27 February 2017 by Tamara Taylor
- First of all you will need to remove the teddy bear's head. ...
- Use a pair of scissors to push a small hole in the bear's fabric where you want the eye to go.
- Take a piece of dental floss and thread it through the eye of a long, thick needle with a large eye. ...
- Use the original eye, if possible. ...
- Choose a thread that will blend in with the color of the stuffed animal.
- Place the button eye in the appropriate spot on the stuffed animal's head. ...
- Perform another stitch, this time going from the back of the head to the front.
How do you fix a Teddy’s eye seam?
Sew the rest of the seam closed and fasten off the thread. You’ll notice that the seam is still pretty visible, and teddy’s eye is a bit bulgy. Take a pin and gently pluck any fur that is stuck in the seam out of the stitching and give it a little brush to fluff it up.
How do you fix a teddy bear that has holes?
Turn the teddy bear inside out to examine each seam for holes and to examine the thread which may be, if the teddy bear is very old, weak and rotten. Sew the holes closed and reinforce the seams as needed, using either a needle and thread or a sewing machine.
How do you make a Teddy’s eye?
My teddy’s eye is at the end of a seam, but this process will work even if it isn’t. Firstly you will need to cut open a seam nearest to the eye. Make sure you cut the stitching and not the fabric. You’ll need to open the seam two and a half to three inches. You can see where teddy’s eye goes at the end of the seam in this photo.
What to do if a stuffed animal loses an eye?
How to Replace Eyes on Stuffed Animals. When your child's stuffed animal loses an eye, don't throw the toy away. Instead, replace the eye and the toy will be as good as new. Even if you have no sewing experiencing, replacing eyes on a stuffed animal is easy. Just follow the instructions below. Use the original eye, if possible.
How can I restore my stuffed animals eyes?
Apply the toothpaste to the toy's eyes, working in circular motions, right to the edge of each eye. Now, use a clean, damp cloth to wipe away the toothpaste in a circular polishing motion. Dry the eyes with a clean cloth. If any toothpaste has spread onto the plush toy's fabric, use a dampened cotton bud to remove it.
How do you glue stuffed animal eyes?
Felt fabric is easy to find and can be cut into the shape you want to make your animal eyes. Use can use craft glue or a hot glue gun to glue the felt eyes to your plushie or stitch it on along the edges.
How are teddy bear eyes attached?
Glass eyes should not be stitched in like a button, they will wobble around. These eyes must be tied in so that the wire loop slips down in behind the fabric and the eye sits snugly on the surface. For insertion of glass eyes the head is stuffed first.
How do you make teddy look new again?
6 Techniques In Making Stuffed Toys Soft & Fluffy AgainCarefully Handwash It.Use A Conditioner.Use Clothes Dryer with Softener Sheets.Use A Towel & Rub It Dry.Brush Its Fur.Use Steam Cleaner (If With Electronics)Soak The Stuffed Animal In Fabric Softener.Brush It Down.More items...•
How do you fix a stuffed animal nose?
Cut your fabric a little bit larger than the cardboard.Lay down your aluminum foil, then the fabric and finally the cardboard. Fold the foil around the cardboard so the fabric is sandwiched nicely in between.Iron the foil on the top and bottom. ... Remove your perfectly pressed nose and hand stitch it in place.
How do you attach doll eyes?
1:455:41How to use Safety eyes for plush & amigurumi - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd again if you were working with a sewn piece of fabric. You would cut a tiny little hole reallyMoreAnd again if you were working with a sewn piece of fabric. You would cut a tiny little hole really only enough for the post to go through.
How do you sew button eyes on a stuffed animal?
1:3811:00Sewing button eyes on your bear - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo i need to go. Down. The opposite hole and i'm going to grab a little bit of fabric not much. AndMoreSo i need to go. Down. The opposite hole and i'm going to grab a little bit of fabric not much. And pull it nice and tight.
How do you apply Amigurumi eyes?
1:224:28How to Insert Safety Eyes for Amigurumi - YouTubeYouTubeStart of suggested clipEnd of suggested clipInto the crochet fabric to make a hole. And then i just insert the eye. There so putting your hookMoreInto the crochet fabric to make a hole. And then i just insert the eye. There so putting your hook into it makes it easier to just slip the eye. In. So that's one eye.
What age are safety eyes for stuffed animals?
3 years oldThey're measured in millimeters, which represent the diameter of the eye. Safety eyes aren't safe for children younger than 3 years old, or pets. If you don't want to use safety eyes, simply embroider them on instead.
How do you make a build a bear fluffy again?
If your Build-A-Bear comes out of your washing and drying process with matted fur, you can easily remedy this with a wire brush. Select a hand brush with thin wires, like one you might use as a dog grooming brush. The thin wire bristles will quickly fluff up the fur.
How do you fix a lumpy stuffed animal?
The first thing to do is go to a fabric or craft store and get polyester fiberfill stuffing. Polyester fiberfill is the best thing for re-stuffing as it is both hand and machine washable. You can even put it in the dryer with the worry of it bunching up and distorting the shape of the animal.
How do you get wrinkles out of plush?
If the plush fabric still looks very wrinkled, and it's not a poor-quality plush, try using a soft brush to give it some additional fluffing and even out the pile of the fabric. If the "wrinkled" property you're describing is uneven stuffing, try fluffing it like a pillow to redistribute the stuffing and even it out.
How do you attach glass eyes?
0:262:15How to attach Glass eyes on a wire - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you just keep on felting you create a tunnel. And then that wire can pop through that using wireMoreIf you just keep on felting you create a tunnel. And then that wire can pop through that using wire cutters I cut the wire in half and then slide the pair of eyes through the dog.
How do you sew plush eyes?
2:214:40How to Install Eyes and Noses on Stuffed Animals | Whitney SewsYouTubeStart of suggested clipEnd of suggested clipI just slowly poke the blade of the scissor. Further into the fabric. And make the hole larger thatMoreI just slowly poke the blade of the scissor. Further into the fabric. And make the hole larger that way when the hole is just large enough push the post of the eye into it as far as it will go.
How do you make a stuffed animal eye?
0:0014:56DIY Eyes for stuffed animals and crafts - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis is how to make eyes for craft projects and stuffed animals.MoreThis is how to make eyes for craft projects and stuffed animals.
How do you sew button eyes on a stuffed animal?
1:3811:00Sewing button eyes on your bear - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo i need to go. Down. The opposite hole and i'm going to grab a little bit of fabric not much. AndMoreSo i need to go. Down. The opposite hole and i'm going to grab a little bit of fabric not much. And pull it nice and tight.
How to get tail thread out of stuffed animal?
Starting at one end of the incision, insert the needle through a small section of the fabric, pull until the tail end of the thread is about 2 inches from being pulled through the fabric. Grab the tail of the thread and tie it to the base of the thread you pulled through the fabric. Tuck the short excess tail thread into the stuffed animal.
How to make a stuffed animal incision?
Using a pair of scissors, make an incision approximately 3 inches in length along the middle major seam on the back of the stuffed animal (a seam ripper may also be used to open an existing seam).
How to attach a button to a stuffed animal?
Before you begin, place the button in the location where you would like it to be attached. Attach your thread to the stuffed animal in this location, and thread the button onto the needle.
What to do if a stuffed animal loses its eye?
When your child's stuffed animal loses an eye, don't throw the toy away. Instead, replace the eye and the toy will be as good as new. Even if you have no sewing experiencing, replacing eyes on a stuffed animal is easy. Just follow the instructions below. Advertisement.
How to attach a button eye to a stuffed animal?
Place the button eye in the appropriate spot on the stuffed animal's head. Using a needle and the appropriate thread, attach the eye to the head by stitching through the entire head of the animal. Pull the thread completely through to the back.
Introduction
Teddy Ruxpin’s eyes are LED and will react to story-time. If the eyes are glitching, not turning on, or malfunctioning in any way, follow this guide to replace them. Be cautious during desoldering and keep track of screws. Refer to the desoldering guide for help.
Step 2
Pull the tab outward to remove the protective plate for the batteries.
Step 3
Remove all four AA batteries by pushing the positive end down and pulling the battery out toward yourself.
Step 11 Eyes
Using a Phillips #1 screwdriver, remove the two 12.5mm screws connecting the eyes to the rest of the mechanism.
Step 12
Unplug the two sets of wires connected to the back of the eyes by using moderate to high force.
Step 13
Once those wires are disconnected, desolder the wires connected from the eye motherboard.
What to do if you still have a teddy bear face?
If you still have the face, try to sew it back on. If not, you could use some fabric and button eyes. The teddy may not look perfect this way, but at least it'll have a face.
What to do if your bear doesn't have a hole?
If your bear does not have a hole that needs to be repaired through which you can remove the stuffing, be sure to make a hole just big enough to remove the stuff, as you will have to sew this hole closed when you are finished.
How to remove stuffing from bear?
If your bear does not already have a hole in a seam through which the stuffing can be removed, very carefully open a straight seam (such as the back seam) by cutting the seam thread with a pair of scissors, a very sharp knife, or a seam ripper. Remove all of the stuffing and discard. 2.
What causes a teddy bear to be hard?
Don't overstuff your bear. This will cause your teddy bear to be hard, not fluffy.
What to use to wash a bear?
Scissors. Thimble (if sewing with a needle and thread) A bag of natural cotton or polyester fiberfill (approximately six times the size of the bear) An alternative to fiberfill stuffing is worn out panty hose. If you choose to use this you won't need to take the stuffing out of the bear next time you wash it.
What to do if your teddy is dusty?
If your teddy feels a bit dusty or makes you cough, gently tube vacuum it! It works great! You could wipe him/her with a wet wipe if she/he is dirty.
How long will a refurbished teddy bear be good?
Take care of your newly refurbished teddy. It'll be good for decades to come.
How to clean a toy with plastic eyes?
Start with clean hands whenever cleaning a toy. Check what the eyes are made of. Plastic eyes can be damaged by abrasive items removing ink or gouging into the plastic, and heat can melt it. Glass eyes can chip, crack or break if mishandled. Decide whether to spot clean or wash the toy completely.
How to clean eyes with soapy water?
Use a soft cloth to dip into the soapy water. Wring out the water so that the cloth is only damp, then use it to wipe the eyes. Avoid getting water behind or in the eyes. The cloth must only be damp, not saturated and wet.
Why do plastic eyes melt?
Plastic eyes can be damaged by abrasive items removing ink or gouging into the plastic, and heat can melt it.
How to dry hair on stuffed animals?
Hair dry on low if you have had to wash the stuffed animal as well. Alternatively, wash on a lovely warm day and air dry outside, under a porch or shaded area (being careful to avoid birds that might leave a mark).
How to get rid of a swollen ear?
1. Make a weak solution of warm soapy water. Use gentle dish soap or baby shampoo. Note: You may like to see whether water alone is sufficient before using any detergent. ...
How to clean eyelashes?
Regular, quick cleans can be done using a warm, moist tissue wiped over the eye. This will remove dust and debris. It can also be used on eyelashes, if any.
Can you wash stuffed animals with glass eyes?
The pillow case will protect the eyes. It is not recommended that any stuffed toy with glass eyes, moving eyes or eyelashes be washed in a machine. Doing so will likely harm these areas of the toy. Hair dry on low if you have had to wash the stuffed animal as well.
How to apply toothpaste to a toy's eyes?
Apply the toothpaste to the toy's eyes, working in circular motions, right to the edge of each eye.
How to dry eyes?
Dry the eyes thoroughly with a clean, soft cloth or a duster.
How to get toothpaste off a plush toy?
If any toothpaste has spread onto the plush toy's fabric, use a dampened cotton bud to remove it. When the fabric is dry, use your fingers to fluff it up again.
Why should old toys be replaced?
Old toys whose eyes have worked loose and might come out during play could present a danger to your child and should be replaced for safety reasons. In this case, why not sit down with your child and check out a soft toy distributor's website to see what new toys are available?
