pieces.
• Find the headlight holder.
• Disconnect the cables from the headlight.
• Remove the headlight bulb from the bulb housing.

Full Answer

What should I do if my low beam headlights are not working?

If the problem is electrical, it is important to take the vehicle to a qualified mechanic for diagnosis and repair. In some cases, there is nothing wrong with the low-beam headlights other than the fact that the headlight covers have become cloudy or dirty, preventing light from escaping.

How do I fix a burned-out headlight?

Fixing a burned-out headlight is usually a pretty easy job, but there are cases where you may want to go straight to a mechanic. If you don't own some basic car tools and diagnostic equipment, like screwdrivers and a voltmeter, then you may want to think about taking your car to a professional during daylight hours.

Can a blown out low beam bulb be fixed?

A blown out low beam bulb can make it difficult to see at night and driving with your high beams on all the time can make it difficult for other drivers to see. Fortunately, fixing a bad low beam is a straight forward process in the majority of vehicles that can be done by most people without just a few hand tools.

How do you swap a low beam bulb?

Swapping a low beam bulb can require varying amounts of work. While some cars may require no tools at all, others may require specialized tools to help remove portions of the trim under the hood, or even the bumper and grill. Refer to the service manual for your specific vehicle for a comprehensive list of tools required for the job.

Why is my low beam not working?

Headlight Fuse or Relay If a headlight fuse blows, it could cause the headlights to stop working. Most headlight systems are also designed with a relay that switches the power between low beam and high beam headlights. If this relay goes bad, it could allow power to the high beams, but not the low beams.

How much does it cost to fix low beam headlights?

Solution: Replace the Headlight Assembly The price of a good-quality headlight assembly can be anywhere in the range of $250-$700. And, if you have LED headlights in your car, your cost may increase even more.

Why do my low beams not work but high beams do?

Since the low beams are used the most, they tend to burn our much sooner than the high beams. If your low beams stop working but the high beams still turn on, there's a good chance that simply replacing the headlight bulbs with new OEM headlights will solve the problem.

How do I know if my headlight fuse is blown?

2:445:46Does My Car Have a Bad Fuse Or Bad Bulb? - YouTubeYouTubeStart of suggested clipEnd of suggested clipLook at that you can see right up inside that plastic that those two little ends right there thoseMoreLook at that you can see right up inside that plastic that those two little ends right there those were actually supposed to be connected. This fuse right here is cooked blown.

Can I replace a headlight bulb myself?

Close the hood of your car. With the new bulb in place, your headlights should once again be as good as new, and you can once again enjoy driving your car day or night. Most times, changing a headlight is straightforward and doesn't require taking your car to a mechanic.

Do mechanics change headlights?

In some cases, the wiring or housing of your headlight may need to be repaired or replaced, which can cost a few hundred pounds. A mechanic will be able to better diagnose what's wrong with your headlights and assist you in figuring out the best solution.

How do I know if my low beam relay is bad?

The most common sign of a bad headlight relay is headlights that don't work. A headlight relay will typically fail in the open position, preventing voltage from reaching the headlights. If the low beam relay fails, the low beams won't work.

Where is the low beam headlight fuse located?

If your headlights have stopped working, locate the fuse in your car connected to the low-beam headlights circuit. The fuse box is typically located under the hood or behind the dashboard. You can often find this information in your owner's manual or on the inside of the fuse box cover.

Where is the low beam relay located?

Usually, it is under the hood of the car. The point where your fuse panel is most likely located. On the other hand, it may also be located inside the cab of the car, this would be the case if your car comes with an interior fuse box.

Does one fuse control both headlights?

The first, and easiest, component to check is the headlight fuse. Depending on how your headlight circuit is set up, there may be one fuse or multiple fuses for the headlights. If you find a blown fuse, then replacing it may fix the problem.

How much does a headlight fuse cost?

Depending on the make and model of the fuse, the cost to have it replaced can vary. Most common fuses are $10 to $20, although some specialty ones can cost more than $100 to replace.

How do you tell which headlight is out?

0:133:43How To Tell What Type of Headlights You Have - LED, HID, or Halogen!YouTubeStart of suggested clipEnd of suggested clipPull up to a garage door and just check it out look at the beam pattern. And if it's a yellow colorMorePull up to a garage door and just check it out look at the beam pattern. And if it's a yellow color it has a normal power up time that tends to be a halogen bulb.