The top ways to unstick a fishing rod are:
- Behind the knees method – hold the rod behind your knees, use your legs to push against your hands to separate the sections.
- Cool the joint to shrink it enough to slide out.
- Two person – arms crossing and working together to pull the sections apart.
How do you remove a pole from a tree?
One person to grip each pole section and PULL firmly but not too hard. On no naccount try to twist the pole this may lead to a damaged pole. The third person needs to hold the pole either side of the joint loosely withiout gripping it. They then rock the pole with a circular motion (a little like someone working a mangle but on a reduced scale).
How to break a pole without breaking it?
If you are alone a much less efective method is to poour some weater inside the pole to the joints. Then use a hairdryer inside the pole. this might be enough to do the job. This worked for me once before I learned the other technique. Good luck and remember brute force will only break the pole. More sharing options...
How do I remove a broken section of wire from pole?
Might sound daft but get an electric razor pressed against the end and leave it on for a few minutes. The vibrations shift the microscopic dust/gubbins between the sections and with a pull on the 11m section it might come out. Borrow another 13m section off the same pole insert into 11.5m section turn and twist.
Can you get lubricant in between pole sections?
HELP! Being the numpty i am one of my pole sections has stuck inside another (probably due to me not wiping it down after use). Ive tried washing up liquid and brute force but nothing will budge it. Its a really really tight fit so getting lubricant inbetween the sections is virtually impossible.
Why aren't my rod sections coming apart?
How many people do you need to grip a pole?
What happens if you tap on a hard surface?
Does bread uner work?
Can you believe anything anyone says?
How do you unstick a fishing pole?
0:522:52HOW TO GET A STUCK ROD APART - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you use your outer thighs to push against your hands your leg muscles are much stronger thanMoreAnd you use your outer thighs to push against your hands your leg muscles are much stronger than your arm muscles. And you just you just pull your knees apart. And the rod will come unstuck.
How do you release a stuck telescopic fishing pole?
3:004:44Tenkara USA rods - freeing stuck segments - YouTubeYouTubeStart of suggested clipEnd of suggested clipTwo fingers on both sides and the loops. Pull it up and let it go down you know what this does isMoreTwo fingers on both sides and the loops. Pull it up and let it go down you know what this does is that ensures you never put cyber pressure where you never have a chance of bending it to the breaker.
How do you get a stuck two piece rod apart?
2:274:30Surf Fishing Rod Care - Stuck Ferrules - taking apart 2 piece rod - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis could take anywhere from five minutes to sometimes a couple of hours if a ride is stuck reallyMoreThis could take anywhere from five minutes to sometimes a couple of hours if a ride is stuck really bad it'll take a couple of hours for this to work you want to get it really cold.
How do you get a stuck surfboard rod apart?
Put the rod behind your legs, grab either section on the outside of said knees and apply outward leg pressure. Another approach is to sit down with knees raised in front of you. If contractions are five minutes apart and last longer than 60 seconds, get to a fly shop or hospital. Get a Grip.
How do you lubricate a rod joint?
1:182:25Fishing Hack #4 - How to Make Stiff Rod Joints a Thing of The PastYouTubeStart of suggested clipEnd of suggested clipYou can just run your pencil all the way over it. Like so and that acts as a dry lubricant. All themMoreYou can just run your pencil all the way over it. Like so and that acts as a dry lubricant. All them tiny graphite particles all on there.
Do all fishing poles come apart?
Fishing rods come apart in different ways, depending on the type of fishing rod. They can come apart in three pieces (baitcasting and fly-fishing rods), two pieces (spinning and trolling rods), or one piece (some spinning and trolling rods).
What is a spigot ferrule?
A “spigot ferrule” or “internal ferrule” involves a separate piece that is bonded to the inside of the lower section, producing a protruding tube that the top section slides on. When an internal ferrule is properly seated, there is a 1/8- to 1/2-inch gap between the two sections.
How do you use ferrule wax?
0:040:45Handy Tips: Waxing Rod Ferrules - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe part where the two rods joined together with a little bit of candle wax you don't need much. AndMoreThe part where the two rods joined together with a little bit of candle wax you don't need much. And you'll find that that will give you a nice secure.
Why aren't my rod sections coming apart?
Whilst the method Worm describes is very effective in extreme cases, quite often the cause of the sections not comming apart is simpley because when being pulled (by one or two people)you are actually bending the joint making it stick.The way around this is for two people to grasp the two sections,each person having one hand on each section either side of the joint.Both people then pull with one hand whilst pushing with the other.This ensures that the sections are not bent and usualy frees them.Works really well on stuck rod sections as well.
How many people do you need to grip a pole?
First you need 3 people. One person to grip each pole section and PULL firmly but not too hard. On no naccount try to twist the pole this may lead to a damaged pole. The third person needs to hold the pole either side of the joint loosely withiout gripping it.
What happens if you tap on a hard surface?
If it is then a sharp tap on a hard surface will dislodge the one stuck inside........ note I said TAP, not a massive wallop.
Does bread uner work?
If you have a slice of bread uner your hands it gives a really good grip. I thought this was a wind up when someone suggested it to me but it really does work.
Can you believe anything anyone says?
Believe NOTHING anyones says or writes unless you witness it yourself and even then your eyes can deceive you
How to break a suction pole?
The third person takes the joint in their hand and gently rocks the joint in a slightly circular motion. You are looking for the suction (caused most probably by dampness)to be broken. When the suction is broken the two people pulling the sections apart will be doing it so gently that the sections come apart very slowly. You will often hear a slight crack - this is not the pole breaking but the sound of the suction being broken. As you can see, this is not about brute force but technique.
What happens when suction is broken?
When the suction is broken the two people pulling the sections apart will be doing it so gently that the sections come apart very slowly. You will often hear a slight crack - this is not the pole breaking but the sound of the suction being broken. As you can see, this is not about brute force but technique.
How many hands do you need to turn a joint?
Needs three of you, two to turn the sections, with their hands around the joints.
Does WD40 help with sticking?
Incidently, the WD40 has probably added to the problem rather than help solve it. If these two joints have a habit of sticking together then rub a little candle wax on them at the start of each session don't use any other type of oil or grease. That will solve the problem of them sticking.
Does a sprite need a few thumps?
It sometimes needs a few thumps , but the shock and the weight of the stuck section should free them.
Why aren't my rod sections coming apart?
Whilst the method Worm describes is very effective in extreme cases, quite often the cause of the sections not comming apart is simpley because when being pulled (by one or two people)you are actually bending the joint making it stick.The way around this is for two people to grasp the two sections,each person having one hand on each section either side of the joint.Both people then pull with one hand whilst pushing with the other.This ensures that the sections are not bent and usualy frees them.Works really well on stuck rod sections as well.
How many people do you need to grip a pole?
First you need 3 people. One person to grip each pole section and PULL firmly but not too hard. On no naccount try to twist the pole this may lead to a damaged pole. The third person needs to hold the pole either side of the joint loosely withiout gripping it.
What happens if you tap on a hard surface?
If it is then a sharp tap on a hard surface will dislodge the one stuck inside........ note I said TAP, not a massive wallop.
Does bread uner work?
If you have a slice of bread uner your hands it gives a really good grip. I thought this was a wind up when someone suggested it to me but it really does work.
Can you believe anything anyone says?
Believe NOTHING anyones says or writes unless you witness it yourself and even then your eyes can deceive you
